Track arm bushings
 

I'm replacing my old trackarm bushing with poly. Any ideas on how to get out
the olds ones? This is for a 93 wrangler.

Thanks

Re: Track arm bushings
 

I have used a drill to drill masses of holes around it so it can be
pried out. The spring shop used a torch to burn mine out and the book
says you can use a couple big sockets and a c-clamp to push them out.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Lovs2fly wrote:
>
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get out
> the olds ones? This is for a 93 wrangler.
>
> Thanks

Re: Track arm bushings
 

I have used a drill to drill masses of holes around it so it can be
pried out. The spring shop used a torch to burn mine out and the book
says you can use a couple big sockets and a c-clamp to push them out.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Lovs2fly wrote:
>
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get out
> the olds ones? This is for a 93 wrangler.
>
> Thanks

Re: Track arm bushings
 

I have used a drill to drill masses of holes around it so it can be
pried out. The spring shop used a torch to burn mine out and the book
says you can use a couple big sockets and a c-clamp to push them out.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Lovs2fly wrote:
>
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get out
> the olds ones? This is for a 93 wrangler.
>
> Thanks

Re: Track arm bushings
 

Burn it out, or make a press out of some sockets, short pieces of pipe, and
a threaded rod.

Earle

"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:qoKdnfF8kOcO4_HZnZ2dnUVZ_t-dnZ2d@comcast.com...
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get
out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
>
>

Re: Track arm bushings
 

Burn it out, or make a press out of some sockets, short pieces of pipe, and
a threaded rod.

Earle

"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:qoKdnfF8kOcO4_HZnZ2dnUVZ_t-dnZ2d@comcast.com...
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get
out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
>
>

Re: Track arm bushings
 

Burn it out, or make a press out of some sockets, short pieces of pipe, and
a threaded rod.

Earle

"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:qoKdnfF8kOcO4_HZnZ2dnUVZ_t-dnZ2d@comcast.com...
> I'm replacing my old trackarm bushing with poly. Any ideas on how to get
out
> the olds ones? This is for a 93 wrangler.
>
> Thanks
>
>