Dana 30 TrueTrac
Application charts state that they are not suitable for installation on
axles with a vaccum axle disconnect. I've heard that they can with certain modifications. Something about drilling and installing some sort of pin somewhere. Has anyone accomplished this mod and/or in some other manner installed a Truetrac in a '92 YJ (or other year with the vaccum disconnect) Dana 30? If so, how did you go about it, with what results (good or bad). Thanks for your comments/help. Appreciate it. John L, |
Re: Dana 30 TrueTrac
My recommendation is to install a Warn (TM) locking hub kit. There is
really no substitute for doing things right. Earle "johnl" <hjl@adelphia.net> wrote in message news:1138772647.099580.284870@g14g2000cwa.googlegr oups.com... > Application charts state that they are not suitable for installation on > axles with a vaccum axle disconnect. I've heard that they can with > certain modifications. Something about drilling and installing some > sort of pin somewhere. Has anyone accomplished this mod and/or in some > other manner installed a Truetrac in a '92 YJ (or other year with the > vaccum disconnect) Dana 30? If so, how did you go about it, with what > results (good or bad). Thanks for your comments/help. Appreciate it. > John L, > |
Re: Dana 30 TrueTrac
My recommendation is to install a Warn (TM) locking hub kit. There is
really no substitute for doing things right. Earle "johnl" <hjl@adelphia.net> wrote in message news:1138772647.099580.284870@g14g2000cwa.googlegr oups.com... > Application charts state that they are not suitable for installation on > axles with a vaccum axle disconnect. I've heard that they can with > certain modifications. Something about drilling and installing some > sort of pin somewhere. Has anyone accomplished this mod and/or in some > other manner installed a Truetrac in a '92 YJ (or other year with the > vaccum disconnect) Dana 30? If so, how did you go about it, with what > results (good or bad). Thanks for your comments/help. Appreciate it. > John L, > |
Re: Dana 30 TrueTrac
My recommendation is to install a Warn (TM) locking hub kit. There is
really no substitute for doing things right. Earle "johnl" <hjl@adelphia.net> wrote in message news:1138772647.099580.284870@g14g2000cwa.googlegr oups.com... > Application charts state that they are not suitable for installation on > axles with a vaccum axle disconnect. I've heard that they can with > certain modifications. Something about drilling and installing some > sort of pin somewhere. Has anyone accomplished this mod and/or in some > other manner installed a Truetrac in a '92 YJ (or other year with the > vaccum disconnect) Dana 30? If so, how did you go about it, with what > results (good or bad). Thanks for your comments/help. Appreciate it. > John L, > |
Re: Dana 30 TrueTrac
I am curious, does it force your driveshaft to turn?
Other than that, the drivers side axle is always engaged on a YJ. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) Brian Moga wrote: > > I have a 91 D30 with a truetrac... No modifications made, but I do > have an issue with the drivers side front wheel being engaged when > 4WD is not..... > > Brian Moga > Waxhaw.Net > > On Wed, 31 Jan 2006, johnl wrote: > > > Date: 31 Jan 2006 21:44:07 -0800 > > From: johnl <hjl@adelphia.net> > > Newsgroups: rec.autos.makers.jeep+willys > > Subject: Dana 30 TrueTrac > > > > > > > > Application charts state that they are not suitable for installation on > > axles with a vaccum axle disconnect. I've heard that they can with > > certain modifications. Something about drilling and installing some > > sort of pin somewhere. Has anyone accomplished this mod and/or in some > > other manner installed a Truetrac in a '92 YJ (or other year with the > > vaccum disconnect) Dana 30? If so, how did you go about it, with what > > results (good or bad). Thanks for your comments/help. Appreciate it. > > John L, > > > > |
Re: Dana 30 TrueTrac
I am curious, does it force your driveshaft to turn?
Other than that, the drivers side axle is always engaged on a YJ. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) Brian Moga wrote: > > I have a 91 D30 with a truetrac... No modifications made, but I do > have an issue with the drivers side front wheel being engaged when > 4WD is not..... > > Brian Moga > Waxhaw.Net > > On Wed, 31 Jan 2006, johnl wrote: > > > Date: 31 Jan 2006 21:44:07 -0800 > > From: johnl <hjl@adelphia.net> > > Newsgroups: rec.autos.makers.jeep+willys > > Subject: Dana 30 TrueTrac > > > > > > > > Application charts state that they are not suitable for installation on > > axles with a vaccum axle disconnect. I've heard that they can with > > certain modifications. Something about drilling and installing some > > sort of pin somewhere. Has anyone accomplished this mod and/or in some > > other manner installed a Truetrac in a '92 YJ (or other year with the > > vaccum disconnect) Dana 30? If so, how did you go about it, with what > > results (good or bad). Thanks for your comments/help. Appreciate it. > > John L, > > > > |
Re: Dana 30 TrueTrac
I am curious, does it force your driveshaft to turn?
Other than that, the drivers side axle is always engaged on a YJ. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) Brian Moga wrote: > > I have a 91 D30 with a truetrac... No modifications made, but I do > have an issue with the drivers side front wheel being engaged when > 4WD is not..... > > Brian Moga > Waxhaw.Net > > On Wed, 31 Jan 2006, johnl wrote: > > > Date: 31 Jan 2006 21:44:07 -0800 > > From: johnl <hjl@adelphia.net> > > Newsgroups: rec.autos.makers.jeep+willys > > Subject: Dana 30 TrueTrac > > > > > > > > Application charts state that they are not suitable for installation on > > axles with a vaccum axle disconnect. I've heard that they can with > > certain modifications. Something about drilling and installing some > > sort of pin somewhere. Has anyone accomplished this mod and/or in some > > other manner installed a Truetrac in a '92 YJ (or other year with the > > vaccum disconnect) Dana 30? If so, how did you go about it, with what > > results (good or bad). Thanks for your comments/help. Appreciate it. > > John L, > > > > |
Re: Dana 30 TrueTrac
I have a 91 D30 with a truetrac... No modifications made, but I do have an issue with the drivers side front wheel being engaged when 4WD is not..... Brian Moga Waxhaw.Net On Wed, 31 Jan 2006, johnl wrote: > Date: 31 Jan 2006 21:44:07 -0800 > From: johnl <hjl@adelphia.net> > Newsgroups: rec.autos.makers.jeep+willys > Subject: Dana 30 TrueTrac > > > > Application charts state that they are not suitable for installation on > axles with a vaccum axle disconnect. I've heard that they can with > certain modifications. Something about drilling and installing some > sort of pin somewhere. Has anyone accomplished this mod and/or in some > other manner installed a Truetrac in a '92 YJ (or other year with the > vaccum disconnect) Dana 30? If so, how did you go about it, with what > results (good or bad). Thanks for your comments/help. Appreciate it. > John L, > > |
Re: Dana 30 TrueTrac
I have a 91 D30 with a truetrac... No modifications made, but I do have an issue with the drivers side front wheel being engaged when 4WD is not..... Brian Moga Waxhaw.Net On Wed, 31 Jan 2006, johnl wrote: > Date: 31 Jan 2006 21:44:07 -0800 > From: johnl <hjl@adelphia.net> > Newsgroups: rec.autos.makers.jeep+willys > Subject: Dana 30 TrueTrac > > > > Application charts state that they are not suitable for installation on > axles with a vaccum axle disconnect. I've heard that they can with > certain modifications. Something about drilling and installing some > sort of pin somewhere. Has anyone accomplished this mod and/or in some > other manner installed a Truetrac in a '92 YJ (or other year with the > vaccum disconnect) Dana 30? If so, how did you go about it, with what > results (good or bad). Thanks for your comments/help. Appreciate it. > John L, > > |
Re: Dana 30 TrueTrac
I have a 91 D30 with a truetrac... No modifications made, but I do have an issue with the drivers side front wheel being engaged when 4WD is not..... Brian Moga Waxhaw.Net On Wed, 31 Jan 2006, johnl wrote: > Date: 31 Jan 2006 21:44:07 -0800 > From: johnl <hjl@adelphia.net> > Newsgroups: rec.autos.makers.jeep+willys > Subject: Dana 30 TrueTrac > > > > Application charts state that they are not suitable for installation on > axles with a vaccum axle disconnect. I've heard that they can with > certain modifications. Something about drilling and installing some > sort of pin somewhere. Has anyone accomplished this mod and/or in some > other manner installed a Truetrac in a '92 YJ (or other year with the > vaccum disconnect) Dana 30? If so, how did you go about it, with what > results (good or bad). Thanks for your comments/help. Appreciate it. > John L, > > |
All times are GMT -4. The time now is 02:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands