Wrangler AC Setting Problem..
07-01-2005, 01:26 PM
#1
Guest
Posts: n/a
Wrangler AC Setting Problem..
Does anyone have any ideas on why my 97 Wrangler AC will work on the
first three settings but when I turn it all the way up it cuts off.
It does this with the AC/Heat or just the fan.
First three work great when it hits the highest it goes silent..
With these 95 degree days here I could really use that high setting!!
:)
Thanks for any help!
P.S. I tried changing the relay behind the dash like some suggested a
while back. No luck.
SP
07-01-2005, 01:29 PM
#2
Guest
Posts: n/a
Re: Wrangler AC Setting Problem..
it is either the resistor or the ac control board both are easy fixes.. try
the resistor 1st 15 bucks... if no help the control board is about 60 bucks
both are easy to install
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
the resistor 1st 15 bucks... if no help the control board is about 60 bucks
both are easy to install
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
07-01-2005, 01:29 PM
#3
Guest
Posts: n/a
Re: Wrangler AC Setting Problem..
it is either the resistor or the ac control board both are easy fixes.. try
the resistor 1st 15 bucks... if no help the control board is about 60 bucks
both are easy to install
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
the resistor 1st 15 bucks... if no help the control board is about 60 bucks
both are easy to install
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
07-01-2005, 01:29 PM
#4
Guest
Posts: n/a
Re: Wrangler AC Setting Problem..
it is either the resistor or the ac control board both are easy fixes.. try
the resistor 1st 15 bucks... if no help the control board is about 60 bucks
both are easy to install
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
the resistor 1st 15 bucks... if no help the control board is about 60 bucks
both are easy to install
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
07-01-2005, 01:29 PM
#5
Guest
Posts: n/a
Re: Wrangler AC Setting Problem..
it is either the resistor or the ac control board both are easy fixes.. try
the resistor 1st 15 bucks... if no help the control board is about 60 bucks
both are easy to install
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
the resistor 1st 15 bucks... if no help the control board is about 60 bucks
both are easy to install
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
07-01-2005, 01:31 PM
#6
Guest
Posts: n/a
Re: Wrangler AC Setting Problem..
Sounds like the resistor, or the control unit.
Larry
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
Larry
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
07-01-2005, 01:31 PM
#7
Guest
Posts: n/a
Re: Wrangler AC Setting Problem..
Sounds like the resistor, or the control unit.
Larry
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
Larry
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
07-01-2005, 01:31 PM
#8
Guest
Posts: n/a
Re: Wrangler AC Setting Problem..
Sounds like the resistor, or the control unit.
Larry
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
Larry
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
07-01-2005, 01:31 PM
#9
Guest
Posts: n/a
Re: Wrangler AC Setting Problem..
Sounds like the resistor, or the control unit.
Larry
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
Larry
"sp" <dingle71@yahoo.com> wrote in message
news:8vuac1t205higqhumuo9prbp26fmlpqlj6@4ax.com...
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
>
> SP
07-01-2005, 02:37 PM
#10
Guest
Posts: n/a
Re: Wrangler AC Setting Problem..
Relay in your Power Distribution Center Box next to your battery:
http://www.----------.com/blower.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
sp wrote:
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
> SP
http://www.----------.com/blower.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
sp wrote:
>
> Does anyone have any ideas on why my 97 Wrangler AC will work on the
> first three settings but when I turn it all the way up it cuts off.
> It does this with the AC/Heat or just the fan.
> First three work great when it hits the highest it goes silent..
>
> With these 95 degree days here I could really use that high setting!!
> :)
>
> Thanks for any help!
> P.S. I tried changing the relay behind the dash like some suggested a
> while back. No luck.
>
> SP