Where do the wires come out?
07-06-2007, 08:02 PM
#41
Guest
Posts: n/a
Re: Where do the wires come out?
It's the "roll bar" that's against the NHRA rule book to have an open
hole.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:468e519d$0$8538$9a6e19ea@unlimited.newshostin g.com...
>
> I don't think they are 'allowed' to run wires through the sport bar for
> structural integrity. I don't think holes are allowed. I could be
> mistaken but...
>
> Note the hole for the seat belt is a welded tube with the bolt going
> through that.
>
> If I remember right, the ones I have seen were run under the padding.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
--
Posted via a free Usenet account from http://www.teranews.com
hole.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:468e519d$0$8538$9a6e19ea@unlimited.newshostin g.com...
>
> I don't think they are 'allowed' to run wires through the sport bar for
> structural integrity. I don't think holes are allowed. I could be
> mistaken but...
>
> Note the hole for the seat belt is a welded tube with the bolt going
> through that.
>
> If I remember right, the ones I have seen were run under the padding.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
--
Posted via a free Usenet account from http://www.teranews.com
07-07-2007, 07:40 PM
#42
Guest
Posts: n/a
Re: Where do the wires come out?
On Tue, 03 Jul 2007 22:26:33 -0400, Scott in Baltimore
<sDcOoNtTtS_PuAnMiMtE_69@yahoo.com> wrote:
>I found the rectangular plugs on the upper corners of the rollbar.
>Where do the wires to the soundbar come out? Where is the lower plug?
I was out messing with mine today taking the carpet out of it. Try
looking on the passenger side, about 6" up from the floor, just about
the seatbelt mechanism on the outboard side of the verticle bar.
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
<sDcOoNtTtS_PuAnMiMtE_69@yahoo.com> wrote:
>I found the rectangular plugs on the upper corners of the rollbar.
>Where do the wires to the soundbar come out? Where is the lower plug?
I was out messing with mine today taking the carpet out of it. Try
looking on the passenger side, about 6" up from the floor, just about
the seatbelt mechanism on the outboard side of the verticle bar.
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
07-07-2007, 07:40 PM
#43
Guest
Posts: n/a
Re: Where do the wires come out?
On Tue, 03 Jul 2007 22:26:33 -0400, Scott in Baltimore
<sDcOoNtTtS_PuAnMiMtE_69@yahoo.com> wrote:
>I found the rectangular plugs on the upper corners of the rollbar.
>Where do the wires to the soundbar come out? Where is the lower plug?
I was out messing with mine today taking the carpet out of it. Try
looking on the passenger side, about 6" up from the floor, just about
the seatbelt mechanism on the outboard side of the verticle bar.
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
<sDcOoNtTtS_PuAnMiMtE_69@yahoo.com> wrote:
>I found the rectangular plugs on the upper corners of the rollbar.
>Where do the wires to the soundbar come out? Where is the lower plug?
I was out messing with mine today taking the carpet out of it. Try
looking on the passenger side, about 6" up from the floor, just about
the seatbelt mechanism on the outboard side of the verticle bar.
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
07-07-2007, 07:40 PM
#44
Guest
Posts: n/a
Re: Where do the wires come out?
On Tue, 03 Jul 2007 22:26:33 -0400, Scott in Baltimore
<sDcOoNtTtS_PuAnMiMtE_69@yahoo.com> wrote:
>I found the rectangular plugs on the upper corners of the rollbar.
>Where do the wires to the soundbar come out? Where is the lower plug?
I was out messing with mine today taking the carpet out of it. Try
looking on the passenger side, about 6" up from the floor, just about
the seatbelt mechanism on the outboard side of the verticle bar.
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
<sDcOoNtTtS_PuAnMiMtE_69@yahoo.com> wrote:
>I found the rectangular plugs on the upper corners of the rollbar.
>Where do the wires to the soundbar come out? Where is the lower plug?
I was out messing with mine today taking the carpet out of it. Try
looking on the passenger side, about 6" up from the floor, just about
the seatbelt mechanism on the outboard side of the verticle bar.
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
07-07-2007, 07:40 PM
#45
Guest
Posts: n/a
Re: Where do the wires come out?
On Tue, 03 Jul 2007 22:26:33 -0400, Scott in Baltimore
<sDcOoNtTtS_PuAnMiMtE_69@yahoo.com> wrote:
>I found the rectangular plugs on the upper corners of the rollbar.
>Where do the wires to the soundbar come out? Where is the lower plug?
I was out messing with mine today taking the carpet out of it. Try
looking on the passenger side, about 6" up from the floor, just about
the seatbelt mechanism on the outboard side of the verticle bar.
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
<sDcOoNtTtS_PuAnMiMtE_69@yahoo.com> wrote:
>I found the rectangular plugs on the upper corners of the rollbar.
>Where do the wires to the soundbar come out? Where is the lower plug?
I was out messing with mine today taking the carpet out of it. Try
looking on the passenger side, about 6" up from the floor, just about
the seatbelt mechanism on the outboard side of the verticle bar.
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
07-08-2007, 03:33 AM
#46
Guest
Posts: n/a
Re: Where do the wires come out?
Chrysler started calling the roll bar a "sport bar" some time in
the late 80's or early 90's. One person at the local dealership
explaned the change to me as CYA lawyer-speak in case the bar
failed in a rollover or collision. The firewall became the
bulkhead, too.
/herb
In article <468ecd02$0$16328$88260bb3@free.teranews.com>,
L.W. \(Bill\) ------ III <LWBill------@------.net> wrote:
# It's the "roll bar" that's against the NHRA rule book to have an open
#hole.
# God Bless America, Bill O|||||||O
#mailto:-------------------- http://www.----------.com/
#
#
#"Mike Romain" <romainm@sympatico.ca> wrote in message
#news:468e519d$0$8538$9a6e19ea@unlimited.newshosti ng.com...
#>
#> I don't think they are 'allowed' to run wires through the sport bar for
#> structural integrity. I don't think holes are allowed. I could be
#> mistaken but...
#>
#> Note the hole for the seat belt is a welded tube with the bolt going
#> through that.
#>
#> If I remember right, the ones I have seen were run under the padding.
#>
#> Mike
#> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
#> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
#> Canadian Off Road Trips Photos: Non members can still view!
#> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
#> (More Off Road album links at bottom of the view page)
#
#
#
#--
#Posted via a free Usenet account from http://www.teranews.com
#
07-08-2007, 03:33 AM
#47
Guest
Posts: n/a
Re: Where do the wires come out?
Chrysler started calling the roll bar a "sport bar" some time in
the late 80's or early 90's. One person at the local dealership
explaned the change to me as CYA lawyer-speak in case the bar
failed in a rollover or collision. The firewall became the
bulkhead, too.
/herb
In article <468ecd02$0$16328$88260bb3@free.teranews.com>,
L.W. \(Bill\) ------ III <LWBill------@------.net> wrote:
# It's the "roll bar" that's against the NHRA rule book to have an open
#hole.
# God Bless America, Bill O|||||||O
#mailto:-------------------- http://www.----------.com/
#
#
#"Mike Romain" <romainm@sympatico.ca> wrote in message
#news:468e519d$0$8538$9a6e19ea@unlimited.newshosti ng.com...
#>
#> I don't think they are 'allowed' to run wires through the sport bar for
#> structural integrity. I don't think holes are allowed. I could be
#> mistaken but...
#>
#> Note the hole for the seat belt is a welded tube with the bolt going
#> through that.
#>
#> If I remember right, the ones I have seen were run under the padding.
#>
#> Mike
#> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
#> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
#> Canadian Off Road Trips Photos: Non members can still view!
#> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
#> (More Off Road album links at bottom of the view page)
#
#
#
#--
#Posted via a free Usenet account from http://www.teranews.com
#
07-08-2007, 03:33 AM
#48
Guest
Posts: n/a
Re: Where do the wires come out?
Chrysler started calling the roll bar a "sport bar" some time in
the late 80's or early 90's. One person at the local dealership
explaned the change to me as CYA lawyer-speak in case the bar
failed in a rollover or collision. The firewall became the
bulkhead, too.
/herb
In article <468ecd02$0$16328$88260bb3@free.teranews.com>,
L.W. \(Bill\) ------ III <LWBill------@------.net> wrote:
# It's the "roll bar" that's against the NHRA rule book to have an open
#hole.
# God Bless America, Bill O|||||||O
#mailto:-------------------- http://www.----------.com/
#
#
#"Mike Romain" <romainm@sympatico.ca> wrote in message
#news:468e519d$0$8538$9a6e19ea@unlimited.newshosti ng.com...
#>
#> I don't think they are 'allowed' to run wires through the sport bar for
#> structural integrity. I don't think holes are allowed. I could be
#> mistaken but...
#>
#> Note the hole for the seat belt is a welded tube with the bolt going
#> through that.
#>
#> If I remember right, the ones I have seen were run under the padding.
#>
#> Mike
#> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
#> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
#> Canadian Off Road Trips Photos: Non members can still view!
#> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
#> (More Off Road album links at bottom of the view page)
#
#
#
#--
#Posted via a free Usenet account from http://www.teranews.com
#
07-08-2007, 03:33 AM
#49
Guest
Posts: n/a
Re: Where do the wires come out?
Chrysler started calling the roll bar a "sport bar" some time in
the late 80's or early 90's. One person at the local dealership
explaned the change to me as CYA lawyer-speak in case the bar
failed in a rollover or collision. The firewall became the
bulkhead, too.
/herb
In article <468ecd02$0$16328$88260bb3@free.teranews.com>,
L.W. \(Bill\) ------ III <LWBill------@------.net> wrote:
# It's the "roll bar" that's against the NHRA rule book to have an open
#hole.
# God Bless America, Bill O|||||||O
#mailto:-------------------- http://www.----------.com/
#
#
#"Mike Romain" <romainm@sympatico.ca> wrote in message
#news:468e519d$0$8538$9a6e19ea@unlimited.newshosti ng.com...
#>
#> I don't think they are 'allowed' to run wires through the sport bar for
#> structural integrity. I don't think holes are allowed. I could be
#> mistaken but...
#>
#> Note the hole for the seat belt is a welded tube with the bolt going
#> through that.
#>
#> If I remember right, the ones I have seen were run under the padding.
#>
#> Mike
#> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
#> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
#> Canadian Off Road Trips Photos: Non members can still view!
#> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
#> (More Off Road album links at bottom of the view page)
#
#
#
#--
#Posted via a free Usenet account from http://www.teranews.com
#
07-08-2007, 03:41 AM
#50
Guest
Posts: n/a
Re: Where do the wires come out?
And I thought a "bulkhead" was on a boat. Thanks Herb.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Herb Leong" <herb@urusei.net> wrote in message
news:HMKdnQbARNKoDg3bnZ2dnUVZ_jGdnZ2d@speakeasy.ne t...
>
> Chrysler started calling the roll bar a "sport bar" some time in
> the late 80's or early 90's. One person at the local dealership
> explaned the change to me as CYA lawyer-speak in case the bar
> failed in a rollover or collision. The firewall became the
> bulkhead, too.
>
> /herb
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Herb Leong" <herb@urusei.net> wrote in message
news:HMKdnQbARNKoDg3bnZ2dnUVZ_jGdnZ2d@speakeasy.ne t...
>
> Chrysler started calling the roll bar a "sport bar" some time in
> the late 80's or early 90's. One person at the local dealership
> explaned the change to me as CYA lawyer-speak in case the bar
> failed in a rollover or collision. The firewall became the
> bulkhead, too.
>
> /herb
--
Posted via a free Usenet account from http://www.teranews.com