Would like oil leak fixed
07-23-2005, 01:17 PM
#1
Guest
Posts: n/a
Would like oil leak fixed
Does anybody have suggestion for local mechanic in San Diego to fix my
oil leaking '88 Wagoneer. It is not the valve cover and I already had rear
seal replaced. I would do it myself if I could locate the leak. It is more
of a nuissance leak, in that it is small but it drips right on the exhaust
manifold which causes a bad smell.
Saw a guy cleaning his engine compartment at the local do it yourself
carwash the other day, would this be a good way to remove old oil or is
there a better way, so that I can possibly see where it is leaking from.
oil leaking '88 Wagoneer. It is not the valve cover and I already had rear
seal replaced. I would do it myself if I could locate the leak. It is more
of a nuissance leak, in that it is small but it drips right on the exhaust
manifold which causes a bad smell.
Saw a guy cleaning his engine compartment at the local do it yourself
carwash the other day, would this be a good way to remove old oil or is
there a better way, so that I can possibly see where it is leaking from.
07-23-2005, 01:33 PM
#2
Guest
Posts: n/a
Re: Would like oil leak fixed
mike92105 did pass the time by typing:
> Does anybody have suggestion for local mechanic in San Diego to fix my
> oil leaking '88 Wagoneer. It is not the valve cover and I already had rear
> seal replaced. I would do it myself if I could locate the leak. It is more
> of a nuissance leak, in that it is small but it drips right on the exhaust
> manifold which causes a bad smell.
> Saw a guy cleaning his engine compartment at the local do it yourself
> carwash the other day, would this be a good way to remove old oil or is
> there a better way, so that I can possibly see where it is leaking from.
Just remember if you use a pressure washer.. do not use the high pressure
when pointing around gaskets or you can rip the gasket material or drive
water into the oil pan. Also cover the distributor with a baggie (I use
foil) and don't spray a hot engine. And what ever you do, wear protective
eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
I used the Gunk brand foaming engine cleaner on my old truck. All it took
to wash off was a garden hose... Having a gravel driveway was a nice thing
at that time. Don't use it on a concrete driveway unless you like massive
stains.
--
DougW
> Does anybody have suggestion for local mechanic in San Diego to fix my
> oil leaking '88 Wagoneer. It is not the valve cover and I already had rear
> seal replaced. I would do it myself if I could locate the leak. It is more
> of a nuissance leak, in that it is small but it drips right on the exhaust
> manifold which causes a bad smell.
> Saw a guy cleaning his engine compartment at the local do it yourself
> carwash the other day, would this be a good way to remove old oil or is
> there a better way, so that I can possibly see where it is leaking from.
Just remember if you use a pressure washer.. do not use the high pressure
when pointing around gaskets or you can rip the gasket material or drive
water into the oil pan. Also cover the distributor with a baggie (I use
foil) and don't spray a hot engine. And what ever you do, wear protective
eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
I used the Gunk brand foaming engine cleaner on my old truck. All it took
to wash off was a garden hose... Having a gravel driveway was a nice thing
at that time. Don't use it on a concrete driveway unless you like massive
stains.
--
DougW
07-23-2005, 01:33 PM
#3
Guest
Posts: n/a
Re: Would like oil leak fixed
mike92105 did pass the time by typing:
> Does anybody have suggestion for local mechanic in San Diego to fix my
> oil leaking '88 Wagoneer. It is not the valve cover and I already had rear
> seal replaced. I would do it myself if I could locate the leak. It is more
> of a nuissance leak, in that it is small but it drips right on the exhaust
> manifold which causes a bad smell.
> Saw a guy cleaning his engine compartment at the local do it yourself
> carwash the other day, would this be a good way to remove old oil or is
> there a better way, so that I can possibly see where it is leaking from.
Just remember if you use a pressure washer.. do not use the high pressure
when pointing around gaskets or you can rip the gasket material or drive
water into the oil pan. Also cover the distributor with a baggie (I use
foil) and don't spray a hot engine. And what ever you do, wear protective
eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
I used the Gunk brand foaming engine cleaner on my old truck. All it took
to wash off was a garden hose... Having a gravel driveway was a nice thing
at that time. Don't use it on a concrete driveway unless you like massive
stains.
--
DougW
> Does anybody have suggestion for local mechanic in San Diego to fix my
> oil leaking '88 Wagoneer. It is not the valve cover and I already had rear
> seal replaced. I would do it myself if I could locate the leak. It is more
> of a nuissance leak, in that it is small but it drips right on the exhaust
> manifold which causes a bad smell.
> Saw a guy cleaning his engine compartment at the local do it yourself
> carwash the other day, would this be a good way to remove old oil or is
> there a better way, so that I can possibly see where it is leaking from.
Just remember if you use a pressure washer.. do not use the high pressure
when pointing around gaskets or you can rip the gasket material or drive
water into the oil pan. Also cover the distributor with a baggie (I use
foil) and don't spray a hot engine. And what ever you do, wear protective
eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
I used the Gunk brand foaming engine cleaner on my old truck. All it took
to wash off was a garden hose... Having a gravel driveway was a nice thing
at that time. Don't use it on a concrete driveway unless you like massive
stains.
--
DougW
07-23-2005, 01:33 PM
#4
Guest
Posts: n/a
Re: Would like oil leak fixed
mike92105 did pass the time by typing:
> Does anybody have suggestion for local mechanic in San Diego to fix my
> oil leaking '88 Wagoneer. It is not the valve cover and I already had rear
> seal replaced. I would do it myself if I could locate the leak. It is more
> of a nuissance leak, in that it is small but it drips right on the exhaust
> manifold which causes a bad smell.
> Saw a guy cleaning his engine compartment at the local do it yourself
> carwash the other day, would this be a good way to remove old oil or is
> there a better way, so that I can possibly see where it is leaking from.
Just remember if you use a pressure washer.. do not use the high pressure
when pointing around gaskets or you can rip the gasket material or drive
water into the oil pan. Also cover the distributor with a baggie (I use
foil) and don't spray a hot engine. And what ever you do, wear protective
eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
I used the Gunk brand foaming engine cleaner on my old truck. All it took
to wash off was a garden hose... Having a gravel driveway was a nice thing
at that time. Don't use it on a concrete driveway unless you like massive
stains.
--
DougW
> Does anybody have suggestion for local mechanic in San Diego to fix my
> oil leaking '88 Wagoneer. It is not the valve cover and I already had rear
> seal replaced. I would do it myself if I could locate the leak. It is more
> of a nuissance leak, in that it is small but it drips right on the exhaust
> manifold which causes a bad smell.
> Saw a guy cleaning his engine compartment at the local do it yourself
> carwash the other day, would this be a good way to remove old oil or is
> there a better way, so that I can possibly see where it is leaking from.
Just remember if you use a pressure washer.. do not use the high pressure
when pointing around gaskets or you can rip the gasket material or drive
water into the oil pan. Also cover the distributor with a baggie (I use
foil) and don't spray a hot engine. And what ever you do, wear protective
eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
I used the Gunk brand foaming engine cleaner on my old truck. All it took
to wash off was a garden hose... Having a gravel driveway was a nice thing
at that time. Don't use it on a concrete driveway unless you like massive
stains.
--
DougW
07-23-2005, 01:33 PM
#5
Guest
Posts: n/a
Re: Would like oil leak fixed
mike92105 did pass the time by typing:
> Does anybody have suggestion for local mechanic in San Diego to fix my
> oil leaking '88 Wagoneer. It is not the valve cover and I already had rear
> seal replaced. I would do it myself if I could locate the leak. It is more
> of a nuissance leak, in that it is small but it drips right on the exhaust
> manifold which causes a bad smell.
> Saw a guy cleaning his engine compartment at the local do it yourself
> carwash the other day, would this be a good way to remove old oil or is
> there a better way, so that I can possibly see where it is leaking from.
Just remember if you use a pressure washer.. do not use the high pressure
when pointing around gaskets or you can rip the gasket material or drive
water into the oil pan. Also cover the distributor with a baggie (I use
foil) and don't spray a hot engine. And what ever you do, wear protective
eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
I used the Gunk brand foaming engine cleaner on my old truck. All it took
to wash off was a garden hose... Having a gravel driveway was a nice thing
at that time. Don't use it on a concrete driveway unless you like massive
stains.
--
DougW
> Does anybody have suggestion for local mechanic in San Diego to fix my
> oil leaking '88 Wagoneer. It is not the valve cover and I already had rear
> seal replaced. I would do it myself if I could locate the leak. It is more
> of a nuissance leak, in that it is small but it drips right on the exhaust
> manifold which causes a bad smell.
> Saw a guy cleaning his engine compartment at the local do it yourself
> carwash the other day, would this be a good way to remove old oil or is
> there a better way, so that I can possibly see where it is leaking from.
Just remember if you use a pressure washer.. do not use the high pressure
when pointing around gaskets or you can rip the gasket material or drive
water into the oil pan. Also cover the distributor with a baggie (I use
foil) and don't spray a hot engine. And what ever you do, wear protective
eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
I used the Gunk brand foaming engine cleaner on my old truck. All it took
to wash off was a garden hose... Having a gravel driveway was a nice thing
at that time. Don't use it on a concrete driveway unless you like massive
stains.
--
DougW
07-23-2005, 01:43 PM
#6
Guest
Posts: n/a
Re: Would like oil leak fixed
I cleaned my Waggy engine by hand with a bucket of water and cloths - took
1/2 a day and was thoroughly messy and unpleasant, but I didn't short out
the waggy crappy electrics, and I did a good job. Like Doug, I use Gunk -
use some gloves to avoid irritating the hell out of your skin.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"DougW" <post.replies@invalid.address> wrote in message
news:dbvEe.27313$mC.22782@okepread07...
> mike92105 did pass the time by typing:
> > Does anybody have suggestion for local mechanic in San Diego to fix
my
> > oil leaking '88 Wagoneer. It is not the valve cover and I already had
rear
> > seal replaced. I would do it myself if I could locate the leak. It is
more
> > of a nuissance leak, in that it is small but it drips right on the
exhaust
> > manifold which causes a bad smell.
> > Saw a guy cleaning his engine compartment at the local do it
yourself
> > carwash the other day, would this be a good way to remove old oil or is
> > there a better way, so that I can possibly see where it is leaking from.
>
> Just remember if you use a pressure washer.. do not use the high pressure
> when pointing around gaskets or you can rip the gasket material or drive
> water into the oil pan. Also cover the distributor with a baggie (I use
> foil) and don't spray a hot engine. And what ever you do, wear protective
> eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
>
> I used the Gunk brand foaming engine cleaner on my old truck. All it took
> to wash off was a garden hose... Having a gravel driveway was a nice thing
> at that time. Don't use it on a concrete driveway unless you like massive
> stains.
>
> --
> DougW
>
>
>
1/2 a day and was thoroughly messy and unpleasant, but I didn't short out
the waggy crappy electrics, and I did a good job. Like Doug, I use Gunk -
use some gloves to avoid irritating the hell out of your skin.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"DougW" <post.replies@invalid.address> wrote in message
news:dbvEe.27313$mC.22782@okepread07...
> mike92105 did pass the time by typing:
> > Does anybody have suggestion for local mechanic in San Diego to fix
my
> > oil leaking '88 Wagoneer. It is not the valve cover and I already had
rear
> > seal replaced. I would do it myself if I could locate the leak. It is
more
> > of a nuissance leak, in that it is small but it drips right on the
exhaust
> > manifold which causes a bad smell.
> > Saw a guy cleaning his engine compartment at the local do it
yourself
> > carwash the other day, would this be a good way to remove old oil or is
> > there a better way, so that I can possibly see where it is leaking from.
>
> Just remember if you use a pressure washer.. do not use the high pressure
> when pointing around gaskets or you can rip the gasket material or drive
> water into the oil pan. Also cover the distributor with a baggie (I use
> foil) and don't spray a hot engine. And what ever you do, wear protective
> eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
>
> I used the Gunk brand foaming engine cleaner on my old truck. All it took
> to wash off was a garden hose... Having a gravel driveway was a nice thing
> at that time. Don't use it on a concrete driveway unless you like massive
> stains.
>
> --
> DougW
>
>
>
07-23-2005, 01:43 PM
#7
Guest
Posts: n/a
Re: Would like oil leak fixed
I cleaned my Waggy engine by hand with a bucket of water and cloths - took
1/2 a day and was thoroughly messy and unpleasant, but I didn't short out
the waggy crappy electrics, and I did a good job. Like Doug, I use Gunk -
use some gloves to avoid irritating the hell out of your skin.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"DougW" <post.replies@invalid.address> wrote in message
news:dbvEe.27313$mC.22782@okepread07...
> mike92105 did pass the time by typing:
> > Does anybody have suggestion for local mechanic in San Diego to fix
my
> > oil leaking '88 Wagoneer. It is not the valve cover and I already had
rear
> > seal replaced. I would do it myself if I could locate the leak. It is
more
> > of a nuissance leak, in that it is small but it drips right on the
exhaust
> > manifold which causes a bad smell.
> > Saw a guy cleaning his engine compartment at the local do it
yourself
> > carwash the other day, would this be a good way to remove old oil or is
> > there a better way, so that I can possibly see where it is leaking from.
>
> Just remember if you use a pressure washer.. do not use the high pressure
> when pointing around gaskets or you can rip the gasket material or drive
> water into the oil pan. Also cover the distributor with a baggie (I use
> foil) and don't spray a hot engine. And what ever you do, wear protective
> eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
>
> I used the Gunk brand foaming engine cleaner on my old truck. All it took
> to wash off was a garden hose... Having a gravel driveway was a nice thing
> at that time. Don't use it on a concrete driveway unless you like massive
> stains.
>
> --
> DougW
>
>
>
1/2 a day and was thoroughly messy and unpleasant, but I didn't short out
the waggy crappy electrics, and I did a good job. Like Doug, I use Gunk -
use some gloves to avoid irritating the hell out of your skin.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"DougW" <post.replies@invalid.address> wrote in message
news:dbvEe.27313$mC.22782@okepread07...
> mike92105 did pass the time by typing:
> > Does anybody have suggestion for local mechanic in San Diego to fix
my
> > oil leaking '88 Wagoneer. It is not the valve cover and I already had
rear
> > seal replaced. I would do it myself if I could locate the leak. It is
more
> > of a nuissance leak, in that it is small but it drips right on the
exhaust
> > manifold which causes a bad smell.
> > Saw a guy cleaning his engine compartment at the local do it
yourself
> > carwash the other day, would this be a good way to remove old oil or is
> > there a better way, so that I can possibly see where it is leaking from.
>
> Just remember if you use a pressure washer.. do not use the high pressure
> when pointing around gaskets or you can rip the gasket material or drive
> water into the oil pan. Also cover the distributor with a baggie (I use
> foil) and don't spray a hot engine. And what ever you do, wear protective
> eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
>
> I used the Gunk brand foaming engine cleaner on my old truck. All it took
> to wash off was a garden hose... Having a gravel driveway was a nice thing
> at that time. Don't use it on a concrete driveway unless you like massive
> stains.
>
> --
> DougW
>
>
>
07-23-2005, 01:43 PM
#8
Guest
Posts: n/a
Re: Would like oil leak fixed
I cleaned my Waggy engine by hand with a bucket of water and cloths - took
1/2 a day and was thoroughly messy and unpleasant, but I didn't short out
the waggy crappy electrics, and I did a good job. Like Doug, I use Gunk -
use some gloves to avoid irritating the hell out of your skin.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"DougW" <post.replies@invalid.address> wrote in message
news:dbvEe.27313$mC.22782@okepread07...
> mike92105 did pass the time by typing:
> > Does anybody have suggestion for local mechanic in San Diego to fix
my
> > oil leaking '88 Wagoneer. It is not the valve cover and I already had
rear
> > seal replaced. I would do it myself if I could locate the leak. It is
more
> > of a nuissance leak, in that it is small but it drips right on the
exhaust
> > manifold which causes a bad smell.
> > Saw a guy cleaning his engine compartment at the local do it
yourself
> > carwash the other day, would this be a good way to remove old oil or is
> > there a better way, so that I can possibly see where it is leaking from.
>
> Just remember if you use a pressure washer.. do not use the high pressure
> when pointing around gaskets or you can rip the gasket material or drive
> water into the oil pan. Also cover the distributor with a baggie (I use
> foil) and don't spray a hot engine. And what ever you do, wear protective
> eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
>
> I used the Gunk brand foaming engine cleaner on my old truck. All it took
> to wash off was a garden hose... Having a gravel driveway was a nice thing
> at that time. Don't use it on a concrete driveway unless you like massive
> stains.
>
> --
> DougW
>
>
>
1/2 a day and was thoroughly messy and unpleasant, but I didn't short out
the waggy crappy electrics, and I did a good job. Like Doug, I use Gunk -
use some gloves to avoid irritating the hell out of your skin.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"DougW" <post.replies@invalid.address> wrote in message
news:dbvEe.27313$mC.22782@okepread07...
> mike92105 did pass the time by typing:
> > Does anybody have suggestion for local mechanic in San Diego to fix
my
> > oil leaking '88 Wagoneer. It is not the valve cover and I already had
rear
> > seal replaced. I would do it myself if I could locate the leak. It is
more
> > of a nuissance leak, in that it is small but it drips right on the
exhaust
> > manifold which causes a bad smell.
> > Saw a guy cleaning his engine compartment at the local do it
yourself
> > carwash the other day, would this be a good way to remove old oil or is
> > there a better way, so that I can possibly see where it is leaking from.
>
> Just remember if you use a pressure washer.. do not use the high pressure
> when pointing around gaskets or you can rip the gasket material or drive
> water into the oil pan. Also cover the distributor with a baggie (I use
> foil) and don't spray a hot engine. And what ever you do, wear protective
> eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
>
> I used the Gunk brand foaming engine cleaner on my old truck. All it took
> to wash off was a garden hose... Having a gravel driveway was a nice thing
> at that time. Don't use it on a concrete driveway unless you like massive
> stains.
>
> --
> DougW
>
>
>
07-23-2005, 01:43 PM
#9
Guest
Posts: n/a
Re: Would like oil leak fixed
I cleaned my Waggy engine by hand with a bucket of water and cloths - took
1/2 a day and was thoroughly messy and unpleasant, but I didn't short out
the waggy crappy electrics, and I did a good job. Like Doug, I use Gunk -
use some gloves to avoid irritating the hell out of your skin.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"DougW" <post.replies@invalid.address> wrote in message
news:dbvEe.27313$mC.22782@okepread07...
> mike92105 did pass the time by typing:
> > Does anybody have suggestion for local mechanic in San Diego to fix
my
> > oil leaking '88 Wagoneer. It is not the valve cover and I already had
rear
> > seal replaced. I would do it myself if I could locate the leak. It is
more
> > of a nuissance leak, in that it is small but it drips right on the
exhaust
> > manifold which causes a bad smell.
> > Saw a guy cleaning his engine compartment at the local do it
yourself
> > carwash the other day, would this be a good way to remove old oil or is
> > there a better way, so that I can possibly see where it is leaking from.
>
> Just remember if you use a pressure washer.. do not use the high pressure
> when pointing around gaskets or you can rip the gasket material or drive
> water into the oil pan. Also cover the distributor with a baggie (I use
> foil) and don't spray a hot engine. And what ever you do, wear protective
> eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
>
> I used the Gunk brand foaming engine cleaner on my old truck. All it took
> to wash off was a garden hose... Having a gravel driveway was a nice thing
> at that time. Don't use it on a concrete driveway unless you like massive
> stains.
>
> --
> DougW
>
>
>
1/2 a day and was thoroughly messy and unpleasant, but I didn't short out
the waggy crappy electrics, and I did a good job. Like Doug, I use Gunk -
use some gloves to avoid irritating the hell out of your skin.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"DougW" <post.replies@invalid.address> wrote in message
news:dbvEe.27313$mC.22782@okepread07...
> mike92105 did pass the time by typing:
> > Does anybody have suggestion for local mechanic in San Diego to fix
my
> > oil leaking '88 Wagoneer. It is not the valve cover and I already had
rear
> > seal replaced. I would do it myself if I could locate the leak. It is
more
> > of a nuissance leak, in that it is small but it drips right on the
exhaust
> > manifold which causes a bad smell.
> > Saw a guy cleaning his engine compartment at the local do it
yourself
> > carwash the other day, would this be a good way to remove old oil or is
> > there a better way, so that I can possibly see where it is leaking from.
>
> Just remember if you use a pressure washer.. do not use the high pressure
> when pointing around gaskets or you can rip the gasket material or drive
> water into the oil pan. Also cover the distributor with a baggie (I use
> foil) and don't spray a hot engine. And what ever you do, wear protective
> eyewear.. cleaner and oil/crud in the eyeball sucks muchly.
>
> I used the Gunk brand foaming engine cleaner on my old truck. All it took
> to wash off was a garden hose... Having a gravel driveway was a nice thing
> at that time. Don't use it on a concrete driveway unless you like massive
> stains.
>
> --
> DougW
>
>
>
07-23-2005, 01:51 PM
#10
Guest
Posts: n/a
Re: Would like oil leak fixed
Which engine is it? If the V8, then sometimes oil leaks out the rear of the
intake manifold gasket. DIY carwash is a good way to remove oil, if you
don't get the ignition system wet.
Earle
"mike92105" <mike92105@***.net> wrote in message
news:uZuEe.104105$Qo.35964@fed1read01...
> Does anybody have suggestion for local mechanic in San Diego to fix
my
> oil leaking '88 Wagoneer. It is not the valve cover and I already had rear
> seal replaced. I would do it myself if I could locate the leak. It is more
> of a nuissance leak, in that it is small but it drips right on the exhaust
> manifold which causes a bad smell.
> Saw a guy cleaning his engine compartment at the local do it yourself
> carwash the other day, would this be a good way to remove old oil or is
> there a better way, so that I can possibly see where it is leaking from.
>
>
intake manifold gasket. DIY carwash is a good way to remove oil, if you
don't get the ignition system wet.
Earle
"mike92105" <mike92105@***.net> wrote in message
news:uZuEe.104105$Qo.35964@fed1read01...
> Does anybody have suggestion for local mechanic in San Diego to fix
my
> oil leaking '88 Wagoneer. It is not the valve cover and I already had rear
> seal replaced. I would do it myself if I could locate the leak. It is more
> of a nuissance leak, in that it is small but it drips right on the exhaust
> manifold which causes a bad smell.
> Saw a guy cleaning his engine compartment at the local do it yourself
> carwash the other day, would this be a good way to remove old oil or is
> there a better way, so that I can possibly see where it is leaking from.
>
>
