Winch mounting plate layout - Anyone have one?
09-16-2007, 12:49 PM
#11
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
I will try to find you a picture. The one I bought was 3/16" steel from
warn.
"Kate" <svtkate@spam.filter> wrote in message
news:GXcHi.60902$mp6.50721@bignews9.bellsouth.net. ..
> Thanks Carl.
> I'll go in to town tomorrow and see what I can find.
> Not much in the area for 4x4 shops, and the ONE that we have carries very
> little in stock.
>
> Kate
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com...
> Kate,
>
> If you go to a 4x4 shop and look at one, you'll understand. It sits on
> top of the frame rails on front of the grille, and bolts down to the
> frame.
> Center the winch on the place, mark the winche's holes, and drill. Bolt
> and
> be happy.
>
> Carl
>
>
> "Kate" <svtkate@spam.filter> wrote in message
> news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
>> What a happy day.
>> My Ex husband and his wife came to visit a few weeks ago. They took our
>> littlest Jeeper home for three weeks and he just brought him home last
>> night.
>> While they were here he told me that he had a Warn winch he would give me
>> for my Jeep. What a guy!
>>
>> Last night, the winch came with him. It's a
>> Warn M8000, complete. Only been used twice.
>> http://www.warn.com/truck/winches/src/M8000.shtml
>>
>> I've been looking at mounting plates and find that they are a bit pricey.
>> Since the hubster is a helluva fabricator I am hoping that someone has a
>> layout they would be willing to share so that we don't have to reinvent
>> the
>> wheel (so to speak)
>>
>> Thanks in advance :ŹD
>>
>> --
>> Kate
>> 2O|||||||O6 Rubicon
>> ______
>> /l ,[____],
>> l-L -OlllllllO-
>> ()_)-()_)--)_)
>>
>> The shortest distance between two points,
>> can be a lot more fun in a Jeep!
>>
>>
>
>
>
warn.
"Kate" <svtkate@spam.filter> wrote in message
news:GXcHi.60902$mp6.50721@bignews9.bellsouth.net. ..
> Thanks Carl.
> I'll go in to town tomorrow and see what I can find.
> Not much in the area for 4x4 shops, and the ONE that we have carries very
> little in stock.
>
> Kate
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com...
> Kate,
>
> If you go to a 4x4 shop and look at one, you'll understand. It sits on
> top of the frame rails on front of the grille, and bolts down to the
> frame.
> Center the winch on the place, mark the winche's holes, and drill. Bolt
> and
> be happy.
>
> Carl
>
>
> "Kate" <svtkate@spam.filter> wrote in message
> news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
>> What a happy day.
>> My Ex husband and his wife came to visit a few weeks ago. They took our
>> littlest Jeeper home for three weeks and he just brought him home last
>> night.
>> While they were here he told me that he had a Warn winch he would give me
>> for my Jeep. What a guy!
>>
>> Last night, the winch came with him. It's a
>> Warn M8000, complete. Only been used twice.
>> http://www.warn.com/truck/winches/src/M8000.shtml
>>
>> I've been looking at mounting plates and find that they are a bit pricey.
>> Since the hubster is a helluva fabricator I am hoping that someone has a
>> layout they would be willing to share so that we don't have to reinvent
>> the
>> wheel (so to speak)
>>
>> Thanks in advance :ŹD
>>
>> --
>> Kate
>> 2O|||||||O6 Rubicon
>> ______
>> /l ,[____],
>> l-L -OlllllllO-
>> ()_)-()_)--)_)
>>
>> The shortest distance between two points,
>> can be a lot more fun in a Jeep!
>>
>>
>
>
>
09-16-2007, 12:49 PM
#12
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
I will try to find you a picture. The one I bought was 3/16" steel from
warn.
"Kate" <svtkate@spam.filter> wrote in message
news:GXcHi.60902$mp6.50721@bignews9.bellsouth.net. ..
> Thanks Carl.
> I'll go in to town tomorrow and see what I can find.
> Not much in the area for 4x4 shops, and the ONE that we have carries very
> little in stock.
>
> Kate
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com...
> Kate,
>
> If you go to a 4x4 shop and look at one, you'll understand. It sits on
> top of the frame rails on front of the grille, and bolts down to the
> frame.
> Center the winch on the place, mark the winche's holes, and drill. Bolt
> and
> be happy.
>
> Carl
>
>
> "Kate" <svtkate@spam.filter> wrote in message
> news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
>> What a happy day.
>> My Ex husband and his wife came to visit a few weeks ago. They took our
>> littlest Jeeper home for three weeks and he just brought him home last
>> night.
>> While they were here he told me that he had a Warn winch he would give me
>> for my Jeep. What a guy!
>>
>> Last night, the winch came with him. It's a
>> Warn M8000, complete. Only been used twice.
>> http://www.warn.com/truck/winches/src/M8000.shtml
>>
>> I've been looking at mounting plates and find that they are a bit pricey.
>> Since the hubster is a helluva fabricator I am hoping that someone has a
>> layout they would be willing to share so that we don't have to reinvent
>> the
>> wheel (so to speak)
>>
>> Thanks in advance :ŹD
>>
>> --
>> Kate
>> 2O|||||||O6 Rubicon
>> ______
>> /l ,[____],
>> l-L -OlllllllO-
>> ()_)-()_)--)_)
>>
>> The shortest distance between two points,
>> can be a lot more fun in a Jeep!
>>
>>
>
>
>
warn.
"Kate" <svtkate@spam.filter> wrote in message
news:GXcHi.60902$mp6.50721@bignews9.bellsouth.net. ..
> Thanks Carl.
> I'll go in to town tomorrow and see what I can find.
> Not much in the area for 4x4 shops, and the ONE that we have carries very
> little in stock.
>
> Kate
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com...
> Kate,
>
> If you go to a 4x4 shop and look at one, you'll understand. It sits on
> top of the frame rails on front of the grille, and bolts down to the
> frame.
> Center the winch on the place, mark the winche's holes, and drill. Bolt
> and
> be happy.
>
> Carl
>
>
> "Kate" <svtkate@spam.filter> wrote in message
> news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
>> What a happy day.
>> My Ex husband and his wife came to visit a few weeks ago. They took our
>> littlest Jeeper home for three weeks and he just brought him home last
>> night.
>> While they were here he told me that he had a Warn winch he would give me
>> for my Jeep. What a guy!
>>
>> Last night, the winch came with him. It's a
>> Warn M8000, complete. Only been used twice.
>> http://www.warn.com/truck/winches/src/M8000.shtml
>>
>> I've been looking at mounting plates and find that they are a bit pricey.
>> Since the hubster is a helluva fabricator I am hoping that someone has a
>> layout they would be willing to share so that we don't have to reinvent
>> the
>> wheel (so to speak)
>>
>> Thanks in advance :ŹD
>>
>> --
>> Kate
>> 2O|||||||O6 Rubicon
>> ______
>> /l ,[____],
>> l-L -OlllllllO-
>> ()_)-()_)--)_)
>>
>> The shortest distance between two points,
>> can be a lot more fun in a Jeep!
>>
>>
>
>
>
09-16-2007, 12:49 PM
#13
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
I will try to find you a picture. The one I bought was 3/16" steel from
warn.
"Kate" <svtkate@spam.filter> wrote in message
news:GXcHi.60902$mp6.50721@bignews9.bellsouth.net. ..
> Thanks Carl.
> I'll go in to town tomorrow and see what I can find.
> Not much in the area for 4x4 shops, and the ONE that we have carries very
> little in stock.
>
> Kate
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com...
> Kate,
>
> If you go to a 4x4 shop and look at one, you'll understand. It sits on
> top of the frame rails on front of the grille, and bolts down to the
> frame.
> Center the winch on the place, mark the winche's holes, and drill. Bolt
> and
> be happy.
>
> Carl
>
>
> "Kate" <svtkate@spam.filter> wrote in message
> news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
>> What a happy day.
>> My Ex husband and his wife came to visit a few weeks ago. They took our
>> littlest Jeeper home for three weeks and he just brought him home last
>> night.
>> While they were here he told me that he had a Warn winch he would give me
>> for my Jeep. What a guy!
>>
>> Last night, the winch came with him. It's a
>> Warn M8000, complete. Only been used twice.
>> http://www.warn.com/truck/winches/src/M8000.shtml
>>
>> I've been looking at mounting plates and find that they are a bit pricey.
>> Since the hubster is a helluva fabricator I am hoping that someone has a
>> layout they would be willing to share so that we don't have to reinvent
>> the
>> wheel (so to speak)
>>
>> Thanks in advance :ŹD
>>
>> --
>> Kate
>> 2O|||||||O6 Rubicon
>> ______
>> /l ,[____],
>> l-L -OlllllllO-
>> ()_)-()_)--)_)
>>
>> The shortest distance between two points,
>> can be a lot more fun in a Jeep!
>>
>>
>
>
>
warn.
"Kate" <svtkate@spam.filter> wrote in message
news:GXcHi.60902$mp6.50721@bignews9.bellsouth.net. ..
> Thanks Carl.
> I'll go in to town tomorrow and see what I can find.
> Not much in the area for 4x4 shops, and the ONE that we have carries very
> little in stock.
>
> Kate
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com...
> Kate,
>
> If you go to a 4x4 shop and look at one, you'll understand. It sits on
> top of the frame rails on front of the grille, and bolts down to the
> frame.
> Center the winch on the place, mark the winche's holes, and drill. Bolt
> and
> be happy.
>
> Carl
>
>
> "Kate" <svtkate@spam.filter> wrote in message
> news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
>> What a happy day.
>> My Ex husband and his wife came to visit a few weeks ago. They took our
>> littlest Jeeper home for three weeks and he just brought him home last
>> night.
>> While they were here he told me that he had a Warn winch he would give me
>> for my Jeep. What a guy!
>>
>> Last night, the winch came with him. It's a
>> Warn M8000, complete. Only been used twice.
>> http://www.warn.com/truck/winches/src/M8000.shtml
>>
>> I've been looking at mounting plates and find that they are a bit pricey.
>> Since the hubster is a helluva fabricator I am hoping that someone has a
>> layout they would be willing to share so that we don't have to reinvent
>> the
>> wheel (so to speak)
>>
>> Thanks in advance :ŹD
>>
>> --
>> Kate
>> 2O|||||||O6 Rubicon
>> ______
>> /l ,[____],
>> l-L -OlllllllO-
>> ()_)-()_)--)_)
>>
>> The shortest distance between two points,
>> can be a lot more fun in a Jeep!
>>
>>
>
>
>
09-16-2007, 01:38 PM
#14
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
09-16-2007, 01:38 PM
#15
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
09-16-2007, 01:38 PM
#16
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
09-16-2007, 01:38 PM
#17
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
09-16-2007, 03:27 PM
#18
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
Thanks Greg, every little bit will help!
"Greg" <greglc84@hotmail.com> wrote in message
news:8SdHi.183690$fJ5.26636@pd7urf1no...
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
"Greg" <greglc84@hotmail.com> wrote in message
news:8SdHi.183690$fJ5.26636@pd7urf1no...
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
09-16-2007, 03:27 PM
#19
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
Thanks Greg, every little bit will help!
"Greg" <greglc84@hotmail.com> wrote in message
news:8SdHi.183690$fJ5.26636@pd7urf1no...
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
"Greg" <greglc84@hotmail.com> wrote in message
news:8SdHi.183690$fJ5.26636@pd7urf1no...
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
09-16-2007, 03:27 PM
#20
Guest
Posts: n/a
Re: Winch mounting plate layout - Anyone have one?
Thanks Greg, every little bit will help!
"Greg" <greglc84@hotmail.com> wrote in message
news:8SdHi.183690$fJ5.26636@pd7urf1no...
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
"Greg" <greglc84@hotmail.com> wrote in message
news:8SdHi.183690$fJ5.26636@pd7urf1no...
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg
"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :ŹD
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
