Anyone got a CJ7 Steering shaft?
#11
Guest
Posts: n/a
Re: Anyone got a CJ7 Steering shaft?
Sorry Mike,
I understand. I hope you get some income soon.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:466ab394$0$18858$9a6e19ea@unlimited.newshosti ng.com...
>I haven't had 'any' income since last August so am looking for a cheap used
>one to get me by.
>
> As mentioned, I can get mine rebuilt with grease fittings on the joints
> for a couple hundred.
>
> Mike
>
> Anthony T wrote:
>> Mike,
>> I replaced my factory steering shaft with a Borgeson. They're pricey
>> ($240) but it was a very noticeable improvement. I thought my steering
>> box was going bad because the steering was all over the place. Just by
>> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
>> drives straight as an arrow now. I dont work for Borgeson, but I can
>> tell you from experience, it's a great product...and great customer
>> service. my two cents.
>>
>> http://www.borgeson.com/TruckProductJeep.htm
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>>> the lower u-joint and needs to get replaced.
>>>
>>> I can get it rebuilt locally with greasable u-joints for about $175.00 I
>>> think it is, but really don't have the cash right now.
>>>
>>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>>> totally shot they would part with reasonably?
>>>
>>> I'll trade an old 88 Cherokee for a new one. :-)
>>>
>>> Thanks,
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>
I understand. I hope you get some income soon.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:466ab394$0$18858$9a6e19ea@unlimited.newshosti ng.com...
>I haven't had 'any' income since last August so am looking for a cheap used
>one to get me by.
>
> As mentioned, I can get mine rebuilt with grease fittings on the joints
> for a couple hundred.
>
> Mike
>
> Anthony T wrote:
>> Mike,
>> I replaced my factory steering shaft with a Borgeson. They're pricey
>> ($240) but it was a very noticeable improvement. I thought my steering
>> box was going bad because the steering was all over the place. Just by
>> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
>> drives straight as an arrow now. I dont work for Borgeson, but I can
>> tell you from experience, it's a great product...and great customer
>> service. my two cents.
>>
>> http://www.borgeson.com/TruckProductJeep.htm
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>>> the lower u-joint and needs to get replaced.
>>>
>>> I can get it rebuilt locally with greasable u-joints for about $175.00 I
>>> think it is, but really don't have the cash right now.
>>>
>>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>>> totally shot they would part with reasonably?
>>>
>>> I'll trade an old 88 Cherokee for a new one. :-)
>>>
>>> Thanks,
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>
#12
Guest
Posts: n/a
Re: Anyone got a CJ7 Steering shaft?
Sorry Mike,
I understand. I hope you get some income soon.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:466ab394$0$18858$9a6e19ea@unlimited.newshosti ng.com...
>I haven't had 'any' income since last August so am looking for a cheap used
>one to get me by.
>
> As mentioned, I can get mine rebuilt with grease fittings on the joints
> for a couple hundred.
>
> Mike
>
> Anthony T wrote:
>> Mike,
>> I replaced my factory steering shaft with a Borgeson. They're pricey
>> ($240) but it was a very noticeable improvement. I thought my steering
>> box was going bad because the steering was all over the place. Just by
>> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
>> drives straight as an arrow now. I dont work for Borgeson, but I can
>> tell you from experience, it's a great product...and great customer
>> service. my two cents.
>>
>> http://www.borgeson.com/TruckProductJeep.htm
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>>> the lower u-joint and needs to get replaced.
>>>
>>> I can get it rebuilt locally with greasable u-joints for about $175.00 I
>>> think it is, but really don't have the cash right now.
>>>
>>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>>> totally shot they would part with reasonably?
>>>
>>> I'll trade an old 88 Cherokee for a new one. :-)
>>>
>>> Thanks,
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>
I understand. I hope you get some income soon.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:466ab394$0$18858$9a6e19ea@unlimited.newshosti ng.com...
>I haven't had 'any' income since last August so am looking for a cheap used
>one to get me by.
>
> As mentioned, I can get mine rebuilt with grease fittings on the joints
> for a couple hundred.
>
> Mike
>
> Anthony T wrote:
>> Mike,
>> I replaced my factory steering shaft with a Borgeson. They're pricey
>> ($240) but it was a very noticeable improvement. I thought my steering
>> box was going bad because the steering was all over the place. Just by
>> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
>> drives straight as an arrow now. I dont work for Borgeson, but I can
>> tell you from experience, it's a great product...and great customer
>> service. my two cents.
>>
>> http://www.borgeson.com/TruckProductJeep.htm
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>>> the lower u-joint and needs to get replaced.
>>>
>>> I can get it rebuilt locally with greasable u-joints for about $175.00 I
>>> think it is, but really don't have the cash right now.
>>>
>>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>>> totally shot they would part with reasonably?
>>>
>>> I'll trade an old 88 Cherokee for a new one. :-)
>>>
>>> Thanks,
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>
#13
Guest
Posts: n/a
Re: Anyone got a CJ7 Steering shaft?
Sorry Mike,
I understand. I hope you get some income soon.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:466ab394$0$18858$9a6e19ea@unlimited.newshosti ng.com...
>I haven't had 'any' income since last August so am looking for a cheap used
>one to get me by.
>
> As mentioned, I can get mine rebuilt with grease fittings on the joints
> for a couple hundred.
>
> Mike
>
> Anthony T wrote:
>> Mike,
>> I replaced my factory steering shaft with a Borgeson. They're pricey
>> ($240) but it was a very noticeable improvement. I thought my steering
>> box was going bad because the steering was all over the place. Just by
>> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
>> drives straight as an arrow now. I dont work for Borgeson, but I can
>> tell you from experience, it's a great product...and great customer
>> service. my two cents.
>>
>> http://www.borgeson.com/TruckProductJeep.htm
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>>> the lower u-joint and needs to get replaced.
>>>
>>> I can get it rebuilt locally with greasable u-joints for about $175.00 I
>>> think it is, but really don't have the cash right now.
>>>
>>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>>> totally shot they would part with reasonably?
>>>
>>> I'll trade an old 88 Cherokee for a new one. :-)
>>>
>>> Thanks,
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>
I understand. I hope you get some income soon.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:466ab394$0$18858$9a6e19ea@unlimited.newshosti ng.com...
>I haven't had 'any' income since last August so am looking for a cheap used
>one to get me by.
>
> As mentioned, I can get mine rebuilt with grease fittings on the joints
> for a couple hundred.
>
> Mike
>
> Anthony T wrote:
>> Mike,
>> I replaced my factory steering shaft with a Borgeson. They're pricey
>> ($240) but it was a very noticeable improvement. I thought my steering
>> box was going bad because the steering was all over the place. Just by
>> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
>> drives straight as an arrow now. I dont work for Borgeson, but I can
>> tell you from experience, it's a great product...and great customer
>> service. my two cents.
>>
>> http://www.borgeson.com/TruckProductJeep.htm
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>>> the lower u-joint and needs to get replaced.
>>>
>>> I can get it rebuilt locally with greasable u-joints for about $175.00 I
>>> think it is, but really don't have the cash right now.
>>>
>>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>>> totally shot they would part with reasonably?
>>>
>>> I'll trade an old 88 Cherokee for a new one. :-)
>>>
>>> Thanks,
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>
Thread
Thread Starter
Forum
Replies
Last Post
Mike Romain
Jeep Mailing List
8
07-26-2007 06:43 PM
Mike Romain
Jeep Mailing List
120
03-04-2004 09:27 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)