Is it worth it?
02-26-2007, 10:05 PM
#11
Guest
Posts: n/a
Re: Is it worth it?
If its an 86 Cherokee with the 2.5L it does not have a frame, it is a
unibody.
Carl
<michael.white@charter.net> wrote in message
news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...
> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
>> I just bought an 86 Cherokee. I recently started to remove the
>> interior and carpet and discovered the front floor pans were shot as
>> well as two spots behind the front seats. How do I decide whether the
>> vehicle is worth repairing. It looks as though the whole underside is
>> fairly corroded. The engine is fairly new(2.5L)less than 25,000 mi on
>> a new long block. The body is in great shape. How long will this thing
>> last if I replace the floor pans? It runs great, has a three inch
>> lift, and near new 30x9.5 bfg all terrains on it. Is it worth it? What
>> axles does this thing have under it?
>>
>> Thanks,
>>
>> Greg
>
>
> Greg,
>
> Since your Jeep has a frame (i.e. it's not a unibody), you should be
> able to take it to a welding shop and have them weld on new floor pans
> for well under $200.
>
> Michael
>
unibody.
Carl
<michael.white@charter.net> wrote in message
news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...
> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
>> I just bought an 86 Cherokee. I recently started to remove the
>> interior and carpet and discovered the front floor pans were shot as
>> well as two spots behind the front seats. How do I decide whether the
>> vehicle is worth repairing. It looks as though the whole underside is
>> fairly corroded. The engine is fairly new(2.5L)less than 25,000 mi on
>> a new long block. The body is in great shape. How long will this thing
>> last if I replace the floor pans? It runs great, has a three inch
>> lift, and near new 30x9.5 bfg all terrains on it. Is it worth it? What
>> axles does this thing have under it?
>>
>> Thanks,
>>
>> Greg
>
>
> Greg,
>
> Since your Jeep has a frame (i.e. it's not a unibody), you should be
> able to take it to a welding shop and have them weld on new floor pans
> for well under $200.
>
> Michael
>
02-26-2007, 10:05 PM
#12
Guest
Posts: n/a
Re: Is it worth it?
If its an 86 Cherokee with the 2.5L it does not have a frame, it is a
unibody.
Carl
<michael.white@charter.net> wrote in message
news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...
> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
>> I just bought an 86 Cherokee. I recently started to remove the
>> interior and carpet and discovered the front floor pans were shot as
>> well as two spots behind the front seats. How do I decide whether the
>> vehicle is worth repairing. It looks as though the whole underside is
>> fairly corroded. The engine is fairly new(2.5L)less than 25,000 mi on
>> a new long block. The body is in great shape. How long will this thing
>> last if I replace the floor pans? It runs great, has a three inch
>> lift, and near new 30x9.5 bfg all terrains on it. Is it worth it? What
>> axles does this thing have under it?
>>
>> Thanks,
>>
>> Greg
>
>
> Greg,
>
> Since your Jeep has a frame (i.e. it's not a unibody), you should be
> able to take it to a welding shop and have them weld on new floor pans
> for well under $200.
>
> Michael
>
unibody.
Carl
<michael.white@charter.net> wrote in message
news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...
> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
>> I just bought an 86 Cherokee. I recently started to remove the
>> interior and carpet and discovered the front floor pans were shot as
>> well as two spots behind the front seats. How do I decide whether the
>> vehicle is worth repairing. It looks as though the whole underside is
>> fairly corroded. The engine is fairly new(2.5L)less than 25,000 mi on
>> a new long block. The body is in great shape. How long will this thing
>> last if I replace the floor pans? It runs great, has a three inch
>> lift, and near new 30x9.5 bfg all terrains on it. Is it worth it? What
>> axles does this thing have under it?
>>
>> Thanks,
>>
>> Greg
>
>
> Greg,
>
> Since your Jeep has a frame (i.e. it's not a unibody), you should be
> able to take it to a welding shop and have them weld on new floor pans
> for well under $200.
>
> Michael
>
02-26-2007, 10:05 PM
#13
Guest
Posts: n/a
Re: Is it worth it?
If its an 86 Cherokee with the 2.5L it does not have a frame, it is a
unibody.
Carl
<michael.white@charter.net> wrote in message
news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...
> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
>> I just bought an 86 Cherokee. I recently started to remove the
>> interior and carpet and discovered the front floor pans were shot as
>> well as two spots behind the front seats. How do I decide whether the
>> vehicle is worth repairing. It looks as though the whole underside is
>> fairly corroded. The engine is fairly new(2.5L)less than 25,000 mi on
>> a new long block. The body is in great shape. How long will this thing
>> last if I replace the floor pans? It runs great, has a three inch
>> lift, and near new 30x9.5 bfg all terrains on it. Is it worth it? What
>> axles does this thing have under it?
>>
>> Thanks,
>>
>> Greg
>
>
> Greg,
>
> Since your Jeep has a frame (i.e. it's not a unibody), you should be
> able to take it to a welding shop and have them weld on new floor pans
> for well under $200.
>
> Michael
>
unibody.
Carl
<michael.white@charter.net> wrote in message
news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...
> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
>> I just bought an 86 Cherokee. I recently started to remove the
>> interior and carpet and discovered the front floor pans were shot as
>> well as two spots behind the front seats. How do I decide whether the
>> vehicle is worth repairing. It looks as though the whole underside is
>> fairly corroded. The engine is fairly new(2.5L)less than 25,000 mi on
>> a new long block. The body is in great shape. How long will this thing
>> last if I replace the floor pans? It runs great, has a three inch
>> lift, and near new 30x9.5 bfg all terrains on it. Is it worth it? What
>> axles does this thing have under it?
>>
>> Thanks,
>>
>> Greg
>
>
> Greg,
>
> Since your Jeep has a frame (i.e. it's not a unibody), you should be
> able to take it to a welding shop and have them weld on new floor pans
> for well under $200.
>
> Michael
>
02-26-2007, 10:06 PM
#14
Guest
Posts: n/a
Re: Is it worth it?
<michael.white@charter.net> wrote in message
news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...
> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
>> I just bought an 86 Cherokee.
>
> Greg,
>
> Since your Jeep has a frame (i.e. it's not a unibody), you should be
> able to take it to a welding shop and have them weld on new floor pans
> for well under $200.
>
> Michael
>
'86 Cherokee with a 2.5L engine should be an XJ, in which case it kinda is
unibody, they called it "uniframe." The frame members are part of the body.
His rusty spots are pretty typical.
02-26-2007, 10:06 PM
#15
Guest
Posts: n/a
Re: Is it worth it?
<michael.white@charter.net> wrote in message
news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...
> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
>> I just bought an 86 Cherokee.
>
> Greg,
>
> Since your Jeep has a frame (i.e. it's not a unibody), you should be
> able to take it to a welding shop and have them weld on new floor pans
> for well under $200.
>
> Michael
>
'86 Cherokee with a 2.5L engine should be an XJ, in which case it kinda is
unibody, they called it "uniframe." The frame members are part of the body.
His rusty spots are pretty typical.
02-26-2007, 10:06 PM
#16
Guest
Posts: n/a
Re: Is it worth it?
<michael.white@charter.net> wrote in message
news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...
> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
>> I just bought an 86 Cherokee.
>
> Greg,
>
> Since your Jeep has a frame (i.e. it's not a unibody), you should be
> able to take it to a welding shop and have them weld on new floor pans
> for well under $200.
>
> Michael
>
'86 Cherokee with a 2.5L engine should be an XJ, in which case it kinda is
unibody, they called it "uniframe." The frame members are part of the body.
His rusty spots are pretty typical.
02-26-2007, 10:23 PM
#17
Guest
Posts: n/a
Re: Is it worth it?
On Feb 26, 9:06 pm, "Matt Macchiarolo" <m...@nospamplease.com> wrote:
> <michael.wh...@charter.net> wrote in message
>
> news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
> >> I just bought an 86 Cherokee.
>
> > Greg,
>
> > Since your Jeep has a frame (i.e. it's not a unibody), you should be
> > able to take it to a welding shop and have them weld on new floor pans
> > for well under $200.
>
> > Michael
>
> '86 Cherokee with a 2.5L engine should be an XJ, in which case it kinda is
> unibody, they called it "uniframe." The frame members are part of the body.
> His rusty spots are pretty typical.
Yes, Its not a frame like my YJ, its a u shaped thing with the body
attached to it. The whole underside is pretty much shot. Take what
parts I can and scrap the rest? It has a 2.5" old man emu lift. The
body is in real good shape, but the inderside is shot. What to do?
Greg
> <michael.wh...@charter.net> wrote in message
>
> news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
> >> I just bought an 86 Cherokee.
>
> > Greg,
>
> > Since your Jeep has a frame (i.e. it's not a unibody), you should be
> > able to take it to a welding shop and have them weld on new floor pans
> > for well under $200.
>
> > Michael
>
> '86 Cherokee with a 2.5L engine should be an XJ, in which case it kinda is
> unibody, they called it "uniframe." The frame members are part of the body.
> His rusty spots are pretty typical.
Yes, Its not a frame like my YJ, its a u shaped thing with the body
attached to it. The whole underside is pretty much shot. Take what
parts I can and scrap the rest? It has a 2.5" old man emu lift. The
body is in real good shape, but the inderside is shot. What to do?
Greg
02-26-2007, 10:23 PM
#18
Guest
Posts: n/a
Re: Is it worth it?
On Feb 26, 9:06 pm, "Matt Macchiarolo" <m...@nospamplease.com> wrote:
> <michael.wh...@charter.net> wrote in message
>
> news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
> >> I just bought an 86 Cherokee.
>
> > Greg,
>
> > Since your Jeep has a frame (i.e. it's not a unibody), you should be
> > able to take it to a welding shop and have them weld on new floor pans
> > for well under $200.
>
> > Michael
>
> '86 Cherokee with a 2.5L engine should be an XJ, in which case it kinda is
> unibody, they called it "uniframe." The frame members are part of the body.
> His rusty spots are pretty typical.
Yes, Its not a frame like my YJ, its a u shaped thing with the body
attached to it. The whole underside is pretty much shot. Take what
parts I can and scrap the rest? It has a 2.5" old man emu lift. The
body is in real good shape, but the inderside is shot. What to do?
Greg
> <michael.wh...@charter.net> wrote in message
>
> news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
> >> I just bought an 86 Cherokee.
>
> > Greg,
>
> > Since your Jeep has a frame (i.e. it's not a unibody), you should be
> > able to take it to a welding shop and have them weld on new floor pans
> > for well under $200.
>
> > Michael
>
> '86 Cherokee with a 2.5L engine should be an XJ, in which case it kinda is
> unibody, they called it "uniframe." The frame members are part of the body.
> His rusty spots are pretty typical.
Yes, Its not a frame like my YJ, its a u shaped thing with the body
attached to it. The whole underside is pretty much shot. Take what
parts I can and scrap the rest? It has a 2.5" old man emu lift. The
body is in real good shape, but the inderside is shot. What to do?
Greg
02-26-2007, 10:23 PM
#19
Guest
Posts: n/a
Re: Is it worth it?
On Feb 26, 9:06 pm, "Matt Macchiarolo" <m...@nospamplease.com> wrote:
> <michael.wh...@charter.net> wrote in message
>
> news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
> >> I just bought an 86 Cherokee.
>
> > Greg,
>
> > Since your Jeep has a frame (i.e. it's not a unibody), you should be
> > able to take it to a welding shop and have them weld on new floor pans
> > for well under $200.
>
> > Michael
>
> '86 Cherokee with a 2.5L engine should be an XJ, in which case it kinda is
> unibody, they called it "uniframe." The frame members are part of the body.
> His rusty spots are pretty typical.
Yes, Its not a frame like my YJ, its a u shaped thing with the body
attached to it. The whole underside is pretty much shot. Take what
parts I can and scrap the rest? It has a 2.5" old man emu lift. The
body is in real good shape, but the inderside is shot. What to do?
Greg
> <michael.wh...@charter.net> wrote in message
>
> news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...> On Feb 26, 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
> >> I just bought an 86 Cherokee.
>
> > Greg,
>
> > Since your Jeep has a frame (i.e. it's not a unibody), you should be
> > able to take it to a welding shop and have them weld on new floor pans
> > for well under $200.
>
> > Michael
>
> '86 Cherokee with a 2.5L engine should be an XJ, in which case it kinda is
> unibody, they called it "uniframe." The frame members are part of the body.
> His rusty spots are pretty typical.
Yes, Its not a frame like my YJ, its a u shaped thing with the body
attached to it. The whole underside is pretty much shot. Take what
parts I can and scrap the rest? It has a 2.5" old man emu lift. The
body is in real good shape, but the inderside is shot. What to do?
Greg
02-26-2007, 10:31 PM
#20
Guest
Posts: n/a
Re: Is it worth it?
Sell me the lift :-D
Carl
"jerryg" <Gregginn7@msn.com> wrote in message
news:1172546631.123059.60320@h3g2000cwc.googlegrou ps.com...
> On Feb 26, 9:06 pm, "Matt Macchiarolo" <m...@nospamplease.com> wrote:
>> <michael.wh...@charter.net> wrote in message
>>
>> news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...> On Feb 26,
>> 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
>> >> I just bought an 86 Cherokee.
>>
>> > Greg,
>>
>> > Since your Jeep has a frame (i.e. it's not a unibody), you should be
>> > able to take it to a welding shop and have them weld on new floor pans
>> > for well under $200.
>>
>> > Michael
>>
>> '86 Cherokee with a 2.5L engine should be an XJ, in which case it kinda
>> is
>> unibody, they called it "uniframe." The frame members are part of the
>> body.
>> His rusty spots are pretty typical.
>
> Yes, Its not a frame like my YJ, its a u shaped thing with the body
> attached to it. The whole underside is pretty much shot. Take what
> parts I can and scrap the rest? It has a 2.5" old man emu lift. The
> body is in real good shape, but the inderside is shot. What to do?
>
> Greg
>
Carl
"jerryg" <Gregginn7@msn.com> wrote in message
news:1172546631.123059.60320@h3g2000cwc.googlegrou ps.com...
> On Feb 26, 9:06 pm, "Matt Macchiarolo" <m...@nospamplease.com> wrote:
>> <michael.wh...@charter.net> wrote in message
>>
>> news:1172544825.952687.106190@k78g2000cwa.googlegr oups.com...> On Feb 26,
>> 7:44 pm, "jerryg" <Greggi...@msn.com> wrote:
>> >> I just bought an 86 Cherokee.
>>
>> > Greg,
>>
>> > Since your Jeep has a frame (i.e. it's not a unibody), you should be
>> > able to take it to a welding shop and have them weld on new floor pans
>> > for well under $200.
>>
>> > Michael
>>
>> '86 Cherokee with a 2.5L engine should be an XJ, in which case it kinda
>> is
>> unibody, they called it "uniframe." The frame members are part of the
>> body.
>> His rusty spots are pretty typical.
>
> Yes, Its not a frame like my YJ, its a u shaped thing with the body
> attached to it. The whole underside is pretty much shot. Take what
> parts I can and scrap the rest? It has a 2.5" old man emu lift. The
> body is in real good shape, but the inderside is shot. What to do?
>
> Greg
>
