Jeep YJ Forum Second generation of the classic Jeep - manufactured from 1987 till 1995. Known by their square headlights.

4 or 6 banger?

Old Jan 12, 2010 | 05:46 PM
  #1  
purplehavoc's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2010
Posts: 5
From: Ontario
Default 4 or 6 banger?

Hey everyone.
New to the site but not really to older jeeps.
Sold my ****** CJ2A a few years back and am now looking at a yj.
I have done some reading on both motors,but would like some opinions.
I am looking at 87-89 yj's. Most have the carbed 6 cyl.
So my question comes down to are these carbed inline 6's that bad?
Should i just wait for a TBI 4 cyl?
Will pretty much just be a summer toy,parts store runner ect,till i have some cash to play with.
Thanks
John
Old Jan 12, 2010 | 06:17 PM
  #2  
swamper's Avatar
Senior Member
 
Joined: Sep 2009
Posts: 150
From: port colborne ontario
Default Re: 4 or 6 banger?

i had an 87 with the carbed 4.2 5 spd and 31 x 13.5 and i think that it sucked *****
Old Jan 12, 2010 | 08:32 PM
  #3  
purplehavoc's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2010
Posts: 5
From: Ontario
Default Re: 4 or 6 banger?

Besides sucking in the ball department,what are they like for reliability?
The 87 i am looking at has 160k on it.
Are they knowen for lots of problems or issues besides lack of power?
Old Jan 12, 2010 | 09:35 PM
  #4  
mattz's Avatar
Junior Member
 
Joined: Sep 2009
Posts: 23
From: Leduc AB
Default Re: 4 or 6 banger?

I think you are best to get a FI 4.0 litre they realy are the best motor.
Old Jan 23, 2010 | 07:07 PM
  #5  
bhrdy's Avatar
Junior Member
 
Joined: Jun 2009
Posts: 12
From: Saskatoon
Default Re: 4 or 6 banger?

i have a 1990 jeep yj and it had the 4.2 carbed other than the carb not wanting to work properly because of the computer controlled portion of it, i didnt have any issues with it. my brother has a inline 4 TBI and its causing him lots of problems. i agree with mattz i would also go with the 4.0 litre fuel injection.
Old Jan 23, 2010 | 10:19 PM
  #6  
scooby's Avatar
Senior Member
 
Joined: Oct 2008
Posts: 202
From: up to my ass in mud
Default Re: 4 or 6 banger?

i got a 90 YJ with a 2.5Land I beat the crap out of it i hit that thing off the rev limiter every time i go out ,but it is alot nice driving with the my 92YJ with the V8
Old Jan 24, 2010 | 09:12 PM
  #7  
bigdan's Avatar
Member
 
Joined: Jul 2008
Posts: 77
From: st-jean baptiste ,quebec
Default Re: 4 or 6 banger?

go for a 91+ YJ 4.0L + AX15 tranny cant beat that combo
Old Feb 2, 2010 | 02:36 PM
  #8  
Mr.Bryan's Avatar
Junior Member
 
Joined: Feb 2007
Posts: 3
Default Re: 4 or 6 banger?

I have a '91 with a 4.0 and I'm sure that's the way to go.
Every parts Jeep I ever bought had a 4.2 in it, either ran ruff or didn't run at all and few people ever came looking for engine parts. Take from that what it's worth.
Old Feb 4, 2010 | 10:27 PM
  #9  
86ramcharger's Avatar
Junior Member
 
Joined: Sep 2009
Posts: 1
From: Welland ON.
Default Re: 4 or 6 banger?

Check out the article on this in the last Peterson Offroad Mag. I read some of it, I believe they recommended 87-up only and the 4.0 engine. But this article was awsome it went through what transfer case, diffs. engine, trany etc. too look for.
Old Feb 7, 2010 | 07:19 AM
  #10  
scooby's Avatar
Senior Member
 
Joined: Oct 2008
Posts: 202
From: up to my ass in mud
Default Re: 4 or 6 banger?

come over to my place in the 4 banger then i'll take ya for a ride in the V8 YJ

Thread Tools
Search this Thread

All times are GMT -4. The time now is 05:02 AM.

Page generated in 0.06952 seconds with 7 queries