Track arm bushings
Guest
Posts: n/a
Re: Track arm bushings
I have used a drill to drill masses of holes around it so it can be
pried out. The spring shop used a torch to burn mine out and the book
says you can use a couple big sockets and a c-clamp to push them out.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Lovs2fly wrote:
>
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
pried out. The spring shop used a torch to burn mine out and the book
says you can use a couple big sockets and a c-clamp to push them out.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Lovs2fly wrote:
>
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
Guest
Posts: n/a
Re: Track arm bushings
I have used a drill to drill masses of holes around it so it can be
pried out. The spring shop used a torch to burn mine out and the book
says you can use a couple big sockets and a c-clamp to push them out.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Lovs2fly wrote:
>
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
pried out. The spring shop used a torch to burn mine out and the book
says you can use a couple big sockets and a c-clamp to push them out.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Lovs2fly wrote:
>
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
Guest
Posts: n/a
Re: Track arm bushings
I have used a drill to drill masses of holes around it so it can be
pried out. The spring shop used a torch to burn mine out and the book
says you can use a couple big sockets and a c-clamp to push them out.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Lovs2fly wrote:
>
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
pried out. The spring shop used a torch to burn mine out and the book
says you can use a couple big sockets and a c-clamp to push them out.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Lovs2fly wrote:
>
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
Guest
Posts: n/a
Re: Track arm bushings
Burn it out, or make a press out of some sockets, short pieces of pipe, and
a threaded rod.
Earle
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:qoKdnfF8kOcO4_HZnZ2dnUVZ_t-dnZ2d@comcast.com...
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get
out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
>
>
a threaded rod.
Earle
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:qoKdnfF8kOcO4_HZnZ2dnUVZ_t-dnZ2d@comcast.com...
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get
out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
>
>
Guest
Posts: n/a
Re: Track arm bushings
Burn it out, or make a press out of some sockets, short pieces of pipe, and
a threaded rod.
Earle
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:qoKdnfF8kOcO4_HZnZ2dnUVZ_t-dnZ2d@comcast.com...
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get
out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
>
>
a threaded rod.
Earle
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:qoKdnfF8kOcO4_HZnZ2dnUVZ_t-dnZ2d@comcast.com...
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get
out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
>
>
Guest
Posts: n/a
Re: Track arm bushings
Burn it out, or make a press out of some sockets, short pieces of pipe, and
a threaded rod.
Earle
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:qoKdnfF8kOcO4_HZnZ2dnUVZ_t-dnZ2d@comcast.com...
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get
out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
>
>
a threaded rod.
Earle
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:qoKdnfF8kOcO4_HZnZ2dnUVZ_t-dnZ2d@comcast.com...
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get
out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Mike Romain
Jeep Mailing List
8
Jul 26, 2007 06:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)