I just purchased a RE 7000-3 lift kit and it did not come with a drop pittman arm. Do I need one, or do I just reuse the stock one?

 

just use your stock one, i was wondering the same thing because my 3" kit didnt come with one, but you dont need it. it might be worse if you do put it on. Everyone i know with 6+ inches are running a stock one as well. so i say no.

 

It really depends on the angle between your drang link and track bar. You want them as close to parallel as possible

 

I put on a 4" Superlift kit on my 03 tj a few years ago and it came COMPLETE with a drop pitman arm, motor mounts (which I didn't change). But then as others have said u may get away without changing it. There is also allot say you need a SYE. Mine came out with such a slite angle it isn't necessary. I'd say anything higher than a 4" then you'd need one. That's why I always suggest when buying a lift kit - shop around and buy one complete, so you don't end up going out and spending more money for parts are normally in a GOOD kit.

 

Thanks for the info