Jeep TJ Forum Third generation of the classic Jeep - manufactured since 1997. Known by the coil springs and round headlights. Includes the Rubicon and Unlimited editions as well

Questions, rants and opinions....

Thread Tools
 
Search this Thread
 
Old 01-19-2011, 12:06 PM
  #1  
Junior Member
Thread Starter
 
melvin's Avatar
 
Join Date: Aug 2010
Location: Quebec, Quebec
Posts: 2
Canada Questions, rants and opinions....

Hey all. Number the first, let me start by saying it's been awhile since I been here. My 00 TJ was offline for a long while and now that I got er back going, here I be. Just bought a 01 TJ also.

So here's my question: I bought an 8 Ball to use as a shifter ****. I need to put a thread insert in it and need to know the dimesnions of the shifter as well as the thread pitch. I was attempting to find out but have come to the conclusion that benchfitting is not my forte. I'll stick to fixing guns. So if anybody can help, awesome.

My rant will be short. If there is one thing I've learned coming to QC from AB, it's that this province hates you if you have a jacked up vehicle, are from out of province or don't conform to their view that everybody should be driving some hunk of scrap "street racer". I grew up here and never realized in my youth that it was that bad.

Lastly, the "Jeep Wave". As has been my experience in the 7 years I have owbed a Jeep is that Wranglers (CJ, YJ, TJ) wave to each other. Cherokee-style do the same amongst themselves and Liberty's are driven by old men so who cares? (Kidding) Anyhow, the issue that I'm curious about is your opinions on the new generation Jeeps (2007+) that all look like Cherokees to me. They wave to me and usually I return the courtesy but given that we have our "cliques", if you will, shouldn't they wave to others with the same body style like the rest of us? Maybe I'm wrong or being an elitist jerk but that's what I think. Of course, owning and driving TJ does put us in the "elite". XD

P.S. and by extension: *****'s, CJ's and YJ's. :D
melvin is offline  
Old 01-20-2011, 07:34 AM
  #2  
Senior Member
 
oldfart's Avatar
 
Join Date: May 2010
Location: quebec
Posts: 640
Default Re: Questions, rants and opinions....

Take off the gear **** and go to your local friendly hardware store and try a bolt in it, I believe it's 3/8 18.

you're expecting courtesy in Quebec, dream on.
oldfart is offline  
Old 01-22-2011, 09:45 PM
  #3  
Member
 
Prd_Cdn's Avatar
 
Join Date: May 2009
Location: Alb.
Posts: 82
Default Re: Questions, rants and opinions....

I have yet to be waved by a JK.

Sometimes I miss a TJ as they are driving past. Irregardless I try my best to wave at everyone. Of them all in the 9 yrs I've own my jeep I think i've gotten 20 or so.

So... all those driving street racers ~ I laugh at them as I go past while their stuck in the snow bank or anything more than 2 inches (48mm).

Your 8 Ball.. I understand all most every TJ is different, I've read some are metric 15mm others are 5/16. Sorry ... good luck
Prd_Cdn is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shazzamy
Jeep Grand Cherokee Forum
3
11-16-2010 10:20 PM
Brake Down
Jeep Mailing List
3
11-04-2007 04:53 AM
Les
Jeep Mailing List
39
10-22-2006 05:48 PM
Timothy Chilson
Jeep Mailing List
24
01-11-2004 10:36 AM
Foot Loose
Jeep Mailing List
4
09-10-2003 10:12 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Questions, rants and opinions....



All times are GMT -4. The time now is 04:32 AM.

Page generated in 0.10303 seconds with 12 queries