Application charts state that they are not suitable for installation on
axles with a vaccum axle disconnect. I've heard that they can with
certain modifications. Something about drilling and installing some
sort of pin somewhere. Has anyone accomplished this mod and/or in some
other manner installed a Truetrac in a '92 YJ (or other year with the
vaccum disconnect) Dana 30? If so, how did you go about it, with what
results (good or bad). Thanks for your comments/help. Appreciate it.
John L,

 

My recommendation is to install a Warn (TM) locking hub kit. There is
really no substitute for doing things right.

Earle

"johnl" <hjl@adelphia.net> wrote in message
news:1138772647.099580.284870@g14g2000cwa.googlegr oups.com...
> Application charts state that they are not suitable for installation on
> axles with a vaccum axle disconnect. I've heard that they can with
> certain modifications. Something about drilling and installing some
> sort of pin somewhere. Has anyone accomplished this mod and/or in some
> other manner installed a Truetrac in a '92 YJ (or other year with the
> vaccum disconnect) Dana 30? If so, how did you go about it, with what
> results (good or bad). Thanks for your comments/help. Appreciate it.
> John L,
>

 

My recommendation is to install a Warn (TM) locking hub kit. There is
really no substitute for doing things right.

Earle

"johnl" <hjl@adelphia.net> wrote in message
news:1138772647.099580.284870@g14g2000cwa.googlegr oups.com...
> Application charts state that they are not suitable for installation on
> axles with a vaccum axle disconnect. I've heard that they can with
> certain modifications. Something about drilling and installing some
> sort of pin somewhere. Has anyone accomplished this mod and/or in some
> other manner installed a Truetrac in a '92 YJ (or other year with the
> vaccum disconnect) Dana 30? If so, how did you go about it, with what
> results (good or bad). Thanks for your comments/help. Appreciate it.
> John L,
>

 

My recommendation is to install a Warn (TM) locking hub kit. There is
really no substitute for doing things right.

Earle

"johnl" <hjl@adelphia.net> wrote in message
news:1138772647.099580.284870@g14g2000cwa.googlegr oups.com...
> Application charts state that they are not suitable for installation on
> axles with a vaccum axle disconnect. I've heard that they can with
> certain modifications. Something about drilling and installing some
> sort of pin somewhere. Has anyone accomplished this mod and/or in some
> other manner installed a Truetrac in a '92 YJ (or other year with the
> vaccum disconnect) Dana 30? If so, how did you go about it, with what
> results (good or bad). Thanks for your comments/help. Appreciate it.
> John L,
>

 

I am curious, does it force your driveshaft to turn?

Other than that, the drivers side axle is always engaged on a YJ.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Brian Moga wrote:
>
> I have a 91 D30 with a truetrac... No modifications made, but I do
> have an issue with the drivers side front wheel being engaged when
> 4WD is not.....
>
> Brian Moga
> Waxhaw.Net
>
> On Wed, 31 Jan 2006, johnl wrote:
>
> > Date: 31 Jan 2006 21:44:07 -0800
> > From: johnl <hjl@adelphia.net>
> > Newsgroups: rec.autos.makers.jeep+******
> > Subject: Dana 30 TrueTrac
> >
> >
> >
> > Application charts state that they are not suitable for installation on
> > axles with a vaccum axle disconnect. I've heard that they can with
> > certain modifications. Something about drilling and installing some
> > sort of pin somewhere. Has anyone accomplished this mod and/or in some
> > other manner installed a Truetrac in a '92 YJ (or other year with the
> > vaccum disconnect) Dana 30? If so, how did you go about it, with what
> > results (good or bad). Thanks for your comments/help. Appreciate it.
> > John L,
> >
> >

 

I am curious, does it force your driveshaft to turn?

Other than that, the drivers side axle is always engaged on a YJ.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Brian Moga wrote:
>
> I have a 91 D30 with a truetrac... No modifications made, but I do
> have an issue with the drivers side front wheel being engaged when
> 4WD is not.....
>
> Brian Moga
> Waxhaw.Net
>
> On Wed, 31 Jan 2006, johnl wrote:
>
> > Date: 31 Jan 2006 21:44:07 -0800
> > From: johnl <hjl@adelphia.net>
> > Newsgroups: rec.autos.makers.jeep+******
> > Subject: Dana 30 TrueTrac
> >
> >
> >
> > Application charts state that they are not suitable for installation on
> > axles with a vaccum axle disconnect. I've heard that they can with
> > certain modifications. Something about drilling and installing some
> > sort of pin somewhere. Has anyone accomplished this mod and/or in some
> > other manner installed a Truetrac in a '92 YJ (or other year with the
> > vaccum disconnect) Dana 30? If so, how did you go about it, with what
> > results (good or bad). Thanks for your comments/help. Appreciate it.
> > John L,
> >
> >

 

I am curious, does it force your driveshaft to turn?

Other than that, the drivers side axle is always engaged on a YJ.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Brian Moga wrote:
>
> I have a 91 D30 with a truetrac... No modifications made, but I do
> have an issue with the drivers side front wheel being engaged when
> 4WD is not.....
>
> Brian Moga
> Waxhaw.Net
>
> On Wed, 31 Jan 2006, johnl wrote:
>
> > Date: 31 Jan 2006 21:44:07 -0800
> > From: johnl <hjl@adelphia.net>
> > Newsgroups: rec.autos.makers.jeep+******
> > Subject: Dana 30 TrueTrac
> >
> >
> >
> > Application charts state that they are not suitable for installation on
> > axles with a vaccum axle disconnect. I've heard that they can with
> > certain modifications. Something about drilling and installing some
> > sort of pin somewhere. Has anyone accomplished this mod and/or in some
> > other manner installed a Truetrac in a '92 YJ (or other year with the
> > vaccum disconnect) Dana 30? If so, how did you go about it, with what
> > results (good or bad). Thanks for your comments/help. Appreciate it.
> > John L,
> >
> >

 

I have a 91 D30 with a truetrac... No modifications made, but I do
have an issue with the drivers side front wheel being engaged when
4WD is not.....

Brian Moga
Waxhaw.Net

On Wed, 31 Jan 2006, johnl wrote:

> Date: 31 Jan 2006 21:44:07 -0800
> From: johnl <hjl@adelphia.net>
> Newsgroups: rec.autos.makers.jeep+******
> Subject: Dana 30 TrueTrac
>
>
>
> Application charts state that they are not suitable for installation on
> axles with a vaccum axle disconnect. I've heard that they can with
> certain modifications. Something about drilling and installing some
> sort of pin somewhere. Has anyone accomplished this mod and/or in some
> other manner installed a Truetrac in a '92 YJ (or other year with the
> vaccum disconnect) Dana 30? If so, how did you go about it, with what
> results (good or bad). Thanks for your comments/help. Appreciate it.
> John L,
>
>

 

I have a 91 D30 with a truetrac... No modifications made, but I do
have an issue with the drivers side front wheel being engaged when
4WD is not.....

Brian Moga
Waxhaw.Net

On Wed, 31 Jan 2006, johnl wrote:

> Date: 31 Jan 2006 21:44:07 -0800
> From: johnl <hjl@adelphia.net>
> Newsgroups: rec.autos.makers.jeep+******
> Subject: Dana 30 TrueTrac
>
>
>
> Application charts state that they are not suitable for installation on
> axles with a vaccum axle disconnect. I've heard that they can with
> certain modifications. Something about drilling and installing some
> sort of pin somewhere. Has anyone accomplished this mod and/or in some
> other manner installed a Truetrac in a '92 YJ (or other year with the
> vaccum disconnect) Dana 30? If so, how did you go about it, with what
> results (good or bad). Thanks for your comments/help. Appreciate it.
> John L,
>
>

 

I have a 91 D30 with a truetrac... No modifications made, but I do
have an issue with the drivers side front wheel being engaged when
4WD is not.....

Brian Moga
Waxhaw.Net

On Wed, 31 Jan 2006, johnl wrote:

> Date: 31 Jan 2006 21:44:07 -0800
> From: johnl <hjl@adelphia.net>
> Newsgroups: rec.autos.makers.jeep+******
> Subject: Dana 30 TrueTrac
>
>
>
> Application charts state that they are not suitable for installation on
> axles with a vaccum axle disconnect. I've heard that they can with
> certain modifications. Something about drilling and installing some
> sort of pin somewhere. Has anyone accomplished this mod and/or in some
> other manner installed a Truetrac in a '92 YJ (or other year with the
> vaccum disconnect) Dana 30? If so, how did you go about it, with what
> results (good or bad). Thanks for your comments/help. Appreciate it.
> John L,
>
>