Where do the wires come out?
07-06-2007, 12:39 PM
#31
Guest
Posts: n/a
Re: Where do the wires come out?
>> I found the rectangular plugs on the upper corners of the rollbar.
>> Where do the wires to the soundbar come out? Where is the lower plug?
>
> I don't think they are 'allowed' to run wires through the sport bar for
> structural integrity. I don't think holes are allowed. I could be
> mistaken but...
>
> Note the hole for the seat belt is a welded tube with the bolt going
> through that.
>
> If I remember right, the ones I have seen were run under the padding.
OK. I didn't want to pay $500 for an AM/FM radio in 1997 so I got it blank.
I have no padding over the sport bar. I wonder what those rectangular holes
were for? They are on the back side near the bend on the top straight part
of the tube. Yes, the bolts are run through tubes for the seat belts. I'll
just do the wire loom thing to connect the consoles together. I'll try to
take pictures and post them so others can get ideas for securing and mounting
ham/cb/scanner/audio equipment.
-Scott
'97 TJ SE
>> Where do the wires to the soundbar come out? Where is the lower plug?
>
> I don't think they are 'allowed' to run wires through the sport bar for
> structural integrity. I don't think holes are allowed. I could be
> mistaken but...
>
> Note the hole for the seat belt is a welded tube with the bolt going
> through that.
>
> If I remember right, the ones I have seen were run under the padding.
OK. I didn't want to pay $500 for an AM/FM radio in 1997 so I got it blank.
I have no padding over the sport bar. I wonder what those rectangular holes
were for? They are on the back side near the bend on the top straight part
of the tube. Yes, the bolts are run through tubes for the seat belts. I'll
just do the wire loom thing to connect the consoles together. I'll try to
take pictures and post them so others can get ideas for securing and mounting
ham/cb/scanner/audio equipment.
-Scott
'97 TJ SE
07-06-2007, 12:39 PM
#32
Guest
Posts: n/a
Re: Where do the wires come out?
>> I found the rectangular plugs on the upper corners of the rollbar.
>> Where do the wires to the soundbar come out? Where is the lower plug?
>
> I don't think they are 'allowed' to run wires through the sport bar for
> structural integrity. I don't think holes are allowed. I could be
> mistaken but...
>
> Note the hole for the seat belt is a welded tube with the bolt going
> through that.
>
> If I remember right, the ones I have seen were run under the padding.
OK. I didn't want to pay $500 for an AM/FM radio in 1997 so I got it blank.
I have no padding over the sport bar. I wonder what those rectangular holes
were for? They are on the back side near the bend on the top straight part
of the tube. Yes, the bolts are run through tubes for the seat belts. I'll
just do the wire loom thing to connect the consoles together. I'll try to
take pictures and post them so others can get ideas for securing and mounting
ham/cb/scanner/audio equipment.
-Scott
'97 TJ SE
>> Where do the wires to the soundbar come out? Where is the lower plug?
>
> I don't think they are 'allowed' to run wires through the sport bar for
> structural integrity. I don't think holes are allowed. I could be
> mistaken but...
>
> Note the hole for the seat belt is a welded tube with the bolt going
> through that.
>
> If I remember right, the ones I have seen were run under the padding.
OK. I didn't want to pay $500 for an AM/FM radio in 1997 so I got it blank.
I have no padding over the sport bar. I wonder what those rectangular holes
were for? They are on the back side near the bend on the top straight part
of the tube. Yes, the bolts are run through tubes for the seat belts. I'll
just do the wire loom thing to connect the consoles together. I'll try to
take pictures and post them so others can get ideas for securing and mounting
ham/cb/scanner/audio equipment.
-Scott
'97 TJ SE
07-06-2007, 12:39 PM
#33
Guest
Posts: n/a
Re: Where do the wires come out?
>> I found the rectangular plugs on the upper corners of the rollbar.
>> Where do the wires to the soundbar come out? Where is the lower plug?
>
> I don't think they are 'allowed' to run wires through the sport bar for
> structural integrity. I don't think holes are allowed. I could be
> mistaken but...
>
> Note the hole for the seat belt is a welded tube with the bolt going
> through that.
>
> If I remember right, the ones I have seen were run under the padding.
OK. I didn't want to pay $500 for an AM/FM radio in 1997 so I got it blank.
I have no padding over the sport bar. I wonder what those rectangular holes
were for? They are on the back side near the bend on the top straight part
of the tube. Yes, the bolts are run through tubes for the seat belts. I'll
just do the wire loom thing to connect the consoles together. I'll try to
take pictures and post them so others can get ideas for securing and mounting
ham/cb/scanner/audio equipment.
-Scott
'97 TJ SE
>> Where do the wires to the soundbar come out? Where is the lower plug?
>
> I don't think they are 'allowed' to run wires through the sport bar for
> structural integrity. I don't think holes are allowed. I could be
> mistaken but...
>
> Note the hole for the seat belt is a welded tube with the bolt going
> through that.
>
> If I remember right, the ones I have seen were run under the padding.
OK. I didn't want to pay $500 for an AM/FM radio in 1997 so I got it blank.
I have no padding over the sport bar. I wonder what those rectangular holes
were for? They are on the back side near the bend on the top straight part
of the tube. Yes, the bolts are run through tubes for the seat belts. I'll
just do the wire loom thing to connect the consoles together. I'll try to
take pictures and post them so others can get ideas for securing and mounting
ham/cb/scanner/audio equipment.
-Scott
'97 TJ SE
07-06-2007, 12:48 PM
#34
Guest
Posts: n/a
Re: Where do the wires come out?
Scott in Baltimore wrote:
>>> I found the rectangular plugs on the upper corners of the rollbar.
>>> Where do the wires to the soundbar come out? Where is the lower plug?
>>
>> I don't think they are 'allowed' to run wires through the sport bar
>> for structural integrity. I don't think holes are allowed. I could
>> be mistaken but...
>>
>> Note the hole for the seat belt is a welded tube with the bolt going
>> through that.
>>
>> If I remember right, the ones I have seen were run under the padding.
>
> OK. I didn't want to pay $500 for an AM/FM radio in 1997 so I got it blank.
> I have no padding over the sport bar. I wonder what those rectangular holes
> were for? They are on the back side near the bend on the top straight part
> of the tube. Yes, the bolts are run through tubes for the seat belts. I'll
> just do the wire loom thing to connect the consoles together. I'll try to
> take pictures and post them so others can get ideas for securing and
> mounting
> ham/cb/scanner/audio equipment.
>
> -Scott
> '97 TJ SE
I think that might be the back side of the mount for the sport bar
section that runs to the windshield. That bar section is removable for
when you want to drive with the windshield folded down.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
>>> I found the rectangular plugs on the upper corners of the rollbar.
>>> Where do the wires to the soundbar come out? Where is the lower plug?
>>
>> I don't think they are 'allowed' to run wires through the sport bar
>> for structural integrity. I don't think holes are allowed. I could
>> be mistaken but...
>>
>> Note the hole for the seat belt is a welded tube with the bolt going
>> through that.
>>
>> If I remember right, the ones I have seen were run under the padding.
>
> OK. I didn't want to pay $500 for an AM/FM radio in 1997 so I got it blank.
> I have no padding over the sport bar. I wonder what those rectangular holes
> were for? They are on the back side near the bend on the top straight part
> of the tube. Yes, the bolts are run through tubes for the seat belts. I'll
> just do the wire loom thing to connect the consoles together. I'll try to
> take pictures and post them so others can get ideas for securing and
> mounting
> ham/cb/scanner/audio equipment.
>
> -Scott
> '97 TJ SE
I think that might be the back side of the mount for the sport bar
section that runs to the windshield. That bar section is removable for
when you want to drive with the windshield folded down.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
07-06-2007, 12:48 PM
#35
Guest
Posts: n/a
Re: Where do the wires come out?
Scott in Baltimore wrote:
>>> I found the rectangular plugs on the upper corners of the rollbar.
>>> Where do the wires to the soundbar come out? Where is the lower plug?
>>
>> I don't think they are 'allowed' to run wires through the sport bar
>> for structural integrity. I don't think holes are allowed. I could
>> be mistaken but...
>>
>> Note the hole for the seat belt is a welded tube with the bolt going
>> through that.
>>
>> If I remember right, the ones I have seen were run under the padding.
>
> OK. I didn't want to pay $500 for an AM/FM radio in 1997 so I got it blank.
> I have no padding over the sport bar. I wonder what those rectangular holes
> were for? They are on the back side near the bend on the top straight part
> of the tube. Yes, the bolts are run through tubes for the seat belts. I'll
> just do the wire loom thing to connect the consoles together. I'll try to
> take pictures and post them so others can get ideas for securing and
> mounting
> ham/cb/scanner/audio equipment.
>
> -Scott
> '97 TJ SE
I think that might be the back side of the mount for the sport bar
section that runs to the windshield. That bar section is removable for
when you want to drive with the windshield folded down.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
>>> I found the rectangular plugs on the upper corners of the rollbar.
>>> Where do the wires to the soundbar come out? Where is the lower plug?
>>
>> I don't think they are 'allowed' to run wires through the sport bar
>> for structural integrity. I don't think holes are allowed. I could
>> be mistaken but...
>>
>> Note the hole for the seat belt is a welded tube with the bolt going
>> through that.
>>
>> If I remember right, the ones I have seen were run under the padding.
>
> OK. I didn't want to pay $500 for an AM/FM radio in 1997 so I got it blank.
> I have no padding over the sport bar. I wonder what those rectangular holes
> were for? They are on the back side near the bend on the top straight part
> of the tube. Yes, the bolts are run through tubes for the seat belts. I'll
> just do the wire loom thing to connect the consoles together. I'll try to
> take pictures and post them so others can get ideas for securing and
> mounting
> ham/cb/scanner/audio equipment.
>
> -Scott
> '97 TJ SE
I think that might be the back side of the mount for the sport bar
section that runs to the windshield. That bar section is removable for
when you want to drive with the windshield folded down.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
07-06-2007, 12:48 PM
#36
Guest
Posts: n/a
Re: Where do the wires come out?
Scott in Baltimore wrote:
>>> I found the rectangular plugs on the upper corners of the rollbar.
>>> Where do the wires to the soundbar come out? Where is the lower plug?
>>
>> I don't think they are 'allowed' to run wires through the sport bar
>> for structural integrity. I don't think holes are allowed. I could
>> be mistaken but...
>>
>> Note the hole for the seat belt is a welded tube with the bolt going
>> through that.
>>
>> If I remember right, the ones I have seen were run under the padding.
>
> OK. I didn't want to pay $500 for an AM/FM radio in 1997 so I got it blank.
> I have no padding over the sport bar. I wonder what those rectangular holes
> were for? They are on the back side near the bend on the top straight part
> of the tube. Yes, the bolts are run through tubes for the seat belts. I'll
> just do the wire loom thing to connect the consoles together. I'll try to
> take pictures and post them so others can get ideas for securing and
> mounting
> ham/cb/scanner/audio equipment.
>
> -Scott
> '97 TJ SE
I think that might be the back side of the mount for the sport bar
section that runs to the windshield. That bar section is removable for
when you want to drive with the windshield folded down.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
>>> I found the rectangular plugs on the upper corners of the rollbar.
>>> Where do the wires to the soundbar come out? Where is the lower plug?
>>
>> I don't think they are 'allowed' to run wires through the sport bar
>> for structural integrity. I don't think holes are allowed. I could
>> be mistaken but...
>>
>> Note the hole for the seat belt is a welded tube with the bolt going
>> through that.
>>
>> If I remember right, the ones I have seen were run under the padding.
>
> OK. I didn't want to pay $500 for an AM/FM radio in 1997 so I got it blank.
> I have no padding over the sport bar. I wonder what those rectangular holes
> were for? They are on the back side near the bend on the top straight part
> of the tube. Yes, the bolts are run through tubes for the seat belts. I'll
> just do the wire loom thing to connect the consoles together. I'll try to
> take pictures and post them so others can get ideas for securing and
> mounting
> ham/cb/scanner/audio equipment.
>
> -Scott
> '97 TJ SE
I think that might be the back side of the mount for the sport bar
section that runs to the windshield. That bar section is removable for
when you want to drive with the windshield folded down.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
07-06-2007, 12:48 PM
#37
Guest
Posts: n/a
Re: Where do the wires come out?
Scott in Baltimore wrote:
>>> I found the rectangular plugs on the upper corners of the rollbar.
>>> Where do the wires to the soundbar come out? Where is the lower plug?
>>
>> I don't think they are 'allowed' to run wires through the sport bar
>> for structural integrity. I don't think holes are allowed. I could
>> be mistaken but...
>>
>> Note the hole for the seat belt is a welded tube with the bolt going
>> through that.
>>
>> If I remember right, the ones I have seen were run under the padding.
>
> OK. I didn't want to pay $500 for an AM/FM radio in 1997 so I got it blank.
> I have no padding over the sport bar. I wonder what those rectangular holes
> were for? They are on the back side near the bend on the top straight part
> of the tube. Yes, the bolts are run through tubes for the seat belts. I'll
> just do the wire loom thing to connect the consoles together. I'll try to
> take pictures and post them so others can get ideas for securing and
> mounting
> ham/cb/scanner/audio equipment.
>
> -Scott
> '97 TJ SE
I think that might be the back side of the mount for the sport bar
section that runs to the windshield. That bar section is removable for
when you want to drive with the windshield folded down.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
>>> I found the rectangular plugs on the upper corners of the rollbar.
>>> Where do the wires to the soundbar come out? Where is the lower plug?
>>
>> I don't think they are 'allowed' to run wires through the sport bar
>> for structural integrity. I don't think holes are allowed. I could
>> be mistaken but...
>>
>> Note the hole for the seat belt is a welded tube with the bolt going
>> through that.
>>
>> If I remember right, the ones I have seen were run under the padding.
>
> OK. I didn't want to pay $500 for an AM/FM radio in 1997 so I got it blank.
> I have no padding over the sport bar. I wonder what those rectangular holes
> were for? They are on the back side near the bend on the top straight part
> of the tube. Yes, the bolts are run through tubes for the seat belts. I'll
> just do the wire loom thing to connect the consoles together. I'll try to
> take pictures and post them so others can get ideas for securing and
> mounting
> ham/cb/scanner/audio equipment.
>
> -Scott
> '97 TJ SE
I think that might be the back side of the mount for the sport bar
section that runs to the windshield. That bar section is removable for
when you want to drive with the windshield folded down.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
07-06-2007, 08:02 PM
#38
Guest
Posts: n/a
Re: Where do the wires come out?
It's the "roll bar" that's against the NHRA rule book to have an open
hole.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:468e519d$0$8538$9a6e19ea@unlimited.newshostin g.com...
>
> I don't think they are 'allowed' to run wires through the sport bar for
> structural integrity. I don't think holes are allowed. I could be
> mistaken but...
>
> Note the hole for the seat belt is a welded tube with the bolt going
> through that.
>
> If I remember right, the ones I have seen were run under the padding.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
--
Posted via a free Usenet account from http://www.teranews.com
hole.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:468e519d$0$8538$9a6e19ea@unlimited.newshostin g.com...
>
> I don't think they are 'allowed' to run wires through the sport bar for
> structural integrity. I don't think holes are allowed. I could be
> mistaken but...
>
> Note the hole for the seat belt is a welded tube with the bolt going
> through that.
>
> If I remember right, the ones I have seen were run under the padding.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
--
Posted via a free Usenet account from http://www.teranews.com
07-06-2007, 08:02 PM
#39
Guest
Posts: n/a
Re: Where do the wires come out?
It's the "roll bar" that's against the NHRA rule book to have an open
hole.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:468e519d$0$8538$9a6e19ea@unlimited.newshostin g.com...
>
> I don't think they are 'allowed' to run wires through the sport bar for
> structural integrity. I don't think holes are allowed. I could be
> mistaken but...
>
> Note the hole for the seat belt is a welded tube with the bolt going
> through that.
>
> If I remember right, the ones I have seen were run under the padding.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
--
Posted via a free Usenet account from http://www.teranews.com
hole.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:468e519d$0$8538$9a6e19ea@unlimited.newshostin g.com...
>
> I don't think they are 'allowed' to run wires through the sport bar for
> structural integrity. I don't think holes are allowed. I could be
> mistaken but...
>
> Note the hole for the seat belt is a welded tube with the bolt going
> through that.
>
> If I remember right, the ones I have seen were run under the padding.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
--
Posted via a free Usenet account from http://www.teranews.com
07-06-2007, 08:02 PM
#40
Guest
Posts: n/a
Re: Where do the wires come out?
It's the "roll bar" that's against the NHRA rule book to have an open
hole.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:468e519d$0$8538$9a6e19ea@unlimited.newshostin g.com...
>
> I don't think they are 'allowed' to run wires through the sport bar for
> structural integrity. I don't think holes are allowed. I could be
> mistaken but...
>
> Note the hole for the seat belt is a welded tube with the bolt going
> through that.
>
> If I remember right, the ones I have seen were run under the padding.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
--
Posted via a free Usenet account from http://www.teranews.com
hole.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:468e519d$0$8538$9a6e19ea@unlimited.newshostin g.com...
>
> I don't think they are 'allowed' to run wires through the sport bar for
> structural integrity. I don't think holes are allowed. I could be
> mistaken but...
>
> Note the hole for the seat belt is a welded tube with the bolt going
> through that.
>
> If I remember right, the ones I have seen were run under the padding.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
--
Posted via a free Usenet account from http://www.teranews.com
