What do you guys make of this?
10-19-2003, 07:04 PM
#11
Guest
Posts: n/a
Re: What do you guys make of this?
L.W. (ßill) ------ III did pass the time by typing:
> The seller had an aquarium, but no rubber caps:
> http://www.----------.com/rubbercaps.jpg
> I hope you don't have to pass SMOG, cause it'll never happen with
> 450 CFM Holley.
I'm thinking there is a lot of missing bits. Just running from memory
on the old Chevy 305, one of those fed the emissions system and the other
provided vac to the heat valve.. ya know the valve in the intake snorkle
that sucks air past the headers so it gets warmer faster in cold weather.
My old motor book is in the attic or I'd take a closer look.
> The seller had an aquarium, but no rubber caps:
> http://www.----------.com/rubbercaps.jpg
> I hope you don't have to pass SMOG, cause it'll never happen with
> 450 CFM Holley.
I'm thinking there is a lot of missing bits. Just running from memory
on the old Chevy 305, one of those fed the emissions system and the other
provided vac to the heat valve.. ya know the valve in the intake snorkle
that sucks air past the headers so it gets warmer faster in cold weather.
My old motor book is in the attic or I'd take a closer look.
10-19-2003, 07:04 PM
#12
Guest
Posts: n/a
Re: What do you guys make of this?
L.W. (ßill) ------ III did pass the time by typing:
> The seller had an aquarium, but no rubber caps:
> http://www.----------.com/rubbercaps.jpg
> I hope you don't have to pass SMOG, cause it'll never happen with
> 450 CFM Holley.
I'm thinking there is a lot of missing bits. Just running from memory
on the old Chevy 305, one of those fed the emissions system and the other
provided vac to the heat valve.. ya know the valve in the intake snorkle
that sucks air past the headers so it gets warmer faster in cold weather.
My old motor book is in the attic or I'd take a closer look.
> The seller had an aquarium, but no rubber caps:
> http://www.----------.com/rubbercaps.jpg
> I hope you don't have to pass SMOG, cause it'll never happen with
> 450 CFM Holley.
I'm thinking there is a lot of missing bits. Just running from memory
on the old Chevy 305, one of those fed the emissions system and the other
provided vac to the heat valve.. ya know the valve in the intake snorkle
that sucks air past the headers so it gets warmer faster in cold weather.
My old motor book is in the attic or I'd take a closer look.
10-19-2003, 07:04 PM
#13
Guest
Posts: n/a
Re: What do you guys make of this?
L.W. (ßill) ------ III did pass the time by typing:
> The seller had an aquarium, but no rubber caps:
> http://www.----------.com/rubbercaps.jpg
> I hope you don't have to pass SMOG, cause it'll never happen with
> 450 CFM Holley.
I'm thinking there is a lot of missing bits. Just running from memory
on the old Chevy 305, one of those fed the emissions system and the other
provided vac to the heat valve.. ya know the valve in the intake snorkle
that sucks air past the headers so it gets warmer faster in cold weather.
My old motor book is in the attic or I'd take a closer look.
> The seller had an aquarium, but no rubber caps:
> http://www.----------.com/rubbercaps.jpg
> I hope you don't have to pass SMOG, cause it'll never happen with
> 450 CFM Holley.
I'm thinking there is a lot of missing bits. Just running from memory
on the old Chevy 305, one of those fed the emissions system and the other
provided vac to the heat valve.. ya know the valve in the intake snorkle
that sucks air past the headers so it gets warmer faster in cold weather.
My old motor book is in the attic or I'd take a closer look.
10-19-2003, 07:10 PM
#14
Guest
Posts: n/a
Re: What do you guys make of this?
On Sun, 19 Oct 2003 15:54:41 -0700, L.W.(ßill) ------ III
<----------@***.net> shared the following:
> The seller had an aquarium, but no rubber caps:
hahaha! I usually just use a really short length of rubber tubing
with a big ol' screw screwed into one end of it to plug it. Cuz I'm
cheap like that.
>http://www.----------.com/rubbercaps.jpg
> I hope you don't have to pass SMOG, cause it'll never happen with
>450 CFM Holley.
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>travis wrote:
>>
>> Please take a look at this:
>> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
>> That vacuum line connects 2 vacuum points on the intake manifold to
>> each other. Here's another shot where you can see the whole vacuum
>> line:
>> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
>> I don't see the point in that line. Should I be able to just plug up
>> each vacuum fitting on the manifold and get rid of that line, or is it
>> actually trying to perform some kind of useful function? Thank you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<----------@***.net> shared the following:
> The seller had an aquarium, but no rubber caps:
hahaha! I usually just use a really short length of rubber tubing
with a big ol' screw screwed into one end of it to plug it. Cuz I'm
cheap like that.
>http://www.----------.com/rubbercaps.jpg
> I hope you don't have to pass SMOG, cause it'll never happen with
>450 CFM Holley.
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>travis wrote:
>>
>> Please take a look at this:
>> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
>> That vacuum line connects 2 vacuum points on the intake manifold to
>> each other. Here's another shot where you can see the whole vacuum
>> line:
>> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
>> I don't see the point in that line. Should I be able to just plug up
>> each vacuum fitting on the manifold and get rid of that line, or is it
>> actually trying to perform some kind of useful function? Thank you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-19-2003, 07:10 PM
#15
Guest
Posts: n/a
Re: What do you guys make of this?
On Sun, 19 Oct 2003 15:54:41 -0700, L.W.(ßill) ------ III
<----------@***.net> shared the following:
> The seller had an aquarium, but no rubber caps:
hahaha! I usually just use a really short length of rubber tubing
with a big ol' screw screwed into one end of it to plug it. Cuz I'm
cheap like that.
>http://www.----------.com/rubbercaps.jpg
> I hope you don't have to pass SMOG, cause it'll never happen with
>450 CFM Holley.
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>travis wrote:
>>
>> Please take a look at this:
>> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
>> That vacuum line connects 2 vacuum points on the intake manifold to
>> each other. Here's another shot where you can see the whole vacuum
>> line:
>> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
>> I don't see the point in that line. Should I be able to just plug up
>> each vacuum fitting on the manifold and get rid of that line, or is it
>> actually trying to perform some kind of useful function? Thank you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<----------@***.net> shared the following:
> The seller had an aquarium, but no rubber caps:
hahaha! I usually just use a really short length of rubber tubing
with a big ol' screw screwed into one end of it to plug it. Cuz I'm
cheap like that.
>http://www.----------.com/rubbercaps.jpg
> I hope you don't have to pass SMOG, cause it'll never happen with
>450 CFM Holley.
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>travis wrote:
>>
>> Please take a look at this:
>> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
>> That vacuum line connects 2 vacuum points on the intake manifold to
>> each other. Here's another shot where you can see the whole vacuum
>> line:
>> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
>> I don't see the point in that line. Should I be able to just plug up
>> each vacuum fitting on the manifold and get rid of that line, or is it
>> actually trying to perform some kind of useful function? Thank you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-19-2003, 07:10 PM
#16
Guest
Posts: n/a
Re: What do you guys make of this?
On Sun, 19 Oct 2003 15:54:41 -0700, L.W.(ßill) ------ III
<----------@***.net> shared the following:
> The seller had an aquarium, but no rubber caps:
hahaha! I usually just use a really short length of rubber tubing
with a big ol' screw screwed into one end of it to plug it. Cuz I'm
cheap like that.
>http://www.----------.com/rubbercaps.jpg
> I hope you don't have to pass SMOG, cause it'll never happen with
>450 CFM Holley.
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>travis wrote:
>>
>> Please take a look at this:
>> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
>> That vacuum line connects 2 vacuum points on the intake manifold to
>> each other. Here's another shot where you can see the whole vacuum
>> line:
>> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
>> I don't see the point in that line. Should I be able to just plug up
>> each vacuum fitting on the manifold and get rid of that line, or is it
>> actually trying to perform some kind of useful function? Thank you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<----------@***.net> shared the following:
> The seller had an aquarium, but no rubber caps:
hahaha! I usually just use a really short length of rubber tubing
with a big ol' screw screwed into one end of it to plug it. Cuz I'm
cheap like that.
>http://www.----------.com/rubbercaps.jpg
> I hope you don't have to pass SMOG, cause it'll never happen with
>450 CFM Holley.
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>travis wrote:
>>
>> Please take a look at this:
>> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
>> That vacuum line connects 2 vacuum points on the intake manifold to
>> each other. Here's another shot where you can see the whole vacuum
>> line:
>> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
>> I don't see the point in that line. Should I be able to just plug up
>> each vacuum fitting on the manifold and get rid of that line, or is it
>> actually trying to perform some kind of useful function? Thank you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-20-2003, 12:32 PM
#17
Guest
Posts: n/a
Re: What do you guys make of this?
You are right, there is no useful function being done here. He could have,
and probably should, plugged the fittings. But, if he had trouble finding,
or was simply too lazy to look for, plugs for those fittings, connecting
them together with a piece of hose is as good a substitute as any.
"travis" <travist34removethis@hotmail.com> wrote in message
news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com...
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
and probably should, plugged the fittings. But, if he had trouble finding,
or was simply too lazy to look for, plugs for those fittings, connecting
them together with a piece of hose is as good a substitute as any.
"travis" <travist34removethis@hotmail.com> wrote in message
news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com...
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-20-2003, 12:32 PM
#18
Guest
Posts: n/a
Re: What do you guys make of this?
You are right, there is no useful function being done here. He could have,
and probably should, plugged the fittings. But, if he had trouble finding,
or was simply too lazy to look for, plugs for those fittings, connecting
them together with a piece of hose is as good a substitute as any.
"travis" <travist34removethis@hotmail.com> wrote in message
news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com...
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
and probably should, plugged the fittings. But, if he had trouble finding,
or was simply too lazy to look for, plugs for those fittings, connecting
them together with a piece of hose is as good a substitute as any.
"travis" <travist34removethis@hotmail.com> wrote in message
news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com...
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-20-2003, 12:32 PM
#19
Guest
Posts: n/a
Re: What do you guys make of this?
You are right, there is no useful function being done here. He could have,
and probably should, plugged the fittings. But, if he had trouble finding,
or was simply too lazy to look for, plugs for those fittings, connecting
them together with a piece of hose is as good a substitute as any.
"travis" <travist34removethis@hotmail.com> wrote in message
news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com...
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
and probably should, plugged the fittings. But, if he had trouble finding,
or was simply too lazy to look for, plugs for those fittings, connecting
them together with a piece of hose is as good a substitute as any.
"travis" <travist34removethis@hotmail.com> wrote in message
news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com...
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Thread
Thread Starter
Forum
Replies
Last Post
L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III
Jeep Mailing List
24
12-12-2003 04:23 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
