What the Hell is Loctit 515?
Guest
Posts: n/a
Re: What the Hell is Loctit 515?
Jerry McG did pass the time by typing:
> I resealed the rear main on my '94 YJ yesterday and per the official shop
> manual the edges of the rear bearing cap should be sealed with a small (3mm)
> bead of Loctite 515. Unfortunately no one in town, including my local Jeep
> dealer had any idea what that stuff was. Everyone who knew what I was
> referring to recommended using hi-temp RTV instead, which is what I used.
> Anyone know what this 515 is?
Oh OH OH! Do I know. :)
http://www.midwayautosupply.com/deta...tion.asp?10107
It's an anerobic (cures in the absence of air) selant/real thin gasket
maker. I need it to seal up my charger and the mounting flanges.
518 is similar as I have found is a NAPA Permatex http://tinyurl.com/yta2v
Don't use RTV! They arn't the same thing.
Also remember that 515 needs several hours (8 higly recomended) to cure
before any pressure/vac is applied.
--
DougW
> I resealed the rear main on my '94 YJ yesterday and per the official shop
> manual the edges of the rear bearing cap should be sealed with a small (3mm)
> bead of Loctite 515. Unfortunately no one in town, including my local Jeep
> dealer had any idea what that stuff was. Everyone who knew what I was
> referring to recommended using hi-temp RTV instead, which is what I used.
> Anyone know what this 515 is?
Oh OH OH! Do I know. :)
http://www.midwayautosupply.com/deta...tion.asp?10107
It's an anerobic (cures in the absence of air) selant/real thin gasket
maker. I need it to seal up my charger and the mounting flanges.
518 is similar as I have found is a NAPA Permatex http://tinyurl.com/yta2v
Don't use RTV! They arn't the same thing.
Also remember that 515 needs several hours (8 higly recomended) to cure
before any pressure/vac is applied.
--
DougW
Guest
Posts: n/a
Re: What the Hell is Loctit 515?
Jerry McG did pass the time by typing:
> I resealed the rear main on my '94 YJ yesterday and per the official shop
> manual the edges of the rear bearing cap should be sealed with a small (3mm)
> bead of Loctite 515. Unfortunately no one in town, including my local Jeep
> dealer had any idea what that stuff was. Everyone who knew what I was
> referring to recommended using hi-temp RTV instead, which is what I used.
> Anyone know what this 515 is?
Oh OH OH! Do I know. :)
http://www.midwayautosupply.com/deta...tion.asp?10107
It's an anerobic (cures in the absence of air) selant/real thin gasket
maker. I need it to seal up my charger and the mounting flanges.
518 is similar as I have found is a NAPA Permatex http://tinyurl.com/yta2v
Don't use RTV! They arn't the same thing.
Also remember that 515 needs several hours (8 higly recomended) to cure
before any pressure/vac is applied.
--
DougW
> I resealed the rear main on my '94 YJ yesterday and per the official shop
> manual the edges of the rear bearing cap should be sealed with a small (3mm)
> bead of Loctite 515. Unfortunately no one in town, including my local Jeep
> dealer had any idea what that stuff was. Everyone who knew what I was
> referring to recommended using hi-temp RTV instead, which is what I used.
> Anyone know what this 515 is?
Oh OH OH! Do I know. :)
http://www.midwayautosupply.com/deta...tion.asp?10107
It's an anerobic (cures in the absence of air) selant/real thin gasket
maker. I need it to seal up my charger and the mounting flanges.
518 is similar as I have found is a NAPA Permatex http://tinyurl.com/yta2v
Don't use RTV! They arn't the same thing.
Also remember that 515 needs several hours (8 higly recomended) to cure
before any pressure/vac is applied.
--
DougW
Guest
Posts: n/a
Re: What the Hell is Loctit 515?
Jerry McG did pass the time by typing:
> I resealed the rear main on my '94 YJ yesterday and per the official shop
> manual the edges of the rear bearing cap should be sealed with a small (3mm)
> bead of Loctite 515. Unfortunately no one in town, including my local Jeep
> dealer had any idea what that stuff was. Everyone who knew what I was
> referring to recommended using hi-temp RTV instead, which is what I used.
> Anyone know what this 515 is?
Oh OH OH! Do I know. :)
http://www.midwayautosupply.com/deta...tion.asp?10107
It's an anerobic (cures in the absence of air) selant/real thin gasket
maker. I need it to seal up my charger and the mounting flanges.
518 is similar as I have found is a NAPA Permatex http://tinyurl.com/yta2v
Don't use RTV! They arn't the same thing.
Also remember that 515 needs several hours (8 higly recomended) to cure
before any pressure/vac is applied.
--
DougW
> I resealed the rear main on my '94 YJ yesterday and per the official shop
> manual the edges of the rear bearing cap should be sealed with a small (3mm)
> bead of Loctite 515. Unfortunately no one in town, including my local Jeep
> dealer had any idea what that stuff was. Everyone who knew what I was
> referring to recommended using hi-temp RTV instead, which is what I used.
> Anyone know what this 515 is?
Oh OH OH! Do I know. :)
http://www.midwayautosupply.com/deta...tion.asp?10107
It's an anerobic (cures in the absence of air) selant/real thin gasket
maker. I need it to seal up my charger and the mounting flanges.
518 is similar as I have found is a NAPA Permatex http://tinyurl.com/yta2v
Don't use RTV! They arn't the same thing.
Also remember that 515 needs several hours (8 higly recomended) to cure
before any pressure/vac is applied.
--
DougW
Guest
Posts: n/a
Re: What the Hell is Loctit 515?
"DougW" <post.replies@invalid.address> wrote in message
news:dl1gc.10254$ec1.7659@okepread01...
> Jerry McG did pass the time by typing:
> > I resealed the rear main on my '94 YJ yesterday and per the official
shop
> > manual the edges of the rear bearing cap should be sealed with a small
(3mm)
> > bead of Loctite 515. Unfortunately no one in town, including my local
Jeep
> > dealer had any idea what that stuff was. Everyone who knew what I was
> > referring to recommended using hi-temp RTV instead, which is what I
used.
> > Anyone know what this 515 is?
>
> Oh OH OH! Do I know. :)
> http://www.midwayautosupply.com/deta...tion.asp?10107
>
> It's an anerobic (cures in the absence of air)
wouldn't it cure in the packaging then? weird....
> 518 is similar as I have found is a NAPA Permatex http://tinyurl.com/yta2v
>
> Don't use RTV! They arn't the same thing.
>
> Also remember that 515 needs several hours (8 higly recomended) to cure
> before any pressure/vac is applied.
>
> --
> DougW
>
>
Guest
Posts: n/a
Re: What the Hell is Loctit 515?
"DougW" <post.replies@invalid.address> wrote in message
news:dl1gc.10254$ec1.7659@okepread01...
> Jerry McG did pass the time by typing:
> > I resealed the rear main on my '94 YJ yesterday and per the official
shop
> > manual the edges of the rear bearing cap should be sealed with a small
(3mm)
> > bead of Loctite 515. Unfortunately no one in town, including my local
Jeep
> > dealer had any idea what that stuff was. Everyone who knew what I was
> > referring to recommended using hi-temp RTV instead, which is what I
used.
> > Anyone know what this 515 is?
>
> Oh OH OH! Do I know. :)
> http://www.midwayautosupply.com/deta...tion.asp?10107
>
> It's an anerobic (cures in the absence of air)
wouldn't it cure in the packaging then? weird....
> 518 is similar as I have found is a NAPA Permatex http://tinyurl.com/yta2v
>
> Don't use RTV! They arn't the same thing.
>
> Also remember that 515 needs several hours (8 higly recomended) to cure
> before any pressure/vac is applied.
>
> --
> DougW
>
>
Guest
Posts: n/a
Re: What the Hell is Loctit 515?
"DougW" <post.replies@invalid.address> wrote in message
news:dl1gc.10254$ec1.7659@okepread01...
> Jerry McG did pass the time by typing:
> > I resealed the rear main on my '94 YJ yesterday and per the official
shop
> > manual the edges of the rear bearing cap should be sealed with a small
(3mm)
> > bead of Loctite 515. Unfortunately no one in town, including my local
Jeep
> > dealer had any idea what that stuff was. Everyone who knew what I was
> > referring to recommended using hi-temp RTV instead, which is what I
used.
> > Anyone know what this 515 is?
>
> Oh OH OH! Do I know. :)
> http://www.midwayautosupply.com/deta...tion.asp?10107
>
> It's an anerobic (cures in the absence of air)
wouldn't it cure in the packaging then? weird....
> 518 is similar as I have found is a NAPA Permatex http://tinyurl.com/yta2v
>
> Don't use RTV! They arn't the same thing.
>
> Also remember that 515 needs several hours (8 higly recomended) to cure
> before any pressure/vac is applied.
>
> --
> DougW
>
>
Guest
Posts: n/a
Re: What the Hell is Loctit 515?
"DougW" <post.replies@invalid.address> wrote in message
news:dl1gc.10254$ec1.7659@okepread01...
> Jerry McG did pass the time by typing:
> > I resealed the rear main on my '94 YJ yesterday and per the official
shop
> > manual the edges of the rear bearing cap should be sealed with a small
(3mm)
> > bead of Loctite 515. Unfortunately no one in town, including my local
Jeep
> > dealer had any idea what that stuff was. Everyone who knew what I was
> > referring to recommended using hi-temp RTV instead, which is what I
used.
> > Anyone know what this 515 is?
>
> Oh OH OH! Do I know. :)
> http://www.midwayautosupply.com/deta...tion.asp?10107
>
> It's an anerobic (cures in the absence of air)
wouldn't it cure in the packaging then? weird....
> 518 is similar as I have found is a NAPA Permatex http://tinyurl.com/yta2v
>
> Don't use RTV! They arn't the same thing.
>
> Also remember that 515 needs several hours (8 higly recomended) to cure
> before any pressure/vac is applied.
>
> --
> DougW
>
>
Guest
Posts: n/a
Re: What the Hell is Loctit 515?
herman did pass the time by typing:
> "DougW" <post.replies@invalid.address> wrote in message
> news:dl1gc.10254$ec1.7659@okepread01...
>> Jerry McG did pass the time by typing:
>>> I resealed the rear main on my '94 YJ yesterday and per the official shop
>>> manual the edges of the rear bearing cap should be sealed with a small (3mm)
>>> bead of Loctite 515. Unfortunately no one in town, including my local Jeep
>>> dealer had any idea what that stuff was. Everyone who knew what I was
>>> referring to recommended using hi-temp RTV instead, which is what I used.
>>> Anyone know what this 515 is?
>>
>> Oh OH OH! Do I know. :)
>> http://www.midwayautosupply.com/deta...tion.asp?10107
>>
>> It's an anerobic (cures in the absence of air)
>
>
> wouldn't it cure in the packaging then? weird....
You would think so, but actually it won't. The package is designed to
let air in. The product cures when exposed to metal surfaces and in the
absence of oxygen. loctite's website has some technical stuff.
--
DougW
> "DougW" <post.replies@invalid.address> wrote in message
> news:dl1gc.10254$ec1.7659@okepread01...
>> Jerry McG did pass the time by typing:
>>> I resealed the rear main on my '94 YJ yesterday and per the official shop
>>> manual the edges of the rear bearing cap should be sealed with a small (3mm)
>>> bead of Loctite 515. Unfortunately no one in town, including my local Jeep
>>> dealer had any idea what that stuff was. Everyone who knew what I was
>>> referring to recommended using hi-temp RTV instead, which is what I used.
>>> Anyone know what this 515 is?
>>
>> Oh OH OH! Do I know. :)
>> http://www.midwayautosupply.com/deta...tion.asp?10107
>>
>> It's an anerobic (cures in the absence of air)
>
>
> wouldn't it cure in the packaging then? weird....
You would think so, but actually it won't. The package is designed to
let air in. The product cures when exposed to metal surfaces and in the
absence of oxygen. loctite's website has some technical stuff.
--
DougW
Guest
Posts: n/a
Re: What the Hell is Loctit 515?
herman did pass the time by typing:
> "DougW" <post.replies@invalid.address> wrote in message
> news:dl1gc.10254$ec1.7659@okepread01...
>> Jerry McG did pass the time by typing:
>>> I resealed the rear main on my '94 YJ yesterday and per the official shop
>>> manual the edges of the rear bearing cap should be sealed with a small (3mm)
>>> bead of Loctite 515. Unfortunately no one in town, including my local Jeep
>>> dealer had any idea what that stuff was. Everyone who knew what I was
>>> referring to recommended using hi-temp RTV instead, which is what I used.
>>> Anyone know what this 515 is?
>>
>> Oh OH OH! Do I know. :)
>> http://www.midwayautosupply.com/deta...tion.asp?10107
>>
>> It's an anerobic (cures in the absence of air)
>
>
> wouldn't it cure in the packaging then? weird....
You would think so, but actually it won't. The package is designed to
let air in. The product cures when exposed to metal surfaces and in the
absence of oxygen. loctite's website has some technical stuff.
--
DougW
> "DougW" <post.replies@invalid.address> wrote in message
> news:dl1gc.10254$ec1.7659@okepread01...
>> Jerry McG did pass the time by typing:
>>> I resealed the rear main on my '94 YJ yesterday and per the official shop
>>> manual the edges of the rear bearing cap should be sealed with a small (3mm)
>>> bead of Loctite 515. Unfortunately no one in town, including my local Jeep
>>> dealer had any idea what that stuff was. Everyone who knew what I was
>>> referring to recommended using hi-temp RTV instead, which is what I used.
>>> Anyone know what this 515 is?
>>
>> Oh OH OH! Do I know. :)
>> http://www.midwayautosupply.com/deta...tion.asp?10107
>>
>> It's an anerobic (cures in the absence of air)
>
>
> wouldn't it cure in the packaging then? weird....
You would think so, but actually it won't. The package is designed to
let air in. The product cures when exposed to metal surfaces and in the
absence of oxygen. loctite's website has some technical stuff.
--
DougW
Guest
Posts: n/a
Re: What the Hell is Loctit 515?
herman did pass the time by typing:
> "DougW" <post.replies@invalid.address> wrote in message
> news:dl1gc.10254$ec1.7659@okepread01...
>> Jerry McG did pass the time by typing:
>>> I resealed the rear main on my '94 YJ yesterday and per the official shop
>>> manual the edges of the rear bearing cap should be sealed with a small (3mm)
>>> bead of Loctite 515. Unfortunately no one in town, including my local Jeep
>>> dealer had any idea what that stuff was. Everyone who knew what I was
>>> referring to recommended using hi-temp RTV instead, which is what I used.
>>> Anyone know what this 515 is?
>>
>> Oh OH OH! Do I know. :)
>> http://www.midwayautosupply.com/deta...tion.asp?10107
>>
>> It's an anerobic (cures in the absence of air)
>
>
> wouldn't it cure in the packaging then? weird....
You would think so, but actually it won't. The package is designed to
let air in. The product cures when exposed to metal surfaces and in the
absence of oxygen. loctite's website has some technical stuff.
--
DougW
> "DougW" <post.replies@invalid.address> wrote in message
> news:dl1gc.10254$ec1.7659@okepread01...
>> Jerry McG did pass the time by typing:
>>> I resealed the rear main on my '94 YJ yesterday and per the official shop
>>> manual the edges of the rear bearing cap should be sealed with a small (3mm)
>>> bead of Loctite 515. Unfortunately no one in town, including my local Jeep
>>> dealer had any idea what that stuff was. Everyone who knew what I was
>>> referring to recommended using hi-temp RTV instead, which is what I used.
>>> Anyone know what this 515 is?
>>
>> Oh OH OH! Do I know. :)
>> http://www.midwayautosupply.com/deta...tion.asp?10107
>>
>> It's an anerobic (cures in the absence of air)
>
>
> wouldn't it cure in the packaging then? weird....
You would think so, but actually it won't. The package is designed to
let air in. The product cures when exposed to metal surfaces and in the
absence of oxygen. loctite's website has some technical stuff.
--
DougW
