Wow, had to help a friend with a TJ - Front wheel Fell Off!!
Guest
Posts: n/a
Re: Wow, had to help a friend with a TJ - Front wheel Fell Off!!
We only needed a 13 mm 12 point socket wrench to do this one. Oh and
the 36 mm axle nut wrench to get the big nut which we can 'borrow' from
the parts store.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Andrew wrote:
>
> When I get back from Iraq in December I'm going to pull the stock
> axles, front and rear, and replace them with Superior axles. Your
> post got me wondering, what special tools will I need to pull them? I
> have an 03 rubi, if that affects the front axle at all.
>
> Thanks,
> Andrew Whitley
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4085E182.ED718580@***.net>...
> > I thought it was pressed on tighter than that, I remember Matt
> > Macchiarolo pulling his apart with an axle puller and using in the axle
> > nut to sock it back on. Of course having the axle in or out makes no
> > difference to the floating bearing, Real Jeep hub.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
the 36 mm axle nut wrench to get the big nut which we can 'borrow' from
the parts store.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Andrew wrote:
>
> When I get back from Iraq in December I'm going to pull the stock
> axles, front and rear, and replace them with Superior axles. Your
> post got me wondering, what special tools will I need to pull them? I
> have an 03 rubi, if that affects the front axle at all.
>
> Thanks,
> Andrew Whitley
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4085E182.ED718580@***.net>...
> > I thought it was pressed on tighter than that, I remember Matt
> > Macchiarolo pulling his apart with an axle puller and using in the axle
> > nut to sock it back on. Of course having the axle in or out makes no
> > difference to the floating bearing, Real Jeep hub.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
Guest
Posts: n/a
Re: Wow, had to help a friend with a TJ - Front wheel Fell Off!!
We only needed a 13 mm 12 point socket wrench to do this one. Oh and
the 36 mm axle nut wrench to get the big nut which we can 'borrow' from
the parts store.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Andrew wrote:
>
> When I get back from Iraq in December I'm going to pull the stock
> axles, front and rear, and replace them with Superior axles. Your
> post got me wondering, what special tools will I need to pull them? I
> have an 03 rubi, if that affects the front axle at all.
>
> Thanks,
> Andrew Whitley
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4085E182.ED718580@***.net>...
> > I thought it was pressed on tighter than that, I remember Matt
> > Macchiarolo pulling his apart with an axle puller and using in the axle
> > nut to sock it back on. Of course having the axle in or out makes no
> > difference to the floating bearing, Real Jeep hub.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
the 36 mm axle nut wrench to get the big nut which we can 'borrow' from
the parts store.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Andrew wrote:
>
> When I get back from Iraq in December I'm going to pull the stock
> axles, front and rear, and replace them with Superior axles. Your
> post got me wondering, what special tools will I need to pull them? I
> have an 03 rubi, if that affects the front axle at all.
>
> Thanks,
> Andrew Whitley
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4085E182.ED718580@***.net>...
> > I thought it was pressed on tighter than that, I remember Matt
> > Macchiarolo pulling his apart with an axle puller and using in the axle
> > nut to sock it back on. Of course having the axle in or out makes no
> > difference to the floating bearing, Real Jeep hub.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
Guest
Posts: n/a
Re: Wow, had to help a friend with a TJ - Front wheel Fell Off!!
We only needed a 13 mm 12 point socket wrench to do this one. Oh and
the 36 mm axle nut wrench to get the big nut which we can 'borrow' from
the parts store.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Andrew wrote:
>
> When I get back from Iraq in December I'm going to pull the stock
> axles, front and rear, and replace them with Superior axles. Your
> post got me wondering, what special tools will I need to pull them? I
> have an 03 rubi, if that affects the front axle at all.
>
> Thanks,
> Andrew Whitley
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4085E182.ED718580@***.net>...
> > I thought it was pressed on tighter than that, I remember Matt
> > Macchiarolo pulling his apart with an axle puller and using in the axle
> > nut to sock it back on. Of course having the axle in or out makes no
> > difference to the floating bearing, Real Jeep hub.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
the 36 mm axle nut wrench to get the big nut which we can 'borrow' from
the parts store.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Andrew wrote:
>
> When I get back from Iraq in December I'm going to pull the stock
> axles, front and rear, and replace them with Superior axles. Your
> post got me wondering, what special tools will I need to pull them? I
> have an 03 rubi, if that affects the front axle at all.
>
> Thanks,
> Andrew Whitley
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4085E182.ED718580@***.net>...
> > I thought it was pressed on tighter than that, I remember Matt
> > Macchiarolo pulling his apart with an axle puller and using in the axle
> > nut to sock it back on. Of course having the axle in or out makes no
> > difference to the floating bearing, Real Jeep hub.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
Guest
Posts: n/a
Re: Wow, had to help a friend with a TJ - Front wheel Fell Off!!
Something similar happened to my bf a little while back- although it's
probably under different circumstances but his tire fell off too, after the
mechanic said he 'fixed' the wheel. He was about to take a turn onto the
freeway when it happened!
The next year he went to a different mechanic because his driver's seat
broke and he couldn't make the darned seat back stay up any longer. He had
an appoitment that afternoon, but when the guy looked at it, he said he
didn't have the right part to fix it, but offered a temporary fix so he
could drive it until the part came in- he actually offered to put a BOARD
propped up on the back seat floor and against his seat!!! Can you even
imagine?? What if he got into an accident??
I can't even begin to think of what other quick fixes that mechanic has come
up with. Needless to say, my bf high-tailed it out of there. When you don't
know a good mechanic, it sure can be a struggle sometimes.
coop
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4085B3DC.F6135D5@sympatico.ca...
> Wow, I mean holy ----, I think I have seen everything.
>
> A friend has a TJ and he blew a front axle u-joint so had a 'mechanic'
> friend with a shop help him change it.
>
> They couldn't get the right u-joint or it didn't seem like it because
> the jerk bent the ears on the yoke trying to hammer the old one out
> before he ended up using a cutting torch to cut the old u-joint out.
>
> So buddy says ok, I will get a new or the right u-joint tomorrow and
> come back after work. The mechanic says fine and puts the front hub
> back on and send him off on the 30 mile highway drive home.
>
> He gets home and on the first tight turn he takes to park, the front
> wheel falls off!!!!
>
> The 'mechanic' didn't install the short stub of the axle back into the
> hub. That is all that holds the inside bearing race in place! The race
> fell out on the first tight turn.
>
> I couldn't freaking believe it!
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
probably under different circumstances but his tire fell off too, after the
mechanic said he 'fixed' the wheel. He was about to take a turn onto the
freeway when it happened!
The next year he went to a different mechanic because his driver's seat
broke and he couldn't make the darned seat back stay up any longer. He had
an appoitment that afternoon, but when the guy looked at it, he said he
didn't have the right part to fix it, but offered a temporary fix so he
could drive it until the part came in- he actually offered to put a BOARD
propped up on the back seat floor and against his seat!!! Can you even
imagine?? What if he got into an accident??
I can't even begin to think of what other quick fixes that mechanic has come
up with. Needless to say, my bf high-tailed it out of there. When you don't
know a good mechanic, it sure can be a struggle sometimes.
coop
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4085B3DC.F6135D5@sympatico.ca...
> Wow, I mean holy ----, I think I have seen everything.
>
> A friend has a TJ and he blew a front axle u-joint so had a 'mechanic'
> friend with a shop help him change it.
>
> They couldn't get the right u-joint or it didn't seem like it because
> the jerk bent the ears on the yoke trying to hammer the old one out
> before he ended up using a cutting torch to cut the old u-joint out.
>
> So buddy says ok, I will get a new or the right u-joint tomorrow and
> come back after work. The mechanic says fine and puts the front hub
> back on and send him off on the 30 mile highway drive home.
>
> He gets home and on the first tight turn he takes to park, the front
> wheel falls off!!!!
>
> The 'mechanic' didn't install the short stub of the axle back into the
> hub. That is all that holds the inside bearing race in place! The race
> fell out on the first tight turn.
>
> I couldn't freaking believe it!
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
Guest
Posts: n/a
Re: Wow, had to help a friend with a TJ - Front wheel Fell Off!!
Something similar happened to my bf a little while back- although it's
probably under different circumstances but his tire fell off too, after the
mechanic said he 'fixed' the wheel. He was about to take a turn onto the
freeway when it happened!
The next year he went to a different mechanic because his driver's seat
broke and he couldn't make the darned seat back stay up any longer. He had
an appoitment that afternoon, but when the guy looked at it, he said he
didn't have the right part to fix it, but offered a temporary fix so he
could drive it until the part came in- he actually offered to put a BOARD
propped up on the back seat floor and against his seat!!! Can you even
imagine?? What if he got into an accident??
I can't even begin to think of what other quick fixes that mechanic has come
up with. Needless to say, my bf high-tailed it out of there. When you don't
know a good mechanic, it sure can be a struggle sometimes.
coop
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4085B3DC.F6135D5@sympatico.ca...
> Wow, I mean holy ----, I think I have seen everything.
>
> A friend has a TJ and he blew a front axle u-joint so had a 'mechanic'
> friend with a shop help him change it.
>
> They couldn't get the right u-joint or it didn't seem like it because
> the jerk bent the ears on the yoke trying to hammer the old one out
> before he ended up using a cutting torch to cut the old u-joint out.
>
> So buddy says ok, I will get a new or the right u-joint tomorrow and
> come back after work. The mechanic says fine and puts the front hub
> back on and send him off on the 30 mile highway drive home.
>
> He gets home and on the first tight turn he takes to park, the front
> wheel falls off!!!!
>
> The 'mechanic' didn't install the short stub of the axle back into the
> hub. That is all that holds the inside bearing race in place! The race
> fell out on the first tight turn.
>
> I couldn't freaking believe it!
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
probably under different circumstances but his tire fell off too, after the
mechanic said he 'fixed' the wheel. He was about to take a turn onto the
freeway when it happened!
The next year he went to a different mechanic because his driver's seat
broke and he couldn't make the darned seat back stay up any longer. He had
an appoitment that afternoon, but when the guy looked at it, he said he
didn't have the right part to fix it, but offered a temporary fix so he
could drive it until the part came in- he actually offered to put a BOARD
propped up on the back seat floor and against his seat!!! Can you even
imagine?? What if he got into an accident??
I can't even begin to think of what other quick fixes that mechanic has come
up with. Needless to say, my bf high-tailed it out of there. When you don't
know a good mechanic, it sure can be a struggle sometimes.
coop
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4085B3DC.F6135D5@sympatico.ca...
> Wow, I mean holy ----, I think I have seen everything.
>
> A friend has a TJ and he blew a front axle u-joint so had a 'mechanic'
> friend with a shop help him change it.
>
> They couldn't get the right u-joint or it didn't seem like it because
> the jerk bent the ears on the yoke trying to hammer the old one out
> before he ended up using a cutting torch to cut the old u-joint out.
>
> So buddy says ok, I will get a new or the right u-joint tomorrow and
> come back after work. The mechanic says fine and puts the front hub
> back on and send him off on the 30 mile highway drive home.
>
> He gets home and on the first tight turn he takes to park, the front
> wheel falls off!!!!
>
> The 'mechanic' didn't install the short stub of the axle back into the
> hub. That is all that holds the inside bearing race in place! The race
> fell out on the first tight turn.
>
> I couldn't freaking believe it!
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
Guest
Posts: n/a
Re: Wow, had to help a friend with a TJ - Front wheel Fell Off!!
Something similar happened to my bf a little while back- although it's
probably under different circumstances but his tire fell off too, after the
mechanic said he 'fixed' the wheel. He was about to take a turn onto the
freeway when it happened!
The next year he went to a different mechanic because his driver's seat
broke and he couldn't make the darned seat back stay up any longer. He had
an appoitment that afternoon, but when the guy looked at it, he said he
didn't have the right part to fix it, but offered a temporary fix so he
could drive it until the part came in- he actually offered to put a BOARD
propped up on the back seat floor and against his seat!!! Can you even
imagine?? What if he got into an accident??
I can't even begin to think of what other quick fixes that mechanic has come
up with. Needless to say, my bf high-tailed it out of there. When you don't
know a good mechanic, it sure can be a struggle sometimes.
coop
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4085B3DC.F6135D5@sympatico.ca...
> Wow, I mean holy ----, I think I have seen everything.
>
> A friend has a TJ and he blew a front axle u-joint so had a 'mechanic'
> friend with a shop help him change it.
>
> They couldn't get the right u-joint or it didn't seem like it because
> the jerk bent the ears on the yoke trying to hammer the old one out
> before he ended up using a cutting torch to cut the old u-joint out.
>
> So buddy says ok, I will get a new or the right u-joint tomorrow and
> come back after work. The mechanic says fine and puts the front hub
> back on and send him off on the 30 mile highway drive home.
>
> He gets home and on the first tight turn he takes to park, the front
> wheel falls off!!!!
>
> The 'mechanic' didn't install the short stub of the axle back into the
> hub. That is all that holds the inside bearing race in place! The race
> fell out on the first tight turn.
>
> I couldn't freaking believe it!
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
probably under different circumstances but his tire fell off too, after the
mechanic said he 'fixed' the wheel. He was about to take a turn onto the
freeway when it happened!
The next year he went to a different mechanic because his driver's seat
broke and he couldn't make the darned seat back stay up any longer. He had
an appoitment that afternoon, but when the guy looked at it, he said he
didn't have the right part to fix it, but offered a temporary fix so he
could drive it until the part came in- he actually offered to put a BOARD
propped up on the back seat floor and against his seat!!! Can you even
imagine?? What if he got into an accident??
I can't even begin to think of what other quick fixes that mechanic has come
up with. Needless to say, my bf high-tailed it out of there. When you don't
know a good mechanic, it sure can be a struggle sometimes.
coop
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4085B3DC.F6135D5@sympatico.ca...
> Wow, I mean holy ----, I think I have seen everything.
>
> A friend has a TJ and he blew a front axle u-joint so had a 'mechanic'
> friend with a shop help him change it.
>
> They couldn't get the right u-joint or it didn't seem like it because
> the jerk bent the ears on the yoke trying to hammer the old one out
> before he ended up using a cutting torch to cut the old u-joint out.
>
> So buddy says ok, I will get a new or the right u-joint tomorrow and
> come back after work. The mechanic says fine and puts the front hub
> back on and send him off on the 30 mile highway drive home.
>
> He gets home and on the first tight turn he takes to park, the front
> wheel falls off!!!!
>
> The 'mechanic' didn't install the short stub of the axle back into the
> hub. That is all that holds the inside bearing race in place! The race
> fell out on the first tight turn.
>
> I couldn't freaking believe it!
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
Guest
Posts: n/a
Re: Wow, had to help a friend with a TJ - Front wheel Fell Off!!
Something similar happened to my bf a little while back- although it's
probably under different circumstances but his tire fell off too, after the
mechanic said he 'fixed' the wheel. He was about to take a turn onto the
freeway when it happened!
The next year he went to a different mechanic because his driver's seat
broke and he couldn't make the darned seat back stay up any longer. He had
an appoitment that afternoon, but when the guy looked at it, he said he
didn't have the right part to fix it, but offered a temporary fix so he
could drive it until the part came in- he actually offered to put a BOARD
propped up on the back seat floor and against his seat!!! Can you even
imagine?? What if he got into an accident??
I can't even begin to think of what other quick fixes that mechanic has come
up with. Needless to say, my bf high-tailed it out of there. When you don't
know a good mechanic, it sure can be a struggle sometimes.
coop
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4085B3DC.F6135D5@sympatico.ca...
> Wow, I mean holy ----, I think I have seen everything.
>
> A friend has a TJ and he blew a front axle u-joint so had a 'mechanic'
> friend with a shop help him change it.
>
> They couldn't get the right u-joint or it didn't seem like it because
> the jerk bent the ears on the yoke trying to hammer the old one out
> before he ended up using a cutting torch to cut the old u-joint out.
>
> So buddy says ok, I will get a new or the right u-joint tomorrow and
> come back after work. The mechanic says fine and puts the front hub
> back on and send him off on the 30 mile highway drive home.
>
> He gets home and on the first tight turn he takes to park, the front
> wheel falls off!!!!
>
> The 'mechanic' didn't install the short stub of the axle back into the
> hub. That is all that holds the inside bearing race in place! The race
> fell out on the first tight turn.
>
> I couldn't freaking believe it!
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
probably under different circumstances but his tire fell off too, after the
mechanic said he 'fixed' the wheel. He was about to take a turn onto the
freeway when it happened!
The next year he went to a different mechanic because his driver's seat
broke and he couldn't make the darned seat back stay up any longer. He had
an appoitment that afternoon, but when the guy looked at it, he said he
didn't have the right part to fix it, but offered a temporary fix so he
could drive it until the part came in- he actually offered to put a BOARD
propped up on the back seat floor and against his seat!!! Can you even
imagine?? What if he got into an accident??
I can't even begin to think of what other quick fixes that mechanic has come
up with. Needless to say, my bf high-tailed it out of there. When you don't
know a good mechanic, it sure can be a struggle sometimes.
coop
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4085B3DC.F6135D5@sympatico.ca...
> Wow, I mean holy ----, I think I have seen everything.
>
> A friend has a TJ and he blew a front axle u-joint so had a 'mechanic'
> friend with a shop help him change it.
>
> They couldn't get the right u-joint or it didn't seem like it because
> the jerk bent the ears on the yoke trying to hammer the old one out
> before he ended up using a cutting torch to cut the old u-joint out.
>
> So buddy says ok, I will get a new or the right u-joint tomorrow and
> come back after work. The mechanic says fine and puts the front hub
> back on and send him off on the 30 mile highway drive home.
>
> He gets home and on the first tight turn he takes to park, the front
> wheel falls off!!!!
>
> The 'mechanic' didn't install the short stub of the axle back into the
> hub. That is all that holds the inside bearing race in place! The race
> fell out on the first tight turn.
>
> I couldn't freaking believe it!
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
Guest
Posts: n/a
Re: Wow, had to help a friend with a TJ - Front wheel Fell Off!!
Hi Mike,
Now you tell us, after the guy's tire falls off and rolls over ten
times, decapitating him. Oh well, he should have had a Real Jeep, where
we have never have lost a universal joint, and of course the Real Jeep
hub and floating bearings are not dependent on having an axle in place:
http://www.----------.com/dana25knuckle.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> The front hubs are 'barely' pressed together Bill.
>
> The axle stub that goes through them has to have the nut torqued down to
> 175 foot pounds to hold the bearing together.
>
> You can't use an axle puller to get the hub off on these suckers, the
> hub just pulls apart.
>
> Mike
Now you tell us, after the guy's tire falls off and rolls over ten
times, decapitating him. Oh well, he should have had a Real Jeep, where
we have never have lost a universal joint, and of course the Real Jeep
hub and floating bearings are not dependent on having an axle in place:
http://www.----------.com/dana25knuckle.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> The front hubs are 'barely' pressed together Bill.
>
> The axle stub that goes through them has to have the nut torqued down to
> 175 foot pounds to hold the bearing together.
>
> You can't use an axle puller to get the hub off on these suckers, the
> hub just pulls apart.
>
> Mike
Guest
Posts: n/a
Re: Wow, had to help a friend with a TJ - Front wheel Fell Off!!
Hi Mike,
Now you tell us, after the guy's tire falls off and rolls over ten
times, decapitating him. Oh well, he should have had a Real Jeep, where
we have never have lost a universal joint, and of course the Real Jeep
hub and floating bearings are not dependent on having an axle in place:
http://www.----------.com/dana25knuckle.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> The front hubs are 'barely' pressed together Bill.
>
> The axle stub that goes through them has to have the nut torqued down to
> 175 foot pounds to hold the bearing together.
>
> You can't use an axle puller to get the hub off on these suckers, the
> hub just pulls apart.
>
> Mike
Now you tell us, after the guy's tire falls off and rolls over ten
times, decapitating him. Oh well, he should have had a Real Jeep, where
we have never have lost a universal joint, and of course the Real Jeep
hub and floating bearings are not dependent on having an axle in place:
http://www.----------.com/dana25knuckle.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> The front hubs are 'barely' pressed together Bill.
>
> The axle stub that goes through them has to have the nut torqued down to
> 175 foot pounds to hold the bearing together.
>
> You can't use an axle puller to get the hub off on these suckers, the
> hub just pulls apart.
>
> Mike
Guest
Posts: n/a
Re: Wow, had to help a friend with a TJ - Front wheel Fell Off!!
Hi Mike,
Now you tell us, after the guy's tire falls off and rolls over ten
times, decapitating him. Oh well, he should have had a Real Jeep, where
we have never have lost a universal joint, and of course the Real Jeep
hub and floating bearings are not dependent on having an axle in place:
http://www.----------.com/dana25knuckle.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> The front hubs are 'barely' pressed together Bill.
>
> The axle stub that goes through them has to have the nut torqued down to
> 175 foot pounds to hold the bearing together.
>
> You can't use an axle puller to get the hub off on these suckers, the
> hub just pulls apart.
>
> Mike
Now you tell us, after the guy's tire falls off and rolls over ten
times, decapitating him. Oh well, he should have had a Real Jeep, where
we have never have lost a universal joint, and of course the Real Jeep
hub and floating bearings are not dependent on having an axle in place:
http://www.----------.com/dana25knuckle.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> The front hubs are 'barely' pressed together Bill.
>
> The axle stub that goes through them has to have the nut torqued down to
> 175 foot pounds to hold the bearing together.
>
> You can't use an axle puller to get the hub off on these suckers, the
> hub just pulls apart.
>
> Mike
