YJ dash problem
12-20-2006, 09:35 PM
#1
Guest
Posts: n/a
YJ dash problem
I am trying to remove the dash bezels from my 88 YJ. I can get the
driver side and middle out easily, but the passenger side only has 3
screws on the top. After removing these it still seems "bolted" on. So
removed the glovebox door...still no-go. The repair manual only shows
the top 3 screws.
Am I "screwed" or has anyone sucessfully done this without descructive
dissemably?
Thanks,
Adam
driver side and middle out easily, but the passenger side only has 3
screws on the top. After removing these it still seems "bolted" on. So
removed the glovebox door...still no-go. The repair manual only shows
the top 3 screws.
Am I "screwed" or has anyone sucessfully done this without descructive
dissemably?
Thanks,
Adam
12-20-2006, 09:39 PM
#2
Guest
Posts: n/a
Re: YJ dash problem
Ohh...for those curious...here is a photo of a YJ dash...I am having
problems with the glovebox-grab bar peice..
http://jeep.off-road.com/jeep/data/a...1302/dash1.jpg
On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> I am trying to remove the dash bezels from my 88 YJ. I can get the
> driver side and middle out easily, but the passenger side only has 3
> screws on the top. After removing these it still seems "bolted" on. So
> removed the glovebox door...still no-go. The repair manual only shows
> the top 3 screws.
>
> Am I "screwed" or has anyone sucessfully done this without descructive
> dissemably?
>
> Thanks,
>
> Adam
problems with the glovebox-grab bar peice..
http://jeep.off-road.com/jeep/data/a...1302/dash1.jpg
On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> I am trying to remove the dash bezels from my 88 YJ. I can get the
> driver side and middle out easily, but the passenger side only has 3
> screws on the top. After removing these it still seems "bolted" on. So
> removed the glovebox door...still no-go. The repair manual only shows
> the top 3 screws.
>
> Am I "screwed" or has anyone sucessfully done this without descructive
> dissemably?
>
> Thanks,
>
> Adam
12-20-2006, 09:39 PM
#3
Guest
Posts: n/a
Re: YJ dash problem
Ohh...for those curious...here is a photo of a YJ dash...I am having
problems with the glovebox-grab bar peice..
http://jeep.off-road.com/jeep/data/a...1302/dash1.jpg
On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> I am trying to remove the dash bezels from my 88 YJ. I can get the
> driver side and middle out easily, but the passenger side only has 3
> screws on the top. After removing these it still seems "bolted" on. So
> removed the glovebox door...still no-go. The repair manual only shows
> the top 3 screws.
>
> Am I "screwed" or has anyone sucessfully done this without descructive
> dissemably?
>
> Thanks,
>
> Adam
problems with the glovebox-grab bar peice..
http://jeep.off-road.com/jeep/data/a...1302/dash1.jpg
On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> I am trying to remove the dash bezels from my 88 YJ. I can get the
> driver side and middle out easily, but the passenger side only has 3
> screws on the top. After removing these it still seems "bolted" on. So
> removed the glovebox door...still no-go. The repair manual only shows
> the top 3 screws.
>
> Am I "screwed" or has anyone sucessfully done this without descructive
> dissemably?
>
> Thanks,
>
> Adam
12-20-2006, 09:39 PM
#4
Guest
Posts: n/a
Re: YJ dash problem
Ohh...for those curious...here is a photo of a YJ dash...I am having
problems with the glovebox-grab bar peice..
http://jeep.off-road.com/jeep/data/a...1302/dash1.jpg
On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> I am trying to remove the dash bezels from my 88 YJ. I can get the
> driver side and middle out easily, but the passenger side only has 3
> screws on the top. After removing these it still seems "bolted" on. So
> removed the glovebox door...still no-go. The repair manual only shows
> the top 3 screws.
>
> Am I "screwed" or has anyone sucessfully done this without descructive
> dissemably?
>
> Thanks,
>
> Adam
problems with the glovebox-grab bar peice..
http://jeep.off-road.com/jeep/data/a...1302/dash1.jpg
On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> I am trying to remove the dash bezels from my 88 YJ. I can get the
> driver side and middle out easily, but the passenger side only has 3
> screws on the top. After removing these it still seems "bolted" on. So
> removed the glovebox door...still no-go. The repair manual only shows
> the top 3 screws.
>
> Am I "screwed" or has anyone sucessfully done this without descructive
> dissemably?
>
> Thanks,
>
> Adam
12-20-2006, 10:01 PM
#5
Guest
Posts: n/a
Re: YJ dash problem
Have you tilled the windshield forward:
http://jeep.off-road.com/jeep/articl....jsp?id=261302
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
adam wrote:
>
> Ohh...for those curious...here is a photo of a YJ dash...I am having
> problems with the glovebox-grab bar peice..
>
> http://jeep.off-road.com/jeep/data/a...1302/dash1.jpg
>
> On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> > I am trying to remove the dash bezels from my 88 YJ. I can get the
> > driver side and middle out easily, but the passenger side only has 3
> > screws on the top. After removing these it still seems "bolted" on. So
> > removed the glovebox door...still no-go. The repair manual only shows
> > the top 3 screws.
> >
> > Am I "screwed" or has anyone sucessfully done this without descructive
> > dissemably?
> >
> > Thanks,
> >
> > Adam
http://jeep.off-road.com/jeep/articl....jsp?id=261302
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
adam wrote:
>
> Ohh...for those curious...here is a photo of a YJ dash...I am having
> problems with the glovebox-grab bar peice..
>
> http://jeep.off-road.com/jeep/data/a...1302/dash1.jpg
>
> On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> > I am trying to remove the dash bezels from my 88 YJ. I can get the
> > driver side and middle out easily, but the passenger side only has 3
> > screws on the top. After removing these it still seems "bolted" on. So
> > removed the glovebox door...still no-go. The repair manual only shows
> > the top 3 screws.
> >
> > Am I "screwed" or has anyone sucessfully done this without descructive
> > dissemably?
> >
> > Thanks,
> >
> > Adam
12-20-2006, 10:01 PM
#6
Guest
Posts: n/a
Re: YJ dash problem
Have you tilled the windshield forward:
http://jeep.off-road.com/jeep/articl....jsp?id=261302
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
adam wrote:
>
> Ohh...for those curious...here is a photo of a YJ dash...I am having
> problems with the glovebox-grab bar peice..
>
> http://jeep.off-road.com/jeep/data/a...1302/dash1.jpg
>
> On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> > I am trying to remove the dash bezels from my 88 YJ. I can get the
> > driver side and middle out easily, but the passenger side only has 3
> > screws on the top. After removing these it still seems "bolted" on. So
> > removed the glovebox door...still no-go. The repair manual only shows
> > the top 3 screws.
> >
> > Am I "screwed" or has anyone sucessfully done this without descructive
> > dissemably?
> >
> > Thanks,
> >
> > Adam
http://jeep.off-road.com/jeep/articl....jsp?id=261302
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
adam wrote:
>
> Ohh...for those curious...here is a photo of a YJ dash...I am having
> problems with the glovebox-grab bar peice..
>
> http://jeep.off-road.com/jeep/data/a...1302/dash1.jpg
>
> On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> > I am trying to remove the dash bezels from my 88 YJ. I can get the
> > driver side and middle out easily, but the passenger side only has 3
> > screws on the top. After removing these it still seems "bolted" on. So
> > removed the glovebox door...still no-go. The repair manual only shows
> > the top 3 screws.
> >
> > Am I "screwed" or has anyone sucessfully done this without descructive
> > dissemably?
> >
> > Thanks,
> >
> > Adam
12-20-2006, 10:01 PM
#7
Guest
Posts: n/a
Re: YJ dash problem
Have you tilled the windshield forward:
http://jeep.off-road.com/jeep/articl....jsp?id=261302
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
adam wrote:
>
> Ohh...for those curious...here is a photo of a YJ dash...I am having
> problems with the glovebox-grab bar peice..
>
> http://jeep.off-road.com/jeep/data/a...1302/dash1.jpg
>
> On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> > I am trying to remove the dash bezels from my 88 YJ. I can get the
> > driver side and middle out easily, but the passenger side only has 3
> > screws on the top. After removing these it still seems "bolted" on. So
> > removed the glovebox door...still no-go. The repair manual only shows
> > the top 3 screws.
> >
> > Am I "screwed" or has anyone sucessfully done this without descructive
> > dissemably?
> >
> > Thanks,
> >
> > Adam
http://jeep.off-road.com/jeep/articl....jsp?id=261302
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
adam wrote:
>
> Ohh...for those curious...here is a photo of a YJ dash...I am having
> problems with the glovebox-grab bar peice..
>
> http://jeep.off-road.com/jeep/data/a...1302/dash1.jpg
>
> On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> > I am trying to remove the dash bezels from my 88 YJ. I can get the
> > driver side and middle out easily, but the passenger side only has 3
> > screws on the top. After removing these it still seems "bolted" on. So
> > removed the glovebox door...still no-go. The repair manual only shows
> > the top 3 screws.
> >
> > Am I "screwed" or has anyone sucessfully done this without descructive
> > dissemably?
> >
> > Thanks,
> >
> > Adam
12-20-2006, 10:55 PM
#8
Guest
Posts: n/a
Re: YJ dash problem
If I was planning on taking the top part of the dash..this would make
sense, but I only need to remove the glove box., which is well below.
In the manual they have only listed 3 screws, so maybe there are
"pins"...I guess I should just pull harder and see. I was trying to
take it slow...but when that fails...brute force.
On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
wrote:
> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> adam wrote:
>
> > Ohh...for those curious...here is a photo of a YJ dash...I am having
> > problems with the glovebox-grab bar peice..
>
> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>
> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
> > > driver side and middle out easily, but the passenger side only has 3
> > > screws on the top. After removing these it still seems "bolted" on. So
> > > removed the glovebox door...still no-go. The repair manual only shows
> > > the top 3 screws.
>
> > > Am I "screwed" or has anyone sucessfully done this without descructive
> > > dissemably?
>
> > > Thanks,
>
> > > Adam
sense, but I only need to remove the glove box., which is well below.
In the manual they have only listed 3 screws, so maybe there are
"pins"...I guess I should just pull harder and see. I was trying to
take it slow...but when that fails...brute force.
On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
wrote:
> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> adam wrote:
>
> > Ohh...for those curious...here is a photo of a YJ dash...I am having
> > problems with the glovebox-grab bar peice..
>
> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>
> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
> > > driver side and middle out easily, but the passenger side only has 3
> > > screws on the top. After removing these it still seems "bolted" on. So
> > > removed the glovebox door...still no-go. The repair manual only shows
> > > the top 3 screws.
>
> > > Am I "screwed" or has anyone sucessfully done this without descructive
> > > dissemably?
>
> > > Thanks,
>
> > > Adam
12-20-2006, 10:55 PM
#9
Guest
Posts: n/a
Re: YJ dash problem
If I was planning on taking the top part of the dash..this would make
sense, but I only need to remove the glove box., which is well below.
In the manual they have only listed 3 screws, so maybe there are
"pins"...I guess I should just pull harder and see. I was trying to
take it slow...but when that fails...brute force.
On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
wrote:
> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> adam wrote:
>
> > Ohh...for those curious...here is a photo of a YJ dash...I am having
> > problems with the glovebox-grab bar peice..
>
> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>
> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
> > > driver side and middle out easily, but the passenger side only has 3
> > > screws on the top. After removing these it still seems "bolted" on. So
> > > removed the glovebox door...still no-go. The repair manual only shows
> > > the top 3 screws.
>
> > > Am I "screwed" or has anyone sucessfully done this without descructive
> > > dissemably?
>
> > > Thanks,
>
> > > Adam
sense, but I only need to remove the glove box., which is well below.
In the manual they have only listed 3 screws, so maybe there are
"pins"...I guess I should just pull harder and see. I was trying to
take it slow...but when that fails...brute force.
On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
wrote:
> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> adam wrote:
>
> > Ohh...for those curious...here is a photo of a YJ dash...I am having
> > problems with the glovebox-grab bar peice..
>
> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>
> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
> > > driver side and middle out easily, but the passenger side only has 3
> > > screws on the top. After removing these it still seems "bolted" on. So
> > > removed the glovebox door...still no-go. The repair manual only shows
> > > the top 3 screws.
>
> > > Am I "screwed" or has anyone sucessfully done this without descructive
> > > dissemably?
>
> > > Thanks,
>
> > > Adam
12-20-2006, 10:55 PM
#10
Guest
Posts: n/a
Re: YJ dash problem
If I was planning on taking the top part of the dash..this would make
sense, but I only need to remove the glove box., which is well below.
In the manual they have only listed 3 screws, so maybe there are
"pins"...I guess I should just pull harder and see. I was trying to
take it slow...but when that fails...brute force.
On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
wrote:
> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> adam wrote:
>
> > Ohh...for those curious...here is a photo of a YJ dash...I am having
> > problems with the glovebox-grab bar peice..
>
> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>
> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
> > > driver side and middle out easily, but the passenger side only has 3
> > > screws on the top. After removing these it still seems "bolted" on. So
> > > removed the glovebox door...still no-go. The repair manual only shows
> > > the top 3 screws.
>
> > > Am I "screwed" or has anyone sucessfully done this without descructive
> > > dissemably?
>
> > > Thanks,
>
> > > Adam
sense, but I only need to remove the glove box., which is well below.
In the manual they have only listed 3 screws, so maybe there are
"pins"...I guess I should just pull harder and see. I was trying to
take it slow...but when that fails...brute force.
On Dec 20, 10:01 pm, "L.W.(Bill) ------ III" <billhug...@***.net>
wrote:
> Have you tilled the windshield forward:http://jeep.off-road.com/jeep/articl....jsp?id=261302
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> adam wrote:
>
> > Ohh...for those curious...here is a photo of a YJ dash...I am having
> > problems with the glovebox-grab bar peice..
>
> >http://jeep.off-road.com/jeep/data/a.../512005/261302...
>
> > On Dec 20, 9:35 pm, "adam" <captaindent...@gmail.com> wrote:
> > > I am trying to remove the dash bezels from my 88 YJ. I can get the
> > > driver side and middle out easily, but the passenger side only has 3
> > > screws on the top. After removing these it still seems "bolted" on. So
> > > removed the glovebox door...still no-go. The repair manual only shows
> > > the top 3 screws.
>
> > > Am I "screwed" or has anyone sucessfully done this without descructive
> > > dissemably?
>
> > > Thanks,
>
> > > Adam