Wheel size for 33x12.50
11-11-2003, 03:16 PM
#2
Guest
Posts: n/a
Re: Wheel size for 33x12.50
Hi Arvin,
Your only choice for backspacing is four inches:
http://www.midwestlandcruiser.com/im...r767_wheel.htm
I prefer tens, knowing I will break the bead, and tare up the rim, but
then I'll be at the top of the hill.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
arvin wrote:
>
> I'm looking to buy some AR 767s and I don't know what the best wheel size is
> for that big of a tire 15x8 or 15x10.
> Does anyone know the backspacing and bolt pattern for a CJ-7 '82
Your only choice for backspacing is four inches:
http://www.midwestlandcruiser.com/im...r767_wheel.htm
I prefer tens, knowing I will break the bead, and tare up the rim, but
then I'll be at the top of the hill.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
arvin wrote:
>
> I'm looking to buy some AR 767s and I don't know what the best wheel size is
> for that big of a tire 15x8 or 15x10.
> Does anyone know the backspacing and bolt pattern for a CJ-7 '82
11-11-2003, 03:16 PM
#3
Guest
Posts: n/a
Re: Wheel size for 33x12.50
Hi Arvin,
Your only choice for backspacing is four inches:
http://www.midwestlandcruiser.com/im...r767_wheel.htm
I prefer tens, knowing I will break the bead, and tare up the rim, but
then I'll be at the top of the hill.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
arvin wrote:
>
> I'm looking to buy some AR 767s and I don't know what the best wheel size is
> for that big of a tire 15x8 or 15x10.
> Does anyone know the backspacing and bolt pattern for a CJ-7 '82
Your only choice for backspacing is four inches:
http://www.midwestlandcruiser.com/im...r767_wheel.htm
I prefer tens, knowing I will break the bead, and tare up the rim, but
then I'll be at the top of the hill.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
arvin wrote:
>
> I'm looking to buy some AR 767s and I don't know what the best wheel size is
> for that big of a tire 15x8 or 15x10.
> Does anyone know the backspacing and bolt pattern for a CJ-7 '82
11-11-2003, 03:16 PM
#4
Guest
Posts: n/a
Re: Wheel size for 33x12.50
Hi Arvin,
Your only choice for backspacing is four inches:
http://www.midwestlandcruiser.com/im...r767_wheel.htm
I prefer tens, knowing I will break the bead, and tare up the rim, but
then I'll be at the top of the hill.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
arvin wrote:
>
> I'm looking to buy some AR 767s and I don't know what the best wheel size is
> for that big of a tire 15x8 or 15x10.
> Does anyone know the backspacing and bolt pattern for a CJ-7 '82
Your only choice for backspacing is four inches:
http://www.midwestlandcruiser.com/im...r767_wheel.htm
I prefer tens, knowing I will break the bead, and tare up the rim, but
then I'll be at the top of the hill.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
arvin wrote:
>
> I'm looking to buy some AR 767s and I don't know what the best wheel size is
> for that big of a tire 15x8 or 15x10.
> Does anyone know the backspacing and bolt pattern for a CJ-7 '82
11-11-2003, 03:20 PM
#5
Guest
Posts: n/a
Re: Wheel size for 33x12.50
In article <3FB14398.C655CCB3@***.net>,
L.W.(ßill) ------ III <----------@***.net> wrote:
> I prefer tens, knowing I will break the bead, and tare up the rim, but
> then I'll be at the top of the hill....
on three wheels.
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
L.W.(ßill) ------ III <----------@***.net> wrote:
> I prefer tens, knowing I will break the bead, and tare up the rim, but
> then I'll be at the top of the hill....
on three wheels.
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
11-11-2003, 03:20 PM
#6
Guest
Posts: n/a
Re: Wheel size for 33x12.50
In article <3FB14398.C655CCB3@***.net>,
L.W.(ßill) ------ III <----------@***.net> wrote:
> I prefer tens, knowing I will break the bead, and tare up the rim, but
> then I'll be at the top of the hill....
on three wheels.
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
L.W.(ßill) ------ III <----------@***.net> wrote:
> I prefer tens, knowing I will break the bead, and tare up the rim, but
> then I'll be at the top of the hill....
on three wheels.
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
11-11-2003, 03:20 PM
#7
Guest
Posts: n/a
Re: Wheel size for 33x12.50
In article <3FB14398.C655CCB3@***.net>,
L.W.(ßill) ------ III <----------@***.net> wrote:
> I prefer tens, knowing I will break the bead, and tare up the rim, but
> then I'll be at the top of the hill....
on three wheels.
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
L.W.(ßill) ------ III <----------@***.net> wrote:
> I prefer tens, knowing I will break the bead, and tare up the rim, but
> then I'll be at the top of the hill....
on three wheels.
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
11-11-2003, 03:48 PM
#8
Guest
Posts: n/a
Re: Wheel size for 33x12.50
Arvin wrote:
>I don't know what the best wheel size is
>> for [33x12.50] 15x8 or 15x10?
I like 10s. Some like 8" rims, the theory being that popping a bead at
extremely low pressure is less likely with a narrower rim. Personally, I have
yet to pop a bead at 10-12 lbs, even with 10" rims.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>I don't know what the best wheel size is
>> for [33x12.50] 15x8 or 15x10?
I like 10s. Some like 8" rims, the theory being that popping a bead at
extremely low pressure is less likely with a narrower rim. Personally, I have
yet to pop a bead at 10-12 lbs, even with 10" rims.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
11-11-2003, 03:48 PM
#9
Guest
Posts: n/a
Re: Wheel size for 33x12.50
Arvin wrote:
>I don't know what the best wheel size is
>> for [33x12.50] 15x8 or 15x10?
I like 10s. Some like 8" rims, the theory being that popping a bead at
extremely low pressure is less likely with a narrower rim. Personally, I have
yet to pop a bead at 10-12 lbs, even with 10" rims.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>I don't know what the best wheel size is
>> for [33x12.50] 15x8 or 15x10?
I like 10s. Some like 8" rims, the theory being that popping a bead at
extremely low pressure is less likely with a narrower rim. Personally, I have
yet to pop a bead at 10-12 lbs, even with 10" rims.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
11-11-2003, 03:48 PM
#10
Guest
Posts: n/a
Re: Wheel size for 33x12.50
Arvin wrote:
>I don't know what the best wheel size is
>> for [33x12.50] 15x8 or 15x10?
I like 10s. Some like 8" rims, the theory being that popping a bead at
extremely low pressure is less likely with a narrower rim. Personally, I have
yet to pop a bead at 10-12 lbs, even with 10" rims.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>I don't know what the best wheel size is
>> for [33x12.50] 15x8 or 15x10?
I like 10s. Some like 8" rims, the theory being that popping a bead at
extremely low pressure is less likely with a narrower rim. Personally, I have
yet to pop a bead at 10-12 lbs, even with 10" rims.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
