hey everyone...if you live in or around the GTA and need some service, parts or repairs...msg me on here i check it on a pretty reg basis. I work at a dealership, now dont roll your eyes. Heres the deal. If you contact me on here though this page. I can pretty much garentee from jeep owner to another that i can match or even beat any price out there for what ever your needs are....

 

Hey Tommy,
Can you price me a passenger door power window switch assembly for a 98 jeep cherokee sport 4.0L, 4x4, automatic. My window will operate from the driver side panel but not from the passenger side. Thank you...oscarpro Brampton

 

List on the switch is $135.60 and I’ll do it for $108.24. thats 20% off

 

Hey Tommy:

I'm looking for BFG T/A KO's, 235/75 R15 or 245/75R15. I'm in Montreal but will gladly pay shipping if the tires are priced right.

 

Hiya,
Not meaning to hijack this thread but Mr. Oscarpro, are you SURE it's the switch? I've read that the wiring going into the door could become damaged thus causing the window to malfunction.
Peter.

 

Your right SAVASA it's was a malfunction in the circuit..thanks

 

Hiya,
So, Oscar what specifially was the problem? It may help others in the future.
Peter

 

They are 1/3 the price just checked an air filter for $9. CTC wanted $26. But why don't these so call cheap part places tell you where they are so you can pick up your stuff if there close by rather than shipping it.

 

Hey Tommy, Just moved to the GTA (Oakville) i've got an American 04 WJ with MPH Speedo
i'm trying to get kph speedo... just for convince...

also might be looking for a new tranny, i've got a nasty leak (cracked the housing when my inchpound wrench locked up while tightening the last bolt... one of the cracks is right down one of the bolts, tried tapping it, put in a helicoil, doesn't hold cause it just widens up) i've got JB weld on it as a bandaid which has significantly slowed the leak...-, but overnight its time to add ATF+4 and its getting expensive... but still have all my gears (when i fill it up, and it leaks out eventually, i loose automatic downshift during deceleration , but can manually go to 2nd, and getting 1st is more tricky, have to be decel and **** to 1 just before i come to a stop otherwise stays in 2nd) so i either need someone that can weld it (crack is a total of 80cm, all appears to be exposed and accessible without removal (dont really know without a welder in my hand)

havn't started working yet, so it may be a few weeks before i pick anything up (depending on the price ofcourse)