Jeep JK Forum This Forum is for the X, Sahara, Rubicon and Unlimited versions of the Jeep Wrangler JK. Introduced in 2007 the JK is the latest variant of the infamous Wrangler.

Do it yourself Hardtop Dolly

Thread Tools
 
Search this Thread
 
Old Jun 17, 2011 | 10:51 AM
  #1  
o2bnajeep's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2011
Posts: 9
From: Lahave, Nova Scotia
East Do it yourself Hardtop Dolly

Here all the information you will need to construct a hardtop Dolly. I built one and it works excellent. It is nice with the casters as you can move it around your garage if needed. As well as it stores the hardtop standing up therefore saves a lot of room in the garage. This is borrowed and is not my design. That's my disclaimer. This is a must have and works well with the 4 door hardtop as well.

Do it yourself Hardtop Dolly-dolly_1.jpg

Do it yourself Hardtop Dolly-dolly_2.jpg

Do it yourself Hardtop Dolly-dolly_3.jpg
Old Jun 17, 2011 | 11:13 AM
  #2  
Mr White's Avatar
Administrator
iTrader: (1)
 
Joined: Feb 2008
Posts: 1,601
From: Quebec
Default Re: Do it yourself Hardtop Dolly

Nice, but I am weary about putting all the weight on the rear window area (it does take less space) I put mine outside on 2x6 the length plus a few inches board sitting on 2 house bricks high and put a box of moth ***** in the opening to keep animals away. But then I don't have a garage.
Old Jun 17, 2011 | 07:17 PM
  #3  
BertM's Avatar
Junior Member
 
Joined: Aug 2008
Posts: 10
Default Re: Do it yourself Hardtop Dolly

Great; thanks for posting
BertM
Old Jun 17, 2011 | 10:25 PM
  #4  
JTPhoto JK's Avatar
Senior Member
 
Joined: Aug 2009
Posts: 552
From: Thunder Bay, ON
Default Re: Do it yourself Hardtop Dolly

Good job.. As you can see from the photos, the weight is actually on the body of the top and blocks are under the hinges. There is no weight on the rear window. This is exactly like the commercial ones..

I have a very large garage so I have mine on Saw horses and my daughter's 2 dr hardtop under that. This takes about the same room as 2 roofs standing up in racks.
Old Jun 20, 2011 | 01:21 PM
  #5  
dennislai's Avatar
Junior Member
 
Joined: Apr 2011
Posts: 18
From: Toronto
Default Re: Do it yourself Hardtop Dolly

The dolly works great. I use the same plan to build the dolly a month ago when I picked up my 2011 sahara. The fact that I can roll the hardtop within the garage easily is great. If i am going to do it again, I would use a bigger wheels instead of the 2" ones - even though the 2" ones work.

The only things that gone wrong was my 12V black and decker drill ran out on me one third of the way into the project. I was upset so I went to home depot and pick up a $68 12V li-on Rigid impact driver and finish up the job in no time.
Old Jun 20, 2011 | 10:16 PM
  #6  
petenee's Avatar
Member
 
Joined: Aug 2010
Posts: 39
From: edmonton
Default Re: Do it yourself Hardtop Dolly

sweet post!!. so this will work for a 09 top ??
Old Jun 21, 2011 | 12:24 PM
  #7  
o2bnajeep's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2011
Posts: 9
From: Lahave, Nova Scotia
Default Re: Do it yourself Hardtop Dolly

I use it for my 11 4 door. I am sure it will work for 09 as well.
Old Jun 21, 2011 | 02:32 PM
  #8  
dennislai's Avatar
Junior Member
 
Joined: Apr 2011
Posts: 18
From: Toronto
Default Re: Do it yourself Hardtop Dolly

But I do strongly suggest that whoever builds it, use a bigger wheel. May be 4". It will allow you to push the hardtop outside of the garage much easier.
Old Jun 21, 2011 | 09:22 PM
  #9  
petenee's Avatar
Member
 
Joined: Aug 2010
Posts: 39
From: edmonton
Default Re: Do it yourself Hardtop Dolly

Thanks!! On the list of things todo
Old Jul 15, 2011 | 09:37 AM
  #10  
Quarryman's Avatar
Member
 
Joined: Apr 2011
Posts: 82
From: SouthWestern, ON
Default Re: Do it yourself Hardtop Dolly

Build one yesterday and it works great. Thanks for sharing this.



All times are GMT -4. The time now is 09:48 PM.

Page generated in 0.09168 seconds with 20 queries