XM Antenna install
#21
Guest
Posts: n/a
Re: XM Antenna install
Jeff, I'd think that position would cause lots of signal drop-outs due
to the rollbars or windshield frame getting in the way once in a while
as he drives around. Afterall, that satellite signal is strictly
line-of-sight as you are well aware. :)
Jerry
Jeff wrote:
> Take out the lil' rubber in the change holder on the top of the dash drill
> ur mounting holes and holes for cables...then the channel that runs under
> the windshield pops out so you can feed ur wires through...
> it's at eye sight, easier to hear and makes for a clean install....also
> when it comes time to sell, take the radio out and put the rubber back to
> cover all the holes and you'd never know it was there...
> Good luck
> Jeff
> '95 ZJ '03 TJ
> VE1WWH (Worlds Worst Ham)
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
to the rollbars or windshield frame getting in the way once in a while
as he drives around. Afterall, that satellite signal is strictly
line-of-sight as you are well aware. :)
Jerry
Jeff wrote:
> Take out the lil' rubber in the change holder on the top of the dash drill
> ur mounting holes and holes for cables...then the channel that runs under
> the windshield pops out so you can feed ur wires through...
> it's at eye sight, easier to hear and makes for a clean install....also
> when it comes time to sell, take the radio out and put the rubber back to
> cover all the holes and you'd never know it was there...
> Good luck
> Jeff
> '95 ZJ '03 TJ
> VE1WWH (Worlds Worst Ham)
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
#22
Guest
Posts: n/a
Re: XM Antenna install
Set it on the top of the dash board in the little paperclip cup. It should
work fine there. I have mine (in my BMW) stuck with a small dab of SuperGlue
to the dash board at the base of the windshield. It works great.
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
My
> wife doesn't need her Roady 2 anymore, so I thought I'd put it in my TJ.
I
> have the little magnetic antenna -- thought I'd see where people have
> mounted them. We used the vent mount in the XJ, but I really don't want
to
> use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
>
work fine there. I have mine (in my BMW) stuck with a small dab of SuperGlue
to the dash board at the base of the windshield. It works great.
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
My
> wife doesn't need her Roady 2 anymore, so I thought I'd put it in my TJ.
I
> have the little magnetic antenna -- thought I'd see where people have
> mounted them. We used the vent mount in the XJ, but I really don't want
to
> use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
>
#23
Guest
Posts: n/a
Re: XM Antenna install
Set it on the top of the dash board in the little paperclip cup. It should
work fine there. I have mine (in my BMW) stuck with a small dab of SuperGlue
to the dash board at the base of the windshield. It works great.
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
My
> wife doesn't need her Roady 2 anymore, so I thought I'd put it in my TJ.
I
> have the little magnetic antenna -- thought I'd see where people have
> mounted them. We used the vent mount in the XJ, but I really don't want
to
> use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
>
work fine there. I have mine (in my BMW) stuck with a small dab of SuperGlue
to the dash board at the base of the windshield. It works great.
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
My
> wife doesn't need her Roady 2 anymore, so I thought I'd put it in my TJ.
I
> have the little magnetic antenna -- thought I'd see where people have
> mounted them. We used the vent mount in the XJ, but I really don't want
to
> use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
>
#24
Guest
Posts: n/a
Re: XM Antenna install
Set it on the top of the dash board in the little paperclip cup. It should
work fine there. I have mine (in my BMW) stuck with a small dab of SuperGlue
to the dash board at the base of the windshield. It works great.
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
My
> wife doesn't need her Roady 2 anymore, so I thought I'd put it in my TJ.
I
> have the little magnetic antenna -- thought I'd see where people have
> mounted them. We used the vent mount in the XJ, but I really don't want
to
> use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
>
work fine there. I have mine (in my BMW) stuck with a small dab of SuperGlue
to the dash board at the base of the windshield. It works great.
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
My
> wife doesn't need her Roady 2 anymore, so I thought I'd put it in my TJ.
I
> have the little magnetic antenna -- thought I'd see where people have
> mounted them. We used the vent mount in the XJ, but I really don't want
to
> use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
>
#25
Guest
Posts: n/a
Re: XM Antenna install
Set it on the top of the dash board in the little paperclip cup. It should
work fine there. I have mine (in my BMW) stuck with a small dab of SuperGlue
to the dash board at the base of the windshield. It works great.
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
My
> wife doesn't need her Roady 2 anymore, so I thought I'd put it in my TJ.
I
> have the little magnetic antenna -- thought I'd see where people have
> mounted them. We used the vent mount in the XJ, but I really don't want
to
> use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
>
work fine there. I have mine (in my BMW) stuck with a small dab of SuperGlue
to the dash board at the base of the windshield. It works great.
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
My
> wife doesn't need her Roady 2 anymore, so I thought I'd put it in my TJ.
I
> have the little magnetic antenna -- thought I'd see where people have
> mounted them. We used the vent mount in the XJ, but I really don't want
to
> use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
>
#26
Guest
Posts: n/a
Re: XM Antenna install
Thanks for all the feedback... I like the idea of the antenna under the
rollbar padding. Still don't know what I'm going to do about the Roady2
unit (display unit). I need to find a better way to power it -- I use the
cigarette lighter for my cell phone charger AND my CB... already have a
2-way adapter. A 3-way would be too big.
Eric
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
> My wife doesn't need her Roady 2 anymore, so I thought I'd put it in my
> TJ. I have the little magnetic antenna -- thought I'd see where people
> have mounted them. We used the vent mount in the XJ, but I really don't
> want to use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
rollbar padding. Still don't know what I'm going to do about the Roady2
unit (display unit). I need to find a better way to power it -- I use the
cigarette lighter for my cell phone charger AND my CB... already have a
2-way adapter. A 3-way would be too big.
Eric
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
> My wife doesn't need her Roady 2 anymore, so I thought I'd put it in my
> TJ. I have the little magnetic antenna -- thought I'd see where people
> have mounted them. We used the vent mount in the XJ, but I really don't
> want to use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
#27
Guest
Posts: n/a
Re: XM Antenna install
Thanks for all the feedback... I like the idea of the antenna under the
rollbar padding. Still don't know what I'm going to do about the Roady2
unit (display unit). I need to find a better way to power it -- I use the
cigarette lighter for my cell phone charger AND my CB... already have a
2-way adapter. A 3-way would be too big.
Eric
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
> My wife doesn't need her Roady 2 anymore, so I thought I'd put it in my
> TJ. I have the little magnetic antenna -- thought I'd see where people
> have mounted them. We used the vent mount in the XJ, but I really don't
> want to use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
rollbar padding. Still don't know what I'm going to do about the Roady2
unit (display unit). I need to find a better way to power it -- I use the
cigarette lighter for my cell phone charger AND my CB... already have a
2-way adapter. A 3-way would be too big.
Eric
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
> My wife doesn't need her Roady 2 anymore, so I thought I'd put it in my
> TJ. I have the little magnetic antenna -- thought I'd see where people
> have mounted them. We used the vent mount in the XJ, but I really don't
> want to use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
#28
Guest
Posts: n/a
Re: XM Antenna install
Thanks for all the feedback... I like the idea of the antenna under the
rollbar padding. Still don't know what I'm going to do about the Roady2
unit (display unit). I need to find a better way to power it -- I use the
cigarette lighter for my cell phone charger AND my CB... already have a
2-way adapter. A 3-way would be too big.
Eric
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
> My wife doesn't need her Roady 2 anymore, so I thought I'd put it in my
> TJ. I have the little magnetic antenna -- thought I'd see where people
> have mounted them. We used the vent mount in the XJ, but I really don't
> want to use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
rollbar padding. Still don't know what I'm going to do about the Roady2
unit (display unit). I need to find a better way to power it -- I use the
cigarette lighter for my cell phone charger AND my CB... already have a
2-way adapter. A 3-way would be too big.
Eric
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
> My wife doesn't need her Roady 2 anymore, so I thought I'd put it in my
> TJ. I have the little magnetic antenna -- thought I'd see where people
> have mounted them. We used the vent mount in the XJ, but I really don't
> want to use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
#29
Guest
Posts: n/a
Re: XM Antenna install
Thanks for all the feedback... I like the idea of the antenna under the
rollbar padding. Still don't know what I'm going to do about the Roady2
unit (display unit). I need to find a better way to power it -- I use the
cigarette lighter for my cell phone charger AND my CB... already have a
2-way adapter. A 3-way would be too big.
Eric
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
> My wife doesn't need her Roady 2 anymore, so I thought I'd put it in my
> TJ. I have the little magnetic antenna -- thought I'd see where people
> have mounted them. We used the vent mount in the XJ, but I really don't
> want to use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
rollbar padding. Still don't know what I'm going to do about the Roady2
unit (display unit). I need to find a better way to power it -- I use the
cigarette lighter for my cell phone charger AND my CB... already have a
2-way adapter. A 3-way would be too big.
Eric
"Eric" <gymrat@baileyscorner.com> wrote in message
news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
> Anyone have any pics of how they installed their XM radios in their TJs?
> My wife doesn't need her Roady 2 anymore, so I thought I'd put it in my
> TJ. I have the little magnetic antenna -- thought I'd see where people
> have mounted them. We used the vent mount in the XJ, but I really don't
> want to use that in my TJ if I don't have to...
>
> Eric
> 99 TJ SE
>
#30
Guest
Posts: n/a
Re: XM Antenna install
Great spot for a GPS antenna, too.
Eric wrote:
> Thanks for all the feedback... I like the idea of the antenna under the
> rollbar padding. Still don't know what I'm going to do about the Roady2
> unit (display unit). I need to find a better way to power it -- I use the
> cigarette lighter for my cell phone charger AND my CB... already have a
> 2-way adapter. A 3-way would be too big.
>
> Eric
> "Eric" <gymrat@baileyscorner.com> wrote in message
> news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
>
>>Anyone have any pics of how they installed their XM radios in their TJs?
>>My wife doesn't need her Roady 2 anymore, so I thought I'd put it in my
>>TJ. I have the little magnetic antenna -- thought I'd see where people
>>have mounted them. We used the vent mount in the XJ, but I really don't
>>want to use that in my TJ if I don't have to...
>>
>>Eric
>>99 TJ SE
>>
>
>
>
--
__________________________________________________ _________
tw
71 Bill Stroppe Baja Bronco
03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
Eric wrote:
> Thanks for all the feedback... I like the idea of the antenna under the
> rollbar padding. Still don't know what I'm going to do about the Roady2
> unit (display unit). I need to find a better way to power it -- I use the
> cigarette lighter for my cell phone charger AND my CB... already have a
> 2-way adapter. A 3-way would be too big.
>
> Eric
> "Eric" <gymrat@baileyscorner.com> wrote in message
> news:q%i9e.11789$h6.2046@tornado.texas.rr.com...
>
>>Anyone have any pics of how they installed their XM radios in their TJs?
>>My wife doesn't need her Roady 2 anymore, so I thought I'd put it in my
>>TJ. I have the little magnetic antenna -- thought I'd see where people
>>have mounted them. We used the vent mount in the XJ, but I really don't
>>want to use that in my TJ if I don't have to...
>>
>>Eric
>>99 TJ SE
>>
>
>
>
--
__________________________________________________ _________
tw
71 Bill Stroppe Baja Bronco
03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________