xj Dana 44
#21
Guest
Posts: n/a
Re: xj Dana 44
Thanks Chuck, I will continue carrying just the short-side then. :)
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Chuck Bremer" <cbremer@*hotmail.com> wrote in message
news:41110b2e$0$65567$a1866201@newsreader.dsl.net. ..
> yup..it won't quite seat all the way. i was doing bearings a while ago,
had
> the shafts on the wrong sides and bent the crap out of the retaining plate
> trying to get it to seat (long shaft on the short side).
>
> :(
>
>
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:qB7Qc.2915$yh.744@fed1read05...
> > Is the long side really just too long to use in the short side?
> >
> > Jerry
> > --
> > Jerry Bransford
> > PP-ASEL N6TAY
> > See the Geezer Jeep at
> > http://members.***.net/jerrypb/
> > "Chuck Bremer" <cbremer@*hotmail.com> wrote in message
> > news:411104fd$0$8078$a1866201@newsreader.dsl.net.. .
> > > the D44 has 30 spline, 1-piece axle shafts. in a pinch (for a spare,
> > etc.)
> > > you can use the short-side shaft in place of the long side- there's
less
> > > than 1/2" difference between the length of the shafts, and it'll work
> well
> > > enough to get you home.
> > >
> > >
> > > "Doug Fritz" <jp4by4cya@comcast.net> wrote in message
> > > news:ysKdnQqHOdTkW43cRVn-hw@comcast.com...
> > > >
> > > > Can anyone tell me about the axle shafts in stock 87-90 Cherokee
> > Rear
> > > > Dana 44s? Are they 28 spline? Are they one piece axle shafts? I
> have
> > a
> > > > line on one to replace my D35 (anyone want a D35 with Detroit and
4.88
> > > > gears?) and I want to be sure I am getting a better axle.
> > > >
> > > > Thanks,
> > > >
> > > > Doug
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Chuck Bremer" <cbremer@*hotmail.com> wrote in message
news:41110b2e$0$65567$a1866201@newsreader.dsl.net. ..
> yup..it won't quite seat all the way. i was doing bearings a while ago,
had
> the shafts on the wrong sides and bent the crap out of the retaining plate
> trying to get it to seat (long shaft on the short side).
>
> :(
>
>
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:qB7Qc.2915$yh.744@fed1read05...
> > Is the long side really just too long to use in the short side?
> >
> > Jerry
> > --
> > Jerry Bransford
> > PP-ASEL N6TAY
> > See the Geezer Jeep at
> > http://members.***.net/jerrypb/
> > "Chuck Bremer" <cbremer@*hotmail.com> wrote in message
> > news:411104fd$0$8078$a1866201@newsreader.dsl.net.. .
> > > the D44 has 30 spline, 1-piece axle shafts. in a pinch (for a spare,
> > etc.)
> > > you can use the short-side shaft in place of the long side- there's
less
> > > than 1/2" difference between the length of the shafts, and it'll work
> well
> > > enough to get you home.
> > >
> > >
> > > "Doug Fritz" <jp4by4cya@comcast.net> wrote in message
> > > news:ysKdnQqHOdTkW43cRVn-hw@comcast.com...
> > > >
> > > > Can anyone tell me about the axle shafts in stock 87-90 Cherokee
> > Rear
> > > > Dana 44s? Are they 28 spline? Are they one piece axle shafts? I
> have
> > a
> > > > line on one to replace my D35 (anyone want a D35 with Detroit and
4.88
> > > > gears?) and I want to be sure I am getting a better axle.
> > > >
> > > > Thanks,
> > > >
> > > > Doug
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Thread
Thread Starter
Forum
Replies
Last Post
kodiakid@gmail.com
Jeep Mailing List
32
03-10-2006 01:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)