Help w/check engine light. How to 'tap-out' code on 95 Cherokee straight six
Guest
Posts: n/a
Help w/check engine light. How to 'tap-out' code on 95 Cherokee straight six
Hello,
I get a 'check engine light' after ~ 30 minutes of driving. It will reset
if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
Is there a way to 'tap-out' which code is in error? I remember on an old
'85 El Camino I was able to short two leads on the test jack and count the
blinks.
Any ideas? Please help! Thanks.
Best regards,
RG
I get a 'check engine light' after ~ 30 minutes of driving. It will reset
if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
Is there a way to 'tap-out' which code is in error? I remember on an old
'85 El Camino I was able to short two leads on the test jack and count the
blinks.
Any ideas? Please help! Thanks.
Best regards,
RG
Guest
Posts: n/a
Re: Help w/check engine light. How to 'tap-out' code on 95 Cherokee straight six
RG did pass the time by typing:
> Hello,
>
> I get a 'check engine light' after ~ 30 minutes of driving. It will reset
> if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
>
> Is there a way to 'tap-out' which code is in error? I remember on an old
> '85 El Camino I was able to short two leads on the test jack and count the
> blinks.
>
> Any ideas? Please help! Thanks.
One of many reference pages.
http://minimopar.knizefamily.net/fault/index.html
--
DougW
> Hello,
>
> I get a 'check engine light' after ~ 30 minutes of driving. It will reset
> if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
>
> Is there a way to 'tap-out' which code is in error? I remember on an old
> '85 El Camino I was able to short two leads on the test jack and count the
> blinks.
>
> Any ideas? Please help! Thanks.
One of many reference pages.
http://minimopar.knizefamily.net/fault/index.html
--
DougW
Guest
Posts: n/a
Re: Help w/check engine light. How to 'tap-out' code on 95 Cherokee straight six
RG did pass the time by typing:
> Hello,
>
> I get a 'check engine light' after ~ 30 minutes of driving. It will reset
> if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
>
> Is there a way to 'tap-out' which code is in error? I remember on an old
> '85 El Camino I was able to short two leads on the test jack and count the
> blinks.
>
> Any ideas? Please help! Thanks.
One of many reference pages.
http://minimopar.knizefamily.net/fault/index.html
--
DougW
> Hello,
>
> I get a 'check engine light' after ~ 30 minutes of driving. It will reset
> if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
>
> Is there a way to 'tap-out' which code is in error? I remember on an old
> '85 El Camino I was able to short two leads on the test jack and count the
> blinks.
>
> Any ideas? Please help! Thanks.
One of many reference pages.
http://minimopar.knizefamily.net/fault/index.html
--
DougW
Guest
Posts: n/a
Re: Help w/check engine light. How to 'tap-out' code on 95 Cherokee straight six
RG did pass the time by typing:
> Hello,
>
> I get a 'check engine light' after ~ 30 minutes of driving. It will reset
> if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
>
> Is there a way to 'tap-out' which code is in error? I remember on an old
> '85 El Camino I was able to short two leads on the test jack and count the
> blinks.
>
> Any ideas? Please help! Thanks.
One of many reference pages.
http://minimopar.knizefamily.net/fault/index.html
--
DougW
> Hello,
>
> I get a 'check engine light' after ~ 30 minutes of driving. It will reset
> if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
>
> Is there a way to 'tap-out' which code is in error? I remember on an old
> '85 El Camino I was able to short two leads on the test jack and count the
> blinks.
>
> Any ideas? Please help! Thanks.
One of many reference pages.
http://minimopar.knizefamily.net/fault/index.html
--
DougW
Guest
Posts: n/a
Re: Help w/check engine light. How to 'tap-out' code on 95 Cherokeestraight six
Yes we had to short the test connection to read the code like:
http://www.geocities.com/MotorCity/B...414/codes.html Your wagon
can be read by: Shut your engine off if it is running. Turn the
ignition key to the on and off positions (do not turn the key to the
start position) within 5 seconds using this sequence: ON-OFF-ON-OFF-ON:
http://minimopar.knizefamily.net/fault/
Let us know what fault code you get.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
RG wrote:
>
> Hello,
>
> I get a 'check engine light' after ~ 30 minutes of driving. It will reset
> if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
>
> Is there a way to 'tap-out' which code is in error? I remember on an old
> '85 El Camino I was able to short two leads on the test jack and count the
> blinks.
>
> Any ideas? Please help! Thanks.
>
> Best regards,
>
> RG
http://www.geocities.com/MotorCity/B...414/codes.html Your wagon
can be read by: Shut your engine off if it is running. Turn the
ignition key to the on and off positions (do not turn the key to the
start position) within 5 seconds using this sequence: ON-OFF-ON-OFF-ON:
http://minimopar.knizefamily.net/fault/
Let us know what fault code you get.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
RG wrote:
>
> Hello,
>
> I get a 'check engine light' after ~ 30 minutes of driving. It will reset
> if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
>
> Is there a way to 'tap-out' which code is in error? I remember on an old
> '85 El Camino I was able to short two leads on the test jack and count the
> blinks.
>
> Any ideas? Please help! Thanks.
>
> Best regards,
>
> RG
Guest
Posts: n/a
Re: Help w/check engine light. How to 'tap-out' code on 95 Cherokeestraight six
Yes we had to short the test connection to read the code like:
http://www.geocities.com/MotorCity/B...414/codes.html Your wagon
can be read by: Shut your engine off if it is running. Turn the
ignition key to the on and off positions (do not turn the key to the
start position) within 5 seconds using this sequence: ON-OFF-ON-OFF-ON:
http://minimopar.knizefamily.net/fault/
Let us know what fault code you get.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
RG wrote:
>
> Hello,
>
> I get a 'check engine light' after ~ 30 minutes of driving. It will reset
> if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
>
> Is there a way to 'tap-out' which code is in error? I remember on an old
> '85 El Camino I was able to short two leads on the test jack and count the
> blinks.
>
> Any ideas? Please help! Thanks.
>
> Best regards,
>
> RG
http://www.geocities.com/MotorCity/B...414/codes.html Your wagon
can be read by: Shut your engine off if it is running. Turn the
ignition key to the on and off positions (do not turn the key to the
start position) within 5 seconds using this sequence: ON-OFF-ON-OFF-ON:
http://minimopar.knizefamily.net/fault/
Let us know what fault code you get.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
RG wrote:
>
> Hello,
>
> I get a 'check engine light' after ~ 30 minutes of driving. It will reset
> if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
>
> Is there a way to 'tap-out' which code is in error? I remember on an old
> '85 El Camino I was able to short two leads on the test jack and count the
> blinks.
>
> Any ideas? Please help! Thanks.
>
> Best regards,
>
> RG
Guest
Posts: n/a
Re: Help w/check engine light. How to 'tap-out' code on 95 Cherokeestraight six
Yes we had to short the test connection to read the code like:
http://www.geocities.com/MotorCity/B...414/codes.html Your wagon
can be read by: Shut your engine off if it is running. Turn the
ignition key to the on and off positions (do not turn the key to the
start position) within 5 seconds using this sequence: ON-OFF-ON-OFF-ON:
http://minimopar.knizefamily.net/fault/
Let us know what fault code you get.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
RG wrote:
>
> Hello,
>
> I get a 'check engine light' after ~ 30 minutes of driving. It will reset
> if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
>
> Is there a way to 'tap-out' which code is in error? I remember on an old
> '85 El Camino I was able to short two leads on the test jack and count the
> blinks.
>
> Any ideas? Please help! Thanks.
>
> Best regards,
>
> RG
http://www.geocities.com/MotorCity/B...414/codes.html Your wagon
can be read by: Shut your engine off if it is running. Turn the
ignition key to the on and off positions (do not turn the key to the
start position) within 5 seconds using this sequence: ON-OFF-ON-OFF-ON:
http://minimopar.knizefamily.net/fault/
Let us know what fault code you get.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
RG wrote:
>
> Hello,
>
> I get a 'check engine light' after ~ 30 minutes of driving. It will reset
> if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
>
> Is there a way to 'tap-out' which code is in error? I remember on an old
> '85 El Camino I was able to short two leads on the test jack and count the
> blinks.
>
> Any ideas? Please help! Thanks.
>
> Best regards,
>
> RG
Guest
Posts: n/a
Re: Help w/check engine light. How to 'tap-out' code on 95 Cherokee straight six
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:41323D37.509A87B4@***.net...
> Yes we had to short the test connection to read the code like:
> http://www.geocities.com/MotorCity/B...414/codes.html Your wagon
> can be read by: Shut your engine off if it is running. Turn the
> ignition key to the on and off positions (do not turn the key to the
> start position) within 5 seconds using this sequence: ON-OFF-ON-OFF-ON:
> http://minimopar.knizefamily.net/fault/
> Let us know what fault code you get.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> RG wrote:
> >
> > Hello,
> >
> > I get a 'check engine light' after ~ 30 minutes of driving. It will
reset
> > if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
> >
> > Is there a way to 'tap-out' which code is in error? I remember on an
old
> > '85 El Camino I was able to short two leads on the test jack and count
the
> > blinks.
> >
> > Any ideas? Please help! Thanks.
> >
> > Best regards,
> >
> > RG
Thanks LW, I'll get back in a couple of days, this is my Brothers Jeep. I
am forwarding this to him
Best regards,
RG
Guest
Posts: n/a
Re: Help w/check engine light. How to 'tap-out' code on 95 Cherokee straight six
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:41323D37.509A87B4@***.net...
> Yes we had to short the test connection to read the code like:
> http://www.geocities.com/MotorCity/B...414/codes.html Your wagon
> can be read by: Shut your engine off if it is running. Turn the
> ignition key to the on and off positions (do not turn the key to the
> start position) within 5 seconds using this sequence: ON-OFF-ON-OFF-ON:
> http://minimopar.knizefamily.net/fault/
> Let us know what fault code you get.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> RG wrote:
> >
> > Hello,
> >
> > I get a 'check engine light' after ~ 30 minutes of driving. It will
reset
> > if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
> >
> > Is there a way to 'tap-out' which code is in error? I remember on an
old
> > '85 El Camino I was able to short two leads on the test jack and count
the
> > blinks.
> >
> > Any ideas? Please help! Thanks.
> >
> > Best regards,
> >
> > RG
Thanks LW, I'll get back in a couple of days, this is my Brothers Jeep. I
am forwarding this to him
Best regards,
RG
Guest
Posts: n/a
Re: Help w/check engine light. How to 'tap-out' code on 95 Cherokee straight six
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:41323D37.509A87B4@***.net...
> Yes we had to short the test connection to read the code like:
> http://www.geocities.com/MotorCity/B...414/codes.html Your wagon
> can be read by: Shut your engine off if it is running. Turn the
> ignition key to the on and off positions (do not turn the key to the
> start position) within 5 seconds using this sequence: ON-OFF-ON-OFF-ON:
> http://minimopar.knizefamily.net/fault/
> Let us know what fault code you get.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> RG wrote:
> >
> > Hello,
> >
> > I get a 'check engine light' after ~ 30 minutes of driving. It will
reset
> > if I remove the battery cable. Once reset, it comes on ~ 30 minutes.
> >
> > Is there a way to 'tap-out' which code is in error? I remember on an
old
> > '85 El Camino I was able to short two leads on the test jack and count
the
> > blinks.
> >
> > Any ideas? Please help! Thanks.
> >
> > Best regards,
> >
> > RG
Thanks LW, I'll get back in a couple of days, this is my Brothers Jeep. I
am forwarding this to him
Best regards,
RG