Winch mounting plate layout - Anyone have one?
#21
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
Thanks Greg, every little bit will help!
"Greg" <greglc84@hotmail.com> wrote in message
news:8SdHi.183690$fJ5.26636@pd7urf1no...
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
"Greg" <greglc84@hotmail.com> wrote in message
news:8SdHi.183690$fJ5.26636@pd7urf1no...
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
#22
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
Kate wrote:
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
One thing on mine is the mounting bolts fit into a stock frame threaded
hole and one passed through the frame with a tube and washer setup so it
couldn't crush it.
Mine is a CJ7 though so the design wouldn't likely be the same, but
then... I could also snap off a photo and email it if it would help.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
One thing on mine is the mounting bolts fit into a stock frame threaded
hole and one passed through the frame with a tube and washer setup so it
couldn't crush it.
Mine is a CJ7 though so the design wouldn't likely be the same, but
then... I could also snap off a photo and email it if it would help.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
#23
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
Kate wrote:
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
One thing on mine is the mounting bolts fit into a stock frame threaded
hole and one passed through the frame with a tube and washer setup so it
couldn't crush it.
Mine is a CJ7 though so the design wouldn't likely be the same, but
then... I could also snap off a photo and email it if it would help.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
One thing on mine is the mounting bolts fit into a stock frame threaded
hole and one passed through the frame with a tube and washer setup so it
couldn't crush it.
Mine is a CJ7 though so the design wouldn't likely be the same, but
then... I could also snap off a photo and email it if it would help.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
#24
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
Kate wrote:
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
One thing on mine is the mounting bolts fit into a stock frame threaded
hole and one passed through the frame with a tube and washer setup so it
couldn't crush it.
Mine is a CJ7 though so the design wouldn't likely be the same, but
then... I could also snap off a photo and email it if it would help.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
One thing on mine is the mounting bolts fit into a stock frame threaded
hole and one passed through the frame with a tube and washer setup so it
couldn't crush it.
Mine is a CJ7 though so the design wouldn't likely be the same, but
then... I could also snap off a photo and email it if it would help.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
#25
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
Kate wrote:
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
One thing on mine is the mounting bolts fit into a stock frame threaded
hole and one passed through the frame with a tube and washer setup so it
couldn't crush it.
Mine is a CJ7 though so the design wouldn't likely be the same, but
then... I could also snap off a photo and email it if it would help.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
One thing on mine is the mounting bolts fit into a stock frame threaded
hole and one passed through the frame with a tube and washer setup so it
couldn't crush it.
Mine is a CJ7 though so the design wouldn't likely be the same, but
then... I could also snap off a photo and email it if it would help.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
#26
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
Way cool. congrats!
-jenn
On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:
>>What a happy day.
>>My Ex husband and his wife came to visit a few weeks ago. They took our
>>littlest Jeeper home for three weeks and he just brought him home last
>>night.
>>While they were here he told me that he had a Warn winch he would give me
>>for my Jeep. What a guy!
>>
>>Last night, the winch came with him. It's a
>>Warn M8000, complete. Only been used twice.
>>http://www.warn.com/truck/winches/src/M8000.shtml
>>
>>I've been looking at mounting plates and find that they are a bit pricey.
>>Since the hubster is a helluva fabricator I am hoping that someone has a
>>layout they would be willing to share so that we don't have to reinvent the
>>wheel (so to speak)
>>
>>Thanks in advance :ŹD
-jenn
On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:
>>What a happy day.
>>My Ex husband and his wife came to visit a few weeks ago. They took our
>>littlest Jeeper home for three weeks and he just brought him home last
>>night.
>>While they were here he told me that he had a Warn winch he would give me
>>for my Jeep. What a guy!
>>
>>Last night, the winch came with him. It's a
>>Warn M8000, complete. Only been used twice.
>>http://www.warn.com/truck/winches/src/M8000.shtml
>>
>>I've been looking at mounting plates and find that they are a bit pricey.
>>Since the hubster is a helluva fabricator I am hoping that someone has a
>>layout they would be willing to share so that we don't have to reinvent the
>>wheel (so to speak)
>>
>>Thanks in advance :ŹD
#27
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
Way cool. congrats!
-jenn
On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:
>>What a happy day.
>>My Ex husband and his wife came to visit a few weeks ago. They took our
>>littlest Jeeper home for three weeks and he just brought him home last
>>night.
>>While they were here he told me that he had a Warn winch he would give me
>>for my Jeep. What a guy!
>>
>>Last night, the winch came with him. It's a
>>Warn M8000, complete. Only been used twice.
>>http://www.warn.com/truck/winches/src/M8000.shtml
>>
>>I've been looking at mounting plates and find that they are a bit pricey.
>>Since the hubster is a helluva fabricator I am hoping that someone has a
>>layout they would be willing to share so that we don't have to reinvent the
>>wheel (so to speak)
>>
>>Thanks in advance :ŹD
-jenn
On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:
>>What a happy day.
>>My Ex husband and his wife came to visit a few weeks ago. They took our
>>littlest Jeeper home for three weeks and he just brought him home last
>>night.
>>While they were here he told me that he had a Warn winch he would give me
>>for my Jeep. What a guy!
>>
>>Last night, the winch came with him. It's a
>>Warn M8000, complete. Only been used twice.
>>http://www.warn.com/truck/winches/src/M8000.shtml
>>
>>I've been looking at mounting plates and find that they are a bit pricey.
>>Since the hubster is a helluva fabricator I am hoping that someone has a
>>layout they would be willing to share so that we don't have to reinvent the
>>wheel (so to speak)
>>
>>Thanks in advance :ŹD
#28
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
Way cool. congrats!
-jenn
On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:
>>What a happy day.
>>My Ex husband and his wife came to visit a few weeks ago. They took our
>>littlest Jeeper home for three weeks and he just brought him home last
>>night.
>>While they were here he told me that he had a Warn winch he would give me
>>for my Jeep. What a guy!
>>
>>Last night, the winch came with him. It's a
>>Warn M8000, complete. Only been used twice.
>>http://www.warn.com/truck/winches/src/M8000.shtml
>>
>>I've been looking at mounting plates and find that they are a bit pricey.
>>Since the hubster is a helluva fabricator I am hoping that someone has a
>>layout they would be willing to share so that we don't have to reinvent the
>>wheel (so to speak)
>>
>>Thanks in advance :ŹD
-jenn
On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:
>>What a happy day.
>>My Ex husband and his wife came to visit a few weeks ago. They took our
>>littlest Jeeper home for three weeks and he just brought him home last
>>night.
>>While they were here he told me that he had a Warn winch he would give me
>>for my Jeep. What a guy!
>>
>>Last night, the winch came with him. It's a
>>Warn M8000, complete. Only been used twice.
>>http://www.warn.com/truck/winches/src/M8000.shtml
>>
>>I've been looking at mounting plates and find that they are a bit pricey.
>>Since the hubster is a helluva fabricator I am hoping that someone has a
>>layout they would be willing to share so that we don't have to reinvent the
>>wheel (so to speak)
>>
>>Thanks in advance :ŹD
#29
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
Way cool. congrats!
-jenn
On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:
>>What a happy day.
>>My Ex husband and his wife came to visit a few weeks ago. They took our
>>littlest Jeeper home for three weeks and he just brought him home last
>>night.
>>While they were here he told me that he had a Warn winch he would give me
>>for my Jeep. What a guy!
>>
>>Last night, the winch came with him. It's a
>>Warn M8000, complete. Only been used twice.
>>http://www.warn.com/truck/winches/src/M8000.shtml
>>
>>I've been looking at mounting plates and find that they are a bit pricey.
>>Since the hubster is a helluva fabricator I am hoping that someone has a
>>layout they would be willing to share so that we don't have to reinvent the
>>wheel (so to speak)
>>
>>Thanks in advance :ŹD
-jenn
On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:
>>What a happy day.
>>My Ex husband and his wife came to visit a few weeks ago. They took our
>>littlest Jeeper home for three weeks and he just brought him home last
>>night.
>>While they were here he told me that he had a Warn winch he would give me
>>for my Jeep. What a guy!
>>
>>Last night, the winch came with him. It's a
>>Warn M8000, complete. Only been used twice.
>>http://www.warn.com/truck/winches/src/M8000.shtml
>>
>>I've been looking at mounting plates and find that they are a bit pricey.
>>Since the hubster is a helluva fabricator I am hoping that someone has a
>>layout they would be willing to share so that we don't have to reinvent the
>>wheel (so to speak)
>>
>>Thanks in advance :ŹD
#30
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
I made my own and wish I had spent the bucks for the OEM. They'll fit right
and be rated properly.