YJ Axle Seal
05-20-2004, 07:40 PM
#41
Guest
Posts: n/a
Re: YJ Axle Seal
I was going to say something Bill, but wasn't 100% sure. I remember
having this discussion before maybe I think and there wasn't one on the
YJ I helped do. Only the one seal per side.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> I don't show an inner seal on the right side:
> http://www.----------.com/dana30/index.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jeepster wrote:
> >
> > I have a little pump I use for diff fluid and each time I take it
> > apart I pump in enough to give the gear lubrication
> >
> > I kind of though the inner and outer seals where the same but I was
> > thinking that the inner seal might be completely gone and overwhelming
> > the outer seal. I'm guessing now that the shaft is scored enough to
> > not give me a good seal or I messed up the seal on installation.
having this discussion before maybe I think and there wasn't one on the
YJ I helped do. Only the one seal per side.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> I don't show an inner seal on the right side:
> http://www.----------.com/dana30/index.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jeepster wrote:
> >
> > I have a little pump I use for diff fluid and each time I take it
> > apart I pump in enough to give the gear lubrication
> >
> > I kind of though the inner and outer seals where the same but I was
> > thinking that the inner seal might be completely gone and overwhelming
> > the outer seal. I'm guessing now that the shaft is scored enough to
> > not give me a good seal or I messed up the seal on installation.
05-20-2004, 08:40 PM
#42
Guest
Posts: n/a
Re: YJ Axle Seal
Also confirmed on Chrysler's parts page:
http://www.----------.com/dana30/YJDana30.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> I was going to say something Bill, but wasn't 100% sure. I remember
> having this discussion before maybe I think and there wasn't one on the
> YJ I helped do. Only the one seal per side.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
http://www.----------.com/dana30/YJDana30.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> I was going to say something Bill, but wasn't 100% sure. I remember
> having this discussion before maybe I think and there wasn't one on the
> YJ I helped do. Only the one seal per side.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
05-20-2004, 08:40 PM
#43
Guest
Posts: n/a
Re: YJ Axle Seal
Also confirmed on Chrysler's parts page:
http://www.----------.com/dana30/YJDana30.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> I was going to say something Bill, but wasn't 100% sure. I remember
> having this discussion before maybe I think and there wasn't one on the
> YJ I helped do. Only the one seal per side.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
http://www.----------.com/dana30/YJDana30.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> I was going to say something Bill, but wasn't 100% sure. I remember
> having this discussion before maybe I think and there wasn't one on the
> YJ I helped do. Only the one seal per side.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
05-20-2004, 08:40 PM
#44
Guest
Posts: n/a
Re: YJ Axle Seal
Also confirmed on Chrysler's parts page:
http://www.----------.com/dana30/YJDana30.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> I was going to say something Bill, but wasn't 100% sure. I remember
> having this discussion before maybe I think and there wasn't one on the
> YJ I helped do. Only the one seal per side.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
http://www.----------.com/dana30/YJDana30.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> I was going to say something Bill, but wasn't 100% sure. I remember
> having this discussion before maybe I think and there wasn't one on the
> YJ I helped do. Only the one seal per side.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
05-20-2004, 08:40 PM
#45
Guest
Posts: n/a
Re: YJ Axle Seal
Also confirmed on Chrysler's parts page:
http://www.----------.com/dana30/YJDana30.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> I was going to say something Bill, but wasn't 100% sure. I remember
> having this discussion before maybe I think and there wasn't one on the
> YJ I helped do. Only the one seal per side.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
http://www.----------.com/dana30/YJDana30.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> I was going to say something Bill, but wasn't 100% sure. I remember
> having this discussion before maybe I think and there wasn't one on the
> YJ I helped do. Only the one seal per side.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
05-20-2004, 09:38 PM
#46
Guest
Posts: n/a
Re: YJ Axle Seal
Otherwise it would need a fill and drain plug. No way you can trust
seals to be close to 100%.
Mike
"L.W.(ßill) ------ III" wrote:
>
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
seals to be close to 100%.
Mike
"L.W.(ßill) ------ III" wrote:
>
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
05-20-2004, 09:38 PM
#47
Guest
Posts: n/a
Re: YJ Axle Seal
Otherwise it would need a fill and drain plug. No way you can trust
seals to be close to 100%.
Mike
"L.W.(ßill) ------ III" wrote:
>
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
seals to be close to 100%.
Mike
"L.W.(ßill) ------ III" wrote:
>
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
05-20-2004, 09:38 PM
#48
Guest
Posts: n/a
Re: YJ Axle Seal
Otherwise it would need a fill and drain plug. No way you can trust
seals to be close to 100%.
Mike
"L.W.(ßill) ------ III" wrote:
>
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
seals to be close to 100%.
Mike
"L.W.(ßill) ------ III" wrote:
>
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
05-20-2004, 09:38 PM
#49
Guest
Posts: n/a
Re: YJ Axle Seal
Otherwise it would need a fill and drain plug. No way you can trust
seals to be close to 100%.
Mike
"L.W.(ßill) ------ III" wrote:
>
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
seals to be close to 100%.
Mike
"L.W.(ßill) ------ III" wrote:
>
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
05-20-2004, 10:19 PM
#50
Guest
Posts: n/a
Re: YJ Axle Seal
The inner bearing for the intermediate shaft has an integral seal.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40AD500E.4F7A739E@***.net...
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40AD500E.4F7A739E@***.net...
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
