Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep YJ Forum (https://www.jeepscanada.com/jeep-yj-forum-21/)
-   -   3:07 (https://www.jeepscanada.com/jeep-yj-forum-21/3-07-a-112305/)

patyjlongmire Nov 10, 2009 08:28 PM

3:07
 
Got 3:07 with 33in thornbirds in yj with 5spd and a inline 6 (258). What would be better gears. Will be driven on road aswell.

Croweman Nov 10, 2009 10:14 PM

Re: 3:07
 
Hi there,

I've had 33's on both a YJ and a TJ and I found that 3:73 gears worked pretty well for both on and off road usage. Hope that helps a bit.

Mr White Nov 11, 2009 07:47 PM

Re: 3:07
 
If your going for better gearing try to locate at least a rear dana44 w/4.10 gears and you can regear the front or if your lucky pu a d44 for the front too (d44 are a stronger axle than the d30/35's). Finding a couple from a ruby would be nice, with lockers. I don't know how accessible they are in your area.The 4 cy's came with d30 and 35's with 4.10 gears thats another way to go if u can locate an old yj

LostSoul Nov 12, 2009 08:46 AM

Re: 3:07
 

Originally Posted by Mr White (Post 540310)
If your going for better gearing try to locate at least a rear dana44 w/4.10 gears and you can regear the front or if your lucky pu a d44 for the front too (d44 are a stronger axle than the d30/35's). Finding a couple from a ruby would be nice, with lockers. I don't know how accessible they are in your area.The 4 cy's came with d30 and 35's with 4.10 gears thats another way to go if u can locate an old yj


Agreed and not to be an A$$ all though I am, Google gear calculator and it will help you through some of your questions. A good one is www.4lo.com they have more options that will allow you to make an educated choice based on now and possible future tire growth. It would be smarter to say go with the 4.10's or larger now if you think you may go to say a 35 or larger tire in the future.

Better yet, do the ultimate mod to it and trade that thing for a Samurai =)

RiponredTJ Nov 12, 2009 08:22 PM

Re: 3:07
 

Originally Posted by LostSoul (Post 540370)
Agreed and not to be an A$$ all though I am, Google gear calculator and it will help you through some of your questions. A good one is www.4lo.com they have more options that will allow you to make an educated choice based on now and possible future tire growth. It would be smarter to say go with the 4.10's or larger now if you think you may go to say a 35 or larger tire in the future.

Better yet, do the ultimate mod to it and trade that thing for a Samurai =)

I love your Samurai!
I love my Jeep more, but I want a Samurai too.
For the small tracks.
Cheers!

LostSoul Nov 13, 2009 08:44 AM

Re: 3:07
 
Thanks man, I lover her to. The nice part is it is built to do the big stuff, but it is small enough to do the tight stuff as well. I Would love to make it rear steer as well for the even tighter stuff.

94dime Nov 13, 2009 04:51 PM

Re: 3:07
 
mine was a 2.5 but same power.
i had 4.10s
i ran 35s it lugged at hwy speeds but kepped the rpms down
i ran 30s and it done well over all but the rpms were screaming on the hwy

so 33s and 4.10s sounds liek a good combo. easier to find then 3.73 im sure unless your going new but its not worth it
get a cheap jeep with a 2.5 and swamp it over.

bigdan Nov 13, 2009 11:42 PM

Re: 3:07
 
like previous ly said, if on a tight budget go for 4 cyl YJ`s diffs ...they have 4:10 from factory direct fit ....if you have better budget get a dana 44 rear diff .....

HockeyDad Dec 15, 2009 03:29 PM

Re: 3:07
 
3:55 would put you back to stock. Personally I'd go 4:10 or higher.
http://www.manoian.net/jeep/gear_ratio_calculator.html

patyjlongmire Mar 19, 2010 09:21 PM

Re: 3:07
 
thanks found 4:10's in a xj with a big 2.8l wow


All times are GMT -4. The time now is 10:44 AM.


© 2026 MH Sub I, LLC dba Internet Brands

Page generated in 0.05543 seconds with 4 queries