1988Yj SOA 35's
 

I have a 88 yj with a AMC 360 SOA sitting on 35's. Ive been having a problem with keeping u-joints in the rear drive shaft. I replaced the inner end outer pinion bearings hopeing this would fix the problem. Took her for a test drive just a short one and she did good. Before i replaced the bearings i wouldnt even have to step on the gas and she would blow the u-joint out. Does anyone have any input??

Re: 1988Yj SOA 35's
 

My guess would be that the axle is twisting under the torque and changing the angle of the u/joint to the point that it is beyond its ability to turn without something breaking.

Re: 1988Yj SOA 35's
 

Hi Biff, say Hi to Hap and Willy... How are the mounts in your rig, as in the trans mounts etc. just grasping at straws. The angle is fine?

Cheers, don't whistle in the elevator.