While we're slamming Dealerships....
#11
Guest
Posts: n/a
Re: While we're slamming Dealerships....
Bill,
You should take a trip and visit Michigan. We could rebuild your engine the
way you want, remove and replace it in my buddy's fully equipped shop and
have ya running and out the door for a lot less than that. Might cost you a
few boxes of barley sodas. but unfortunately it'd be tough to get your Jeep
here now since it's torn down..
Chris
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c6jr4t$crmsl$1@ID-193866.news.uni-berlin.de...
> Ya know Mike,
>
> I just need to move my @ss up by you cuz down here they don't even know
if
> they can get the blocks first off according to service. Labor, the guy's
> guessing but says he thinks about 1200.00 for remove and replace. Parts
> can't get a 4.2L block of any kind and says a 4.0L long block will be.....
>
>
> Hold on to your britches...
>
>
> 2283.00 plus 600.00 core charge.
>
>
>
> So let's see.
> 2283 + 600 + 1200 = $4083.00
>
>
> Oooooohhhh.......... Don't that feel good....
>
>
> Believe me, I've done some heavy leg work and this is the best I've found
> with the highest quality:
>
> R&R Engine 540.00
> Machine short block and add my 4.0L head, 1200.00
> Balance engine 125.00.
>
> Again, I could save the 540.00 if I could pull the engine but due to appt
> rules I cannot.
>
> This should last me until the next time which I should have a garage or
> local buds by then.
>
>
> Bill
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:408D6502.8F64E1F7@sympatico.ca...
> > William Oliveri wrote:
> > >
> > > I went to price a clutch kit from a local dealer today for my 83 CJ7.
> They
> > > came back with a quote of around 500.00
> > >
> > > What?????
> > >
> > > Comparitively, I got a price at a local parts store for 119.00. Heck
of
> a
> > > difference.
> > >
> > > Also, it pays to shop.
> > >
> > > I was quoting prices for R&R on my engine to have it machined. I had
> prices
> > > ranging from 540.00 (lowest) to 1800.00 (highest). I didn't even try
> the
> > > dealer on this.
> > >
> > > Amazing.
> >
> > You do know that the dealer sells short blocks for $1200.00 eh. That is
> > the price up here in Canada last time I checked. I could even get a
> > dealer long block 4.0 for $2500.00 installed with 1 year warranty on
> > everything including the install labor.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
>
>
You should take a trip and visit Michigan. We could rebuild your engine the
way you want, remove and replace it in my buddy's fully equipped shop and
have ya running and out the door for a lot less than that. Might cost you a
few boxes of barley sodas. but unfortunately it'd be tough to get your Jeep
here now since it's torn down..
Chris
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c6jr4t$crmsl$1@ID-193866.news.uni-berlin.de...
> Ya know Mike,
>
> I just need to move my @ss up by you cuz down here they don't even know
if
> they can get the blocks first off according to service. Labor, the guy's
> guessing but says he thinks about 1200.00 for remove and replace. Parts
> can't get a 4.2L block of any kind and says a 4.0L long block will be.....
>
>
> Hold on to your britches...
>
>
> 2283.00 plus 600.00 core charge.
>
>
>
> So let's see.
> 2283 + 600 + 1200 = $4083.00
>
>
> Oooooohhhh.......... Don't that feel good....
>
>
> Believe me, I've done some heavy leg work and this is the best I've found
> with the highest quality:
>
> R&R Engine 540.00
> Machine short block and add my 4.0L head, 1200.00
> Balance engine 125.00.
>
> Again, I could save the 540.00 if I could pull the engine but due to appt
> rules I cannot.
>
> This should last me until the next time which I should have a garage or
> local buds by then.
>
>
> Bill
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:408D6502.8F64E1F7@sympatico.ca...
> > William Oliveri wrote:
> > >
> > > I went to price a clutch kit from a local dealer today for my 83 CJ7.
> They
> > > came back with a quote of around 500.00
> > >
> > > What?????
> > >
> > > Comparitively, I got a price at a local parts store for 119.00. Heck
of
> a
> > > difference.
> > >
> > > Also, it pays to shop.
> > >
> > > I was quoting prices for R&R on my engine to have it machined. I had
> prices
> > > ranging from 540.00 (lowest) to 1800.00 (highest). I didn't even try
> the
> > > dealer on this.
> > >
> > > Amazing.
> >
> > You do know that the dealer sells short blocks for $1200.00 eh. That is
> > the price up here in Canada last time I checked. I could even get a
> > dealer long block 4.0 for $2500.00 installed with 1 year warranty on
> > everything including the install labor.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
>
>
#12
Guest
Posts: n/a
Re: While we're slamming Dealerships....
Bill,
You should take a trip and visit Michigan. We could rebuild your engine the
way you want, remove and replace it in my buddy's fully equipped shop and
have ya running and out the door for a lot less than that. Might cost you a
few boxes of barley sodas. but unfortunately it'd be tough to get your Jeep
here now since it's torn down..
Chris
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c6jr4t$crmsl$1@ID-193866.news.uni-berlin.de...
> Ya know Mike,
>
> I just need to move my @ss up by you cuz down here they don't even know
if
> they can get the blocks first off according to service. Labor, the guy's
> guessing but says he thinks about 1200.00 for remove and replace. Parts
> can't get a 4.2L block of any kind and says a 4.0L long block will be.....
>
>
> Hold on to your britches...
>
>
> 2283.00 plus 600.00 core charge.
>
>
>
> So let's see.
> 2283 + 600 + 1200 = $4083.00
>
>
> Oooooohhhh.......... Don't that feel good....
>
>
> Believe me, I've done some heavy leg work and this is the best I've found
> with the highest quality:
>
> R&R Engine 540.00
> Machine short block and add my 4.0L head, 1200.00
> Balance engine 125.00.
>
> Again, I could save the 540.00 if I could pull the engine but due to appt
> rules I cannot.
>
> This should last me until the next time which I should have a garage or
> local buds by then.
>
>
> Bill
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:408D6502.8F64E1F7@sympatico.ca...
> > William Oliveri wrote:
> > >
> > > I went to price a clutch kit from a local dealer today for my 83 CJ7.
> They
> > > came back with a quote of around 500.00
> > >
> > > What?????
> > >
> > > Comparitively, I got a price at a local parts store for 119.00. Heck
of
> a
> > > difference.
> > >
> > > Also, it pays to shop.
> > >
> > > I was quoting prices for R&R on my engine to have it machined. I had
> prices
> > > ranging from 540.00 (lowest) to 1800.00 (highest). I didn't even try
> the
> > > dealer on this.
> > >
> > > Amazing.
> >
> > You do know that the dealer sells short blocks for $1200.00 eh. That is
> > the price up here in Canada last time I checked. I could even get a
> > dealer long block 4.0 for $2500.00 installed with 1 year warranty on
> > everything including the install labor.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
>
>
You should take a trip and visit Michigan. We could rebuild your engine the
way you want, remove and replace it in my buddy's fully equipped shop and
have ya running and out the door for a lot less than that. Might cost you a
few boxes of barley sodas. but unfortunately it'd be tough to get your Jeep
here now since it's torn down..
Chris
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c6jr4t$crmsl$1@ID-193866.news.uni-berlin.de...
> Ya know Mike,
>
> I just need to move my @ss up by you cuz down here they don't even know
if
> they can get the blocks first off according to service. Labor, the guy's
> guessing but says he thinks about 1200.00 for remove and replace. Parts
> can't get a 4.2L block of any kind and says a 4.0L long block will be.....
>
>
> Hold on to your britches...
>
>
> 2283.00 plus 600.00 core charge.
>
>
>
> So let's see.
> 2283 + 600 + 1200 = $4083.00
>
>
> Oooooohhhh.......... Don't that feel good....
>
>
> Believe me, I've done some heavy leg work and this is the best I've found
> with the highest quality:
>
> R&R Engine 540.00
> Machine short block and add my 4.0L head, 1200.00
> Balance engine 125.00.
>
> Again, I could save the 540.00 if I could pull the engine but due to appt
> rules I cannot.
>
> This should last me until the next time which I should have a garage or
> local buds by then.
>
>
> Bill
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:408D6502.8F64E1F7@sympatico.ca...
> > William Oliveri wrote:
> > >
> > > I went to price a clutch kit from a local dealer today for my 83 CJ7.
> They
> > > came back with a quote of around 500.00
> > >
> > > What?????
> > >
> > > Comparitively, I got a price at a local parts store for 119.00. Heck
of
> a
> > > difference.
> > >
> > > Also, it pays to shop.
> > >
> > > I was quoting prices for R&R on my engine to have it machined. I had
> prices
> > > ranging from 540.00 (lowest) to 1800.00 (highest). I didn't even try
> the
> > > dealer on this.
> > >
> > > Amazing.
> >
> > You do know that the dealer sells short blocks for $1200.00 eh. That is
> > the price up here in Canada last time I checked. I could even get a
> > dealer long block 4.0 for $2500.00 installed with 1 year warranty on
> > everything including the install labor.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
>
>
#13
Guest
Posts: n/a
Re: While we're slamming Dealerships....
Bill,
You should take a trip and visit Michigan. We could rebuild your engine the
way you want, remove and replace it in my buddy's fully equipped shop and
have ya running and out the door for a lot less than that. Might cost you a
few boxes of barley sodas. but unfortunately it'd be tough to get your Jeep
here now since it's torn down..
Chris
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c6jr4t$crmsl$1@ID-193866.news.uni-berlin.de...
> Ya know Mike,
>
> I just need to move my @ss up by you cuz down here they don't even know
if
> they can get the blocks first off according to service. Labor, the guy's
> guessing but says he thinks about 1200.00 for remove and replace. Parts
> can't get a 4.2L block of any kind and says a 4.0L long block will be.....
>
>
> Hold on to your britches...
>
>
> 2283.00 plus 600.00 core charge.
>
>
>
> So let's see.
> 2283 + 600 + 1200 = $4083.00
>
>
> Oooooohhhh.......... Don't that feel good....
>
>
> Believe me, I've done some heavy leg work and this is the best I've found
> with the highest quality:
>
> R&R Engine 540.00
> Machine short block and add my 4.0L head, 1200.00
> Balance engine 125.00.
>
> Again, I could save the 540.00 if I could pull the engine but due to appt
> rules I cannot.
>
> This should last me until the next time which I should have a garage or
> local buds by then.
>
>
> Bill
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:408D6502.8F64E1F7@sympatico.ca...
> > William Oliveri wrote:
> > >
> > > I went to price a clutch kit from a local dealer today for my 83 CJ7.
> They
> > > came back with a quote of around 500.00
> > >
> > > What?????
> > >
> > > Comparitively, I got a price at a local parts store for 119.00. Heck
of
> a
> > > difference.
> > >
> > > Also, it pays to shop.
> > >
> > > I was quoting prices for R&R on my engine to have it machined. I had
> prices
> > > ranging from 540.00 (lowest) to 1800.00 (highest). I didn't even try
> the
> > > dealer on this.
> > >
> > > Amazing.
> >
> > You do know that the dealer sells short blocks for $1200.00 eh. That is
> > the price up here in Canada last time I checked. I could even get a
> > dealer long block 4.0 for $2500.00 installed with 1 year warranty on
> > everything including the install labor.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
>
>
You should take a trip and visit Michigan. We could rebuild your engine the
way you want, remove and replace it in my buddy's fully equipped shop and
have ya running and out the door for a lot less than that. Might cost you a
few boxes of barley sodas. but unfortunately it'd be tough to get your Jeep
here now since it's torn down..
Chris
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c6jr4t$crmsl$1@ID-193866.news.uni-berlin.de...
> Ya know Mike,
>
> I just need to move my @ss up by you cuz down here they don't even know
if
> they can get the blocks first off according to service. Labor, the guy's
> guessing but says he thinks about 1200.00 for remove and replace. Parts
> can't get a 4.2L block of any kind and says a 4.0L long block will be.....
>
>
> Hold on to your britches...
>
>
> 2283.00 plus 600.00 core charge.
>
>
>
> So let's see.
> 2283 + 600 + 1200 = $4083.00
>
>
> Oooooohhhh.......... Don't that feel good....
>
>
> Believe me, I've done some heavy leg work and this is the best I've found
> with the highest quality:
>
> R&R Engine 540.00
> Machine short block and add my 4.0L head, 1200.00
> Balance engine 125.00.
>
> Again, I could save the 540.00 if I could pull the engine but due to appt
> rules I cannot.
>
> This should last me until the next time which I should have a garage or
> local buds by then.
>
>
> Bill
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:408D6502.8F64E1F7@sympatico.ca...
> > William Oliveri wrote:
> > >
> > > I went to price a clutch kit from a local dealer today for my 83 CJ7.
> They
> > > came back with a quote of around 500.00
> > >
> > > What?????
> > >
> > > Comparitively, I got a price at a local parts store for 119.00. Heck
of
> a
> > > difference.
> > >
> > > Also, it pays to shop.
> > >
> > > I was quoting prices for R&R on my engine to have it machined. I had
> prices
> > > ranging from 540.00 (lowest) to 1800.00 (highest). I didn't even try
> the
> > > dealer on this.
> > >
> > > Amazing.
> >
> > You do know that the dealer sells short blocks for $1200.00 eh. That is
> > the price up here in Canada last time I checked. I could even get a
> > dealer long block 4.0 for $2500.00 installed with 1 year warranty on
> > everything including the install labor.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
>
>
#14
Guest
Posts: n/a
Re: While we're slamming Dealerships....
Chris,
I love Michigan. I used to work on Mackinac Island several summers and my
father worked there many more summers than I. I also lived down by Pontiac
in a town called Davisburg, close to Mt Holly and near Clarkston. Lots of
nice women there to :-)
Also, the UP is wonderful. Filled with State and National Parks.
Where are you at?
Well, as I mentioned to Mike, I did some heavy leg work in this area and
this price is the best I could get. I stuck without buds in this area and
no place to work :-(. I just came back from a visit to my home state
Florida and yes, there I would have access to friends who have both,
mechanical knowledge and a big place to work. Sometimes you just gotta bite
the bullet and do it.
Thanks,
Bill
"c" <c@me.org> wrote in message
news:JXjjc.45295$lS2.35261@twister.rdc-kc.rr.com...
> Bill,
>
> You should take a trip and visit Michigan. We could rebuild your engine
the
> way you want, remove and replace it in my buddy's fully equipped shop and
> have ya running and out the door for a lot less than that. Might cost you
a
> few boxes of barley sodas. but unfortunately it'd be tough to get your
Jeep
> here now since it's torn down..
>
> Chris
>
>
>
>
I love Michigan. I used to work on Mackinac Island several summers and my
father worked there many more summers than I. I also lived down by Pontiac
in a town called Davisburg, close to Mt Holly and near Clarkston. Lots of
nice women there to :-)
Also, the UP is wonderful. Filled with State and National Parks.
Where are you at?
Well, as I mentioned to Mike, I did some heavy leg work in this area and
this price is the best I could get. I stuck without buds in this area and
no place to work :-(. I just came back from a visit to my home state
Florida and yes, there I would have access to friends who have both,
mechanical knowledge and a big place to work. Sometimes you just gotta bite
the bullet and do it.
Thanks,
Bill
"c" <c@me.org> wrote in message
news:JXjjc.45295$lS2.35261@twister.rdc-kc.rr.com...
> Bill,
>
> You should take a trip and visit Michigan. We could rebuild your engine
the
> way you want, remove and replace it in my buddy's fully equipped shop and
> have ya running and out the door for a lot less than that. Might cost you
a
> few boxes of barley sodas. but unfortunately it'd be tough to get your
Jeep
> here now since it's torn down..
>
> Chris
>
>
>
>
#15
Guest
Posts: n/a
Re: While we're slamming Dealerships....
Chris,
I love Michigan. I used to work on Mackinac Island several summers and my
father worked there many more summers than I. I also lived down by Pontiac
in a town called Davisburg, close to Mt Holly and near Clarkston. Lots of
nice women there to :-)
Also, the UP is wonderful. Filled with State and National Parks.
Where are you at?
Well, as I mentioned to Mike, I did some heavy leg work in this area and
this price is the best I could get. I stuck without buds in this area and
no place to work :-(. I just came back from a visit to my home state
Florida and yes, there I would have access to friends who have both,
mechanical knowledge and a big place to work. Sometimes you just gotta bite
the bullet and do it.
Thanks,
Bill
"c" <c@me.org> wrote in message
news:JXjjc.45295$lS2.35261@twister.rdc-kc.rr.com...
> Bill,
>
> You should take a trip and visit Michigan. We could rebuild your engine
the
> way you want, remove and replace it in my buddy's fully equipped shop and
> have ya running and out the door for a lot less than that. Might cost you
a
> few boxes of barley sodas. but unfortunately it'd be tough to get your
Jeep
> here now since it's torn down..
>
> Chris
>
>
>
>
I love Michigan. I used to work on Mackinac Island several summers and my
father worked there many more summers than I. I also lived down by Pontiac
in a town called Davisburg, close to Mt Holly and near Clarkston. Lots of
nice women there to :-)
Also, the UP is wonderful. Filled with State and National Parks.
Where are you at?
Well, as I mentioned to Mike, I did some heavy leg work in this area and
this price is the best I could get. I stuck without buds in this area and
no place to work :-(. I just came back from a visit to my home state
Florida and yes, there I would have access to friends who have both,
mechanical knowledge and a big place to work. Sometimes you just gotta bite
the bullet and do it.
Thanks,
Bill
"c" <c@me.org> wrote in message
news:JXjjc.45295$lS2.35261@twister.rdc-kc.rr.com...
> Bill,
>
> You should take a trip and visit Michigan. We could rebuild your engine
the
> way you want, remove and replace it in my buddy's fully equipped shop and
> have ya running and out the door for a lot less than that. Might cost you
a
> few boxes of barley sodas. but unfortunately it'd be tough to get your
Jeep
> here now since it's torn down..
>
> Chris
>
>
>
>
#16
Guest
Posts: n/a
Re: While we're slamming Dealerships....
Chris,
I love Michigan. I used to work on Mackinac Island several summers and my
father worked there many more summers than I. I also lived down by Pontiac
in a town called Davisburg, close to Mt Holly and near Clarkston. Lots of
nice women there to :-)
Also, the UP is wonderful. Filled with State and National Parks.
Where are you at?
Well, as I mentioned to Mike, I did some heavy leg work in this area and
this price is the best I could get. I stuck without buds in this area and
no place to work :-(. I just came back from a visit to my home state
Florida and yes, there I would have access to friends who have both,
mechanical knowledge and a big place to work. Sometimes you just gotta bite
the bullet and do it.
Thanks,
Bill
"c" <c@me.org> wrote in message
news:JXjjc.45295$lS2.35261@twister.rdc-kc.rr.com...
> Bill,
>
> You should take a trip and visit Michigan. We could rebuild your engine
the
> way you want, remove and replace it in my buddy's fully equipped shop and
> have ya running and out the door for a lot less than that. Might cost you
a
> few boxes of barley sodas. but unfortunately it'd be tough to get your
Jeep
> here now since it's torn down..
>
> Chris
>
>
>
>
I love Michigan. I used to work on Mackinac Island several summers and my
father worked there many more summers than I. I also lived down by Pontiac
in a town called Davisburg, close to Mt Holly and near Clarkston. Lots of
nice women there to :-)
Also, the UP is wonderful. Filled with State and National Parks.
Where are you at?
Well, as I mentioned to Mike, I did some heavy leg work in this area and
this price is the best I could get. I stuck without buds in this area and
no place to work :-(. I just came back from a visit to my home state
Florida and yes, there I would have access to friends who have both,
mechanical knowledge and a big place to work. Sometimes you just gotta bite
the bullet and do it.
Thanks,
Bill
"c" <c@me.org> wrote in message
news:JXjjc.45295$lS2.35261@twister.rdc-kc.rr.com...
> Bill,
>
> You should take a trip and visit Michigan. We could rebuild your engine
the
> way you want, remove and replace it in my buddy's fully equipped shop and
> have ya running and out the door for a lot less than that. Might cost you
a
> few boxes of barley sodas. but unfortunately it'd be tough to get your
Jeep
> here now since it's torn down..
>
> Chris
>
>
>
>
#17
Guest
Posts: n/a
Re: While we're slamming Dealerships....
Chris,
I love Michigan. I used to work on Mackinac Island several summers and my
father worked there many more summers than I. I also lived down by Pontiac
in a town called Davisburg, close to Mt Holly and near Clarkston. Lots of
nice women there to :-)
Also, the UP is wonderful. Filled with State and National Parks.
Where are you at?
Well, as I mentioned to Mike, I did some heavy leg work in this area and
this price is the best I could get. I stuck without buds in this area and
no place to work :-(. I just came back from a visit to my home state
Florida and yes, there I would have access to friends who have both,
mechanical knowledge and a big place to work. Sometimes you just gotta bite
the bullet and do it.
Thanks,
Bill
"c" <c@me.org> wrote in message
news:JXjjc.45295$lS2.35261@twister.rdc-kc.rr.com...
> Bill,
>
> You should take a trip and visit Michigan. We could rebuild your engine
the
> way you want, remove and replace it in my buddy's fully equipped shop and
> have ya running and out the door for a lot less than that. Might cost you
a
> few boxes of barley sodas. but unfortunately it'd be tough to get your
Jeep
> here now since it's torn down..
>
> Chris
>
>
>
>
I love Michigan. I used to work on Mackinac Island several summers and my
father worked there many more summers than I. I also lived down by Pontiac
in a town called Davisburg, close to Mt Holly and near Clarkston. Lots of
nice women there to :-)
Also, the UP is wonderful. Filled with State and National Parks.
Where are you at?
Well, as I mentioned to Mike, I did some heavy leg work in this area and
this price is the best I could get. I stuck without buds in this area and
no place to work :-(. I just came back from a visit to my home state
Florida and yes, there I would have access to friends who have both,
mechanical knowledge and a big place to work. Sometimes you just gotta bite
the bullet and do it.
Thanks,
Bill
"c" <c@me.org> wrote in message
news:JXjjc.45295$lS2.35261@twister.rdc-kc.rr.com...
> Bill,
>
> You should take a trip and visit Michigan. We could rebuild your engine
the
> way you want, remove and replace it in my buddy's fully equipped shop and
> have ya running and out the door for a lot less than that. Might cost you
a
> few boxes of barley sodas. but unfortunately it'd be tough to get your
Jeep
> here now since it's torn down..
>
> Chris
>
>
>
>
#18
Guest
Posts: n/a
Re: While we're slamming Dealerships....
I'm in the UP, but just barely. Right on the Wisconsin border, so you've
definitely been in my area before.
Chris
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c6kjsl$ct4bl$1@ID-193866.news.uni-berlin.de...
> Chris,
>
> I love Michigan. I used to work on Mackinac Island several summers and my
> father worked there many more summers than I. I also lived down by
Pontiac
> in a town called Davisburg, close to Mt Holly and near Clarkston. Lots of
> nice women there to :-)
>
> Also, the UP is wonderful. Filled with State and National Parks.
>
> Where are you at?
>
> Well, as I mentioned to Mike, I did some heavy leg work in this area and
> this price is the best I could get. I stuck without buds in this area and
> no place to work :-(. I just came back from a visit to my home state
> Florida and yes, there I would have access to friends who have both,
> mechanical knowledge and a big place to work. Sometimes you just gotta
bite
> the bullet and do it.
>
>
> Thanks,
>
> Bill
>
>
>
>
>
> "c" <c@me.org> wrote in message
> news:JXjjc.45295$lS2.35261@twister.rdc-kc.rr.com...
> > Bill,
> >
> > You should take a trip and visit Michigan. We could rebuild your engine
> the
> > way you want, remove and replace it in my buddy's fully equipped shop
and
> > have ya running and out the door for a lot less than that. Might cost
you
> a
> > few boxes of barley sodas. but unfortunately it'd be tough to get your
> Jeep
> > here now since it's torn down..
> >
> > Chris
> >
> >
>
> >
> >
>
>
definitely been in my area before.
Chris
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c6kjsl$ct4bl$1@ID-193866.news.uni-berlin.de...
> Chris,
>
> I love Michigan. I used to work on Mackinac Island several summers and my
> father worked there many more summers than I. I also lived down by
Pontiac
> in a town called Davisburg, close to Mt Holly and near Clarkston. Lots of
> nice women there to :-)
>
> Also, the UP is wonderful. Filled with State and National Parks.
>
> Where are you at?
>
> Well, as I mentioned to Mike, I did some heavy leg work in this area and
> this price is the best I could get. I stuck without buds in this area and
> no place to work :-(. I just came back from a visit to my home state
> Florida and yes, there I would have access to friends who have both,
> mechanical knowledge and a big place to work. Sometimes you just gotta
bite
> the bullet and do it.
>
>
> Thanks,
>
> Bill
>
>
>
>
>
> "c" <c@me.org> wrote in message
> news:JXjjc.45295$lS2.35261@twister.rdc-kc.rr.com...
> > Bill,
> >
> > You should take a trip and visit Michigan. We could rebuild your engine
> the
> > way you want, remove and replace it in my buddy's fully equipped shop
and
> > have ya running and out the door for a lot less than that. Might cost
you
> a
> > few boxes of barley sodas. but unfortunately it'd be tough to get your
> Jeep
> > here now since it's torn down..
> >
> > Chris
> >
> >
>
> >
> >
>
>
#19
Guest
Posts: n/a
Re: While we're slamming Dealerships....
I'm in the UP, but just barely. Right on the Wisconsin border, so you've
definitely been in my area before.
Chris
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c6kjsl$ct4bl$1@ID-193866.news.uni-berlin.de...
> Chris,
>
> I love Michigan. I used to work on Mackinac Island several summers and my
> father worked there many more summers than I. I also lived down by
Pontiac
> in a town called Davisburg, close to Mt Holly and near Clarkston. Lots of
> nice women there to :-)
>
> Also, the UP is wonderful. Filled with State and National Parks.
>
> Where are you at?
>
> Well, as I mentioned to Mike, I did some heavy leg work in this area and
> this price is the best I could get. I stuck without buds in this area and
> no place to work :-(. I just came back from a visit to my home state
> Florida and yes, there I would have access to friends who have both,
> mechanical knowledge and a big place to work. Sometimes you just gotta
bite
> the bullet and do it.
>
>
> Thanks,
>
> Bill
>
>
>
>
>
> "c" <c@me.org> wrote in message
> news:JXjjc.45295$lS2.35261@twister.rdc-kc.rr.com...
> > Bill,
> >
> > You should take a trip and visit Michigan. We could rebuild your engine
> the
> > way you want, remove and replace it in my buddy's fully equipped shop
and
> > have ya running and out the door for a lot less than that. Might cost
you
> a
> > few boxes of barley sodas. but unfortunately it'd be tough to get your
> Jeep
> > here now since it's torn down..
> >
> > Chris
> >
> >
>
> >
> >
>
>
definitely been in my area before.
Chris
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c6kjsl$ct4bl$1@ID-193866.news.uni-berlin.de...
> Chris,
>
> I love Michigan. I used to work on Mackinac Island several summers and my
> father worked there many more summers than I. I also lived down by
Pontiac
> in a town called Davisburg, close to Mt Holly and near Clarkston. Lots of
> nice women there to :-)
>
> Also, the UP is wonderful. Filled with State and National Parks.
>
> Where are you at?
>
> Well, as I mentioned to Mike, I did some heavy leg work in this area and
> this price is the best I could get. I stuck without buds in this area and
> no place to work :-(. I just came back from a visit to my home state
> Florida and yes, there I would have access to friends who have both,
> mechanical knowledge and a big place to work. Sometimes you just gotta
bite
> the bullet and do it.
>
>
> Thanks,
>
> Bill
>
>
>
>
>
> "c" <c@me.org> wrote in message
> news:JXjjc.45295$lS2.35261@twister.rdc-kc.rr.com...
> > Bill,
> >
> > You should take a trip and visit Michigan. We could rebuild your engine
> the
> > way you want, remove and replace it in my buddy's fully equipped shop
and
> > have ya running and out the door for a lot less than that. Might cost
you
> a
> > few boxes of barley sodas. but unfortunately it'd be tough to get your
> Jeep
> > here now since it's torn down..
> >
> > Chris
> >
> >
>
> >
> >
>
>
#20
Guest
Posts: n/a
Re: While we're slamming Dealerships....
I'm in the UP, but just barely. Right on the Wisconsin border, so you've
definitely been in my area before.
Chris
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c6kjsl$ct4bl$1@ID-193866.news.uni-berlin.de...
> Chris,
>
> I love Michigan. I used to work on Mackinac Island several summers and my
> father worked there many more summers than I. I also lived down by
Pontiac
> in a town called Davisburg, close to Mt Holly and near Clarkston. Lots of
> nice women there to :-)
>
> Also, the UP is wonderful. Filled with State and National Parks.
>
> Where are you at?
>
> Well, as I mentioned to Mike, I did some heavy leg work in this area and
> this price is the best I could get. I stuck without buds in this area and
> no place to work :-(. I just came back from a visit to my home state
> Florida and yes, there I would have access to friends who have both,
> mechanical knowledge and a big place to work. Sometimes you just gotta
bite
> the bullet and do it.
>
>
> Thanks,
>
> Bill
>
>
>
>
>
> "c" <c@me.org> wrote in message
> news:JXjjc.45295$lS2.35261@twister.rdc-kc.rr.com...
> > Bill,
> >
> > You should take a trip and visit Michigan. We could rebuild your engine
> the
> > way you want, remove and replace it in my buddy's fully equipped shop
and
> > have ya running and out the door for a lot less than that. Might cost
you
> a
> > few boxes of barley sodas. but unfortunately it'd be tough to get your
> Jeep
> > here now since it's torn down..
> >
> > Chris
> >
> >
>
> >
> >
>
>
definitely been in my area before.
Chris
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c6kjsl$ct4bl$1@ID-193866.news.uni-berlin.de...
> Chris,
>
> I love Michigan. I used to work on Mackinac Island several summers and my
> father worked there many more summers than I. I also lived down by
Pontiac
> in a town called Davisburg, close to Mt Holly and near Clarkston. Lots of
> nice women there to :-)
>
> Also, the UP is wonderful. Filled with State and National Parks.
>
> Where are you at?
>
> Well, as I mentioned to Mike, I did some heavy leg work in this area and
> this price is the best I could get. I stuck without buds in this area and
> no place to work :-(. I just came back from a visit to my home state
> Florida and yes, there I would have access to friends who have both,
> mechanical knowledge and a big place to work. Sometimes you just gotta
bite
> the bullet and do it.
>
>
> Thanks,
>
> Bill
>
>
>
>
>
> "c" <c@me.org> wrote in message
> news:JXjjc.45295$lS2.35261@twister.rdc-kc.rr.com...
> > Bill,
> >
> > You should take a trip and visit Michigan. We could rebuild your engine
> the
> > way you want, remove and replace it in my buddy's fully equipped shop
and
> > have ya running and out the door for a lot less than that. Might cost
you
> a
> > few boxes of barley sodas. but unfortunately it'd be tough to get your
> Jeep
> > here now since it's torn down..
> >
> > Chris
> >
> >
>
> >
> >
>
>