YJ dash problem
#11
Guest
Posts: n/a
Re: YJ dash problem
BFH?
On 20 Dec 2006 19:55:30 -0800, "adam" <captaindentist@gmail.com>
wrote:
>If I was planning on taking the top part of the dash..this would make
>sense, but I only need to remove the glove box., which is well below.
>In the manual they have only listed 3 screws, so maybe there are
>"pins"...I guess I should just pull harder and see. I was trying to
>take it slow...but when that fails...brute force.
>
>
>
>On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
>wrote:
>> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
>> God Bless America, Bill O|||||||O
>> mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> adam wrote:
>>
>> > Ohh...for those curious...here is a photo of a YJ dash...I am having
>> > problems with the glovebox-grab bar peice..
>>
>> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>>
>> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
>> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
>> > > driver side and middle out easily, but the passenger side only has 3
>> > > screws on the top. After removing these it still seems "bolted" on. So
>> > > removed the glovebox door...still no-go. The repair manual only shows
>> > > the top 3 screws.
>>
>> > > Am I "screwed" or has anyone sucessfully done this without descructive
>> > > dissemably?
>>
>> > > Thanks,
>>
>> > > Adam
On 20 Dec 2006 19:55:30 -0800, "adam" <captaindentist@gmail.com>
wrote:
>If I was planning on taking the top part of the dash..this would make
>sense, but I only need to remove the glove box., which is well below.
>In the manual they have only listed 3 screws, so maybe there are
>"pins"...I guess I should just pull harder and see. I was trying to
>take it slow...but when that fails...brute force.
>
>
>
>On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
>wrote:
>> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
>> God Bless America, Bill O|||||||O
>> mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> adam wrote:
>>
>> > Ohh...for those curious...here is a photo of a YJ dash...I am having
>> > problems with the glovebox-grab bar peice..
>>
>> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>>
>> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
>> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
>> > > driver side and middle out easily, but the passenger side only has 3
>> > > screws on the top. After removing these it still seems "bolted" on. So
>> > > removed the glovebox door...still no-go. The repair manual only shows
>> > > the top 3 screws.
>>
>> > > Am I "screwed" or has anyone sucessfully done this without descructive
>> > > dissemably?
>>
>> > > Thanks,
>>
>> > > Adam
#12
Guest
Posts: n/a
Re: YJ dash problem
BFH?
On 20 Dec 2006 19:55:30 -0800, "adam" <captaindentist@gmail.com>
wrote:
>If I was planning on taking the top part of the dash..this would make
>sense, but I only need to remove the glove box., which is well below.
>In the manual they have only listed 3 screws, so maybe there are
>"pins"...I guess I should just pull harder and see. I was trying to
>take it slow...but when that fails...brute force.
>
>
>
>On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
>wrote:
>> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
>> God Bless America, Bill O|||||||O
>> mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> adam wrote:
>>
>> > Ohh...for those curious...here is a photo of a YJ dash...I am having
>> > problems with the glovebox-grab bar peice..
>>
>> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>>
>> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
>> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
>> > > driver side and middle out easily, but the passenger side only has 3
>> > > screws on the top. After removing these it still seems "bolted" on. So
>> > > removed the glovebox door...still no-go. The repair manual only shows
>> > > the top 3 screws.
>>
>> > > Am I "screwed" or has anyone sucessfully done this without descructive
>> > > dissemably?
>>
>> > > Thanks,
>>
>> > > Adam
On 20 Dec 2006 19:55:30 -0800, "adam" <captaindentist@gmail.com>
wrote:
>If I was planning on taking the top part of the dash..this would make
>sense, but I only need to remove the glove box., which is well below.
>In the manual they have only listed 3 screws, so maybe there are
>"pins"...I guess I should just pull harder and see. I was trying to
>take it slow...but when that fails...brute force.
>
>
>
>On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
>wrote:
>> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
>> God Bless America, Bill O|||||||O
>> mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> adam wrote:
>>
>> > Ohh...for those curious...here is a photo of a YJ dash...I am having
>> > problems with the glovebox-grab bar peice..
>>
>> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>>
>> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
>> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
>> > > driver side and middle out easily, but the passenger side only has 3
>> > > screws on the top. After removing these it still seems "bolted" on. So
>> > > removed the glovebox door...still no-go. The repair manual only shows
>> > > the top 3 screws.
>>
>> > > Am I "screwed" or has anyone sucessfully done this without descructive
>> > > dissemably?
>>
>> > > Thanks,
>>
>> > > Adam
#13
Guest
Posts: n/a
Re: YJ dash problem
BFH?
On 20 Dec 2006 19:55:30 -0800, "adam" <captaindentist@gmail.com>
wrote:
>If I was planning on taking the top part of the dash..this would make
>sense, but I only need to remove the glove box., which is well below.
>In the manual they have only listed 3 screws, so maybe there are
>"pins"...I guess I should just pull harder and see. I was trying to
>take it slow...but when that fails...brute force.
>
>
>
>On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
>wrote:
>> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
>> God Bless America, Bill O|||||||O
>> mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> adam wrote:
>>
>> > Ohh...for those curious...here is a photo of a YJ dash...I am having
>> > problems with the glovebox-grab bar peice..
>>
>> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>>
>> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
>> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
>> > > driver side and middle out easily, but the passenger side only has 3
>> > > screws on the top. After removing these it still seems "bolted" on. So
>> > > removed the glovebox door...still no-go. The repair manual only shows
>> > > the top 3 screws.
>>
>> > > Am I "screwed" or has anyone sucessfully done this without descructive
>> > > dissemably?
>>
>> > > Thanks,
>>
>> > > Adam
On 20 Dec 2006 19:55:30 -0800, "adam" <captaindentist@gmail.com>
wrote:
>If I was planning on taking the top part of the dash..this would make
>sense, but I only need to remove the glove box., which is well below.
>In the manual they have only listed 3 screws, so maybe there are
>"pins"...I guess I should just pull harder and see. I was trying to
>take it slow...but when that fails...brute force.
>
>
>
>On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
>wrote:
>> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
>> God Bless America, Bill O|||||||O
>> mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> adam wrote:
>>
>> > Ohh...for those curious...here is a photo of a YJ dash...I am having
>> > problems with the glovebox-grab bar peice..
>>
>> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>>
>> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
>> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
>> > > driver side and middle out easily, but the passenger side only has 3
>> > > screws on the top. After removing these it still seems "bolted" on. So
>> > > removed the glovebox door...still no-go. The repair manual only shows
>> > > the top 3 screws.
>>
>> > > Am I "screwed" or has anyone sucessfully done this without descructive
>> > > dissemably?
>>
>> > > Thanks,
>>
>> > > Adam
#14
Guest
Posts: n/a
Re: YJ dash problem
Funny...I did crack a small peice...so I stopped there and thought I
should do some more homework. FOUND IT!!!
http://www.tuffyproducts.com/instruc...df/036inst.pdf
Thanks for the tuffy people I now know there are four nuts, bolting it
onto the dash frame....
Ok, this is one of the most difficult jeep repairs I have ever
done...sure I didn't get greasy, but I woudl much rather change my
T-case oil or ..
thanks,
adam
On Dec 20, 11:37 pm, djdave <non...@fake.com> wrote:
> BFH?
>
> On 20 Dec 2006 19:55:30 -0800, "adam" <captaindent...@gmail.com>
> wrote:
>
> >If I was planning on taking the top part of the dash..this would make
> >sense, but I only need to remove the glove box., which is well below.
> >In the manual they have only listed 3 screws, so maybe there are
> >"pins"...I guess I should just pull harder and see. I was trying to
> >take it slow...but when that fails...brute force.
>
> >On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
> >wrote:
> >> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
> >> God Bless America, Bill O|||||||O
> >> mailto:LW------...@aol.comhttp://www.----------.com/
>
> >> adam wrote:
>
> >> > Ohh...for those curious...here is a photo of a YJ dash...I am having
> >> > problems with the glovebox-grab bar peice..
>
> >> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>
> >> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> >> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
> >> > > driver side and middle out easily, but the passenger side only has 3
> >> > > screws on the top. After removing these it still seems "bolted" on. So
> >> > > removed the glovebox door...still no-go. The repair manual only shows
> >> > > the top 3 screws.
>
> >> > > Am I "screwed" or has anyone sucessfully done this without descructive
> >> > > dissemably?
>
> >> > > Thanks,
>
> >> > > Adam
should do some more homework. FOUND IT!!!
http://www.tuffyproducts.com/instruc...df/036inst.pdf
Thanks for the tuffy people I now know there are four nuts, bolting it
onto the dash frame....
Ok, this is one of the most difficult jeep repairs I have ever
done...sure I didn't get greasy, but I woudl much rather change my
T-case oil or ..
thanks,
adam
On Dec 20, 11:37 pm, djdave <non...@fake.com> wrote:
> BFH?
>
> On 20 Dec 2006 19:55:30 -0800, "adam" <captaindent...@gmail.com>
> wrote:
>
> >If I was planning on taking the top part of the dash..this would make
> >sense, but I only need to remove the glove box., which is well below.
> >In the manual they have only listed 3 screws, so maybe there are
> >"pins"...I guess I should just pull harder and see. I was trying to
> >take it slow...but when that fails...brute force.
>
> >On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
> >wrote:
> >> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
> >> God Bless America, Bill O|||||||O
> >> mailto:LW------...@aol.comhttp://www.----------.com/
>
> >> adam wrote:
>
> >> > Ohh...for those curious...here is a photo of a YJ dash...I am having
> >> > problems with the glovebox-grab bar peice..
>
> >> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>
> >> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> >> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
> >> > > driver side and middle out easily, but the passenger side only has 3
> >> > > screws on the top. After removing these it still seems "bolted" on. So
> >> > > removed the glovebox door...still no-go. The repair manual only shows
> >> > > the top 3 screws.
>
> >> > > Am I "screwed" or has anyone sucessfully done this without descructive
> >> > > dissemably?
>
> >> > > Thanks,
>
> >> > > Adam
#15
Guest
Posts: n/a
Re: YJ dash problem
Funny...I did crack a small peice...so I stopped there and thought I
should do some more homework. FOUND IT!!!
http://www.tuffyproducts.com/instruc...df/036inst.pdf
Thanks for the tuffy people I now know there are four nuts, bolting it
onto the dash frame....
Ok, this is one of the most difficult jeep repairs I have ever
done...sure I didn't get greasy, but I woudl much rather change my
T-case oil or ..
thanks,
adam
On Dec 20, 11:37 pm, djdave <non...@fake.com> wrote:
> BFH?
>
> On 20 Dec 2006 19:55:30 -0800, "adam" <captaindent...@gmail.com>
> wrote:
>
> >If I was planning on taking the top part of the dash..this would make
> >sense, but I only need to remove the glove box., which is well below.
> >In the manual they have only listed 3 screws, so maybe there are
> >"pins"...I guess I should just pull harder and see. I was trying to
> >take it slow...but when that fails...brute force.
>
> >On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
> >wrote:
> >> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
> >> God Bless America, Bill O|||||||O
> >> mailto:LW------...@aol.comhttp://www.----------.com/
>
> >> adam wrote:
>
> >> > Ohh...for those curious...here is a photo of a YJ dash...I am having
> >> > problems with the glovebox-grab bar peice..
>
> >> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>
> >> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> >> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
> >> > > driver side and middle out easily, but the passenger side only has 3
> >> > > screws on the top. After removing these it still seems "bolted" on. So
> >> > > removed the glovebox door...still no-go. The repair manual only shows
> >> > > the top 3 screws.
>
> >> > > Am I "screwed" or has anyone sucessfully done this without descructive
> >> > > dissemably?
>
> >> > > Thanks,
>
> >> > > Adam
should do some more homework. FOUND IT!!!
http://www.tuffyproducts.com/instruc...df/036inst.pdf
Thanks for the tuffy people I now know there are four nuts, bolting it
onto the dash frame....
Ok, this is one of the most difficult jeep repairs I have ever
done...sure I didn't get greasy, but I woudl much rather change my
T-case oil or ..
thanks,
adam
On Dec 20, 11:37 pm, djdave <non...@fake.com> wrote:
> BFH?
>
> On 20 Dec 2006 19:55:30 -0800, "adam" <captaindent...@gmail.com>
> wrote:
>
> >If I was planning on taking the top part of the dash..this would make
> >sense, but I only need to remove the glove box., which is well below.
> >In the manual they have only listed 3 screws, so maybe there are
> >"pins"...I guess I should just pull harder and see. I was trying to
> >take it slow...but when that fails...brute force.
>
> >On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
> >wrote:
> >> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
> >> God Bless America, Bill O|||||||O
> >> mailto:LW------...@aol.comhttp://www.----------.com/
>
> >> adam wrote:
>
> >> > Ohh...for those curious...here is a photo of a YJ dash...I am having
> >> > problems with the glovebox-grab bar peice..
>
> >> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>
> >> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> >> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
> >> > > driver side and middle out easily, but the passenger side only has 3
> >> > > screws on the top. After removing these it still seems "bolted" on. So
> >> > > removed the glovebox door...still no-go. The repair manual only shows
> >> > > the top 3 screws.
>
> >> > > Am I "screwed" or has anyone sucessfully done this without descructive
> >> > > dissemably?
>
> >> > > Thanks,
>
> >> > > Adam
#16
Guest
Posts: n/a
Re: YJ dash problem
Funny...I did crack a small peice...so I stopped there and thought I
should do some more homework. FOUND IT!!!
http://www.tuffyproducts.com/instruc...df/036inst.pdf
Thanks for the tuffy people I now know there are four nuts, bolting it
onto the dash frame....
Ok, this is one of the most difficult jeep repairs I have ever
done...sure I didn't get greasy, but I woudl much rather change my
T-case oil or ..
thanks,
adam
On Dec 20, 11:37 pm, djdave <non...@fake.com> wrote:
> BFH?
>
> On 20 Dec 2006 19:55:30 -0800, "adam" <captaindent...@gmail.com>
> wrote:
>
> >If I was planning on taking the top part of the dash..this would make
> >sense, but I only need to remove the glove box., which is well below.
> >In the manual they have only listed 3 screws, so maybe there are
> >"pins"...I guess I should just pull harder and see. I was trying to
> >take it slow...but when that fails...brute force.
>
> >On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
> >wrote:
> >> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
> >> God Bless America, Bill O|||||||O
> >> mailto:LW------...@aol.comhttp://www.----------.com/
>
> >> adam wrote:
>
> >> > Ohh...for those curious...here is a photo of a YJ dash...I am having
> >> > problems with the glovebox-grab bar peice..
>
> >> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>
> >> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> >> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
> >> > > driver side and middle out easily, but the passenger side only has 3
> >> > > screws on the top. After removing these it still seems "bolted" on. So
> >> > > removed the glovebox door...still no-go. The repair manual only shows
> >> > > the top 3 screws.
>
> >> > > Am I "screwed" or has anyone sucessfully done this without descructive
> >> > > dissemably?
>
> >> > > Thanks,
>
> >> > > Adam
should do some more homework. FOUND IT!!!
http://www.tuffyproducts.com/instruc...df/036inst.pdf
Thanks for the tuffy people I now know there are four nuts, bolting it
onto the dash frame....
Ok, this is one of the most difficult jeep repairs I have ever
done...sure I didn't get greasy, but I woudl much rather change my
T-case oil or ..
thanks,
adam
On Dec 20, 11:37 pm, djdave <non...@fake.com> wrote:
> BFH?
>
> On 20 Dec 2006 19:55:30 -0800, "adam" <captaindent...@gmail.com>
> wrote:
>
> >If I was planning on taking the top part of the dash..this would make
> >sense, but I only need to remove the glove box., which is well below.
> >In the manual they have only listed 3 screws, so maybe there are
> >"pins"...I guess I should just pull harder and see. I was trying to
> >take it slow...but when that fails...brute force.
>
> >On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
> >wrote:
> >> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
> >> God Bless America, Bill O|||||||O
> >> mailto:LW------...@aol.comhttp://www.----------.com/
>
> >> adam wrote:
>
> >> > Ohh...for those curious...here is a photo of a YJ dash...I am having
> >> > problems with the glovebox-grab bar peice..
>
> >> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>
> >> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> >> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
> >> > > driver side and middle out easily, but the passenger side only has 3
> >> > > screws on the top. After removing these it still seems "bolted" on. So
> >> > > removed the glovebox door...still no-go. The repair manual only shows
> >> > > the top 3 screws.
>
> >> > > Am I "screwed" or has anyone sucessfully done this without descructive
> >> > > dissemably?
>
> >> > > Thanks,
>
> >> > > Adam
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)