2001 TJ - DRL not working
#1
2001 TJ - DRL not working
Drl's not working and fog lights not working, indicator on dash stays on all the time. Installed new relay and fuse with no success. They should turn on with the key right? I am thinking it is the multi-function switch or module, not sure where module is to check if there is a way to check? Any thoughts?
#2
Re: 2001 TJ - DRL not working
Ck back to this thread it gives u all the details on what it cud be and how to fix it yourself
"Fog Lamps not Working" 20.9.2011 Canadian Bacon ask pretty much the same question read though
In case you cannot locate the thread here is my reply to CB
One thing u can do if your in doubt of my instructions is go to ur dealer and ask him for a schematic of the wiring for the mult task switch (I got mine FREE) or you can first remove the NEG battery cable hang it up somewhere so it doesn't touch anything metal, wait 30 mins (as above) remove the 4 screws around the column nears the dash (its a covering) the switch is on ur left closest to the door. You will see a orange and white wire, snip this one only... your going to put a new switch on/off mounted somewhere convenient to your dash (I put mine on the left side in the lower part as it was easy to install and replace if i broke it later) the wire isn't going to be long enuff so ur going to have to tap a wire to it.. soldiering is the best and cover it with either electrical tape or the rubber meltie thingie (looks like a rubber tube-u heat and it melts on the wire) so the switch can go inbetween the wires. So now when u want power for ur fogs u will have to turn this switch on first.. everything else will come on as b/4.. I suggest u mount the switch with the off UP and the on DOWN - so if ur knee hits the switch ur fogs won't come on accidentally...and preferably as switch with a metal toggle, plastic breaks easy if the knee hits it..
Lets know if this corrects the problem
"Fog Lamps not Working" 20.9.2011 Canadian Bacon ask pretty much the same question read though
In case you cannot locate the thread here is my reply to CB
One thing u can do if your in doubt of my instructions is go to ur dealer and ask him for a schematic of the wiring for the mult task switch (I got mine FREE) or you can first remove the NEG battery cable hang it up somewhere so it doesn't touch anything metal, wait 30 mins (as above) remove the 4 screws around the column nears the dash (its a covering) the switch is on ur left closest to the door. You will see a orange and white wire, snip this one only... your going to put a new switch on/off mounted somewhere convenient to your dash (I put mine on the left side in the lower part as it was easy to install and replace if i broke it later) the wire isn't going to be long enuff so ur going to have to tap a wire to it.. soldiering is the best and cover it with either electrical tape or the rubber meltie thingie (looks like a rubber tube-u heat and it melts on the wire) so the switch can go inbetween the wires. So now when u want power for ur fogs u will have to turn this switch on first.. everything else will come on as b/4.. I suggest u mount the switch with the off UP and the on DOWN - so if ur knee hits the switch ur fogs won't come on accidentally...and preferably as switch with a metal toggle, plastic breaks easy if the knee hits it..
Lets know if this corrects the problem
Last edited by Mr White; 12-22-2011 at 10:40 PM. Reason: added info
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)