What do you guys make of this?
#1
Guest
Posts: n/a
What do you guys make of this?
Please take a look at this:
http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
That vacuum line connects 2 vacuum points on the intake manifold to
each other. Here's another shot where you can see the whole vacuum
line:
http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
I don't see the point in that line. Should I be able to just plug up
each vacuum fitting on the manifold and get rid of that line, or is it
actually trying to perform some kind of useful function? Thank you.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
That vacuum line connects 2 vacuum points on the intake manifold to
each other. Here's another shot where you can see the whole vacuum
line:
http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
I don't see the point in that line. Should I be able to just plug up
each vacuum fitting on the manifold and get rid of that line, or is it
actually trying to perform some kind of useful function? Thank you.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#2
Guest
Posts: n/a
Re: What do you guys make of this?
"travis" <travist34removethis@hotmail.com> wrote in message
news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com...
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
If both ends of the hose are connected to the manifold, like it looks like
it is, then you can cap them both off and get rid of the hose, its not doing
anything useful. Just another place to develop a leak.
Nice Jeep BTW.
Chris
news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com...
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
If both ends of the hose are connected to the manifold, like it looks like
it is, then you can cap them both off and get rid of the hose, its not doing
anything useful. Just another place to develop a leak.
Nice Jeep BTW.
Chris
#3
Guest
Posts: n/a
Re: What do you guys make of this?
"travis" <travist34removethis@hotmail.com> wrote in message
news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com...
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
If both ends of the hose are connected to the manifold, like it looks like
it is, then you can cap them both off and get rid of the hose, its not doing
anything useful. Just another place to develop a leak.
Nice Jeep BTW.
Chris
news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com...
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
If both ends of the hose are connected to the manifold, like it looks like
it is, then you can cap them both off and get rid of the hose, its not doing
anything useful. Just another place to develop a leak.
Nice Jeep BTW.
Chris
#4
Guest
Posts: n/a
Re: What do you guys make of this?
"travis" <travist34removethis@hotmail.com> wrote in message
news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com...
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
If both ends of the hose are connected to the manifold, like it looks like
it is, then you can cap them both off and get rid of the hose, its not doing
anything useful. Just another place to develop a leak.
Nice Jeep BTW.
Chris
news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com...
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
If both ends of the hose are connected to the manifold, like it looks like
it is, then you can cap them both off and get rid of the hose, its not doing
anything useful. Just another place to develop a leak.
Nice Jeep BTW.
Chris
#5
Guest
Posts: n/a
Re: What do you guys make of this?
On Sun, 19 Oct 2003 22:35:47 GMT, "c" <c@me.org> shared the
following:
>"travis" <travist34removethis@hotmail.com> wrote in message
>news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com.. .
>> Please take a look at this:
>> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
>> That vacuum line connects 2 vacuum points on the intake manifold to
>> each other. Here's another shot where you can see the whole vacuum
>> line:
>> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
>> I don't see the point in that line. Should I be able to just plug up
>> each vacuum fitting on the manifold and get rid of that line, or is it
>> actually trying to perform some kind of useful function? Thank you.
>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
>
>If both ends of the hose are connected to the manifold, like it looks like
>it is, then you can cap them both off and get rid of the hose, its not doing
>anything useful. Just another place to develop a leak.
Thank you. That's what I suspected. The rear connection came loose
today and my idle got rough... I'll cap both ends off and be done
with it.
>
>Nice Jeep BTW.
>Chris
>
Thank you. :-) I'm enjoying it already. Took it offroad today and
got some pretty good pictures that I'll try to post tomorrow night.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
following:
>"travis" <travist34removethis@hotmail.com> wrote in message
>news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com.. .
>> Please take a look at this:
>> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
>> That vacuum line connects 2 vacuum points on the intake manifold to
>> each other. Here's another shot where you can see the whole vacuum
>> line:
>> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
>> I don't see the point in that line. Should I be able to just plug up
>> each vacuum fitting on the manifold and get rid of that line, or is it
>> actually trying to perform some kind of useful function? Thank you.
>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
>
>If both ends of the hose are connected to the manifold, like it looks like
>it is, then you can cap them both off and get rid of the hose, its not doing
>anything useful. Just another place to develop a leak.
Thank you. That's what I suspected. The rear connection came loose
today and my idle got rough... I'll cap both ends off and be done
with it.
>
>Nice Jeep BTW.
>Chris
>
Thank you. :-) I'm enjoying it already. Took it offroad today and
got some pretty good pictures that I'll try to post tomorrow night.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#6
Guest
Posts: n/a
Re: What do you guys make of this?
On Sun, 19 Oct 2003 22:35:47 GMT, "c" <c@me.org> shared the
following:
>"travis" <travist34removethis@hotmail.com> wrote in message
>news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com.. .
>> Please take a look at this:
>> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
>> That vacuum line connects 2 vacuum points on the intake manifold to
>> each other. Here's another shot where you can see the whole vacuum
>> line:
>> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
>> I don't see the point in that line. Should I be able to just plug up
>> each vacuum fitting on the manifold and get rid of that line, or is it
>> actually trying to perform some kind of useful function? Thank you.
>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
>
>If both ends of the hose are connected to the manifold, like it looks like
>it is, then you can cap them both off and get rid of the hose, its not doing
>anything useful. Just another place to develop a leak.
Thank you. That's what I suspected. The rear connection came loose
today and my idle got rough... I'll cap both ends off and be done
with it.
>
>Nice Jeep BTW.
>Chris
>
Thank you. :-) I'm enjoying it already. Took it offroad today and
got some pretty good pictures that I'll try to post tomorrow night.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
following:
>"travis" <travist34removethis@hotmail.com> wrote in message
>news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com.. .
>> Please take a look at this:
>> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
>> That vacuum line connects 2 vacuum points on the intake manifold to
>> each other. Here's another shot where you can see the whole vacuum
>> line:
>> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
>> I don't see the point in that line. Should I be able to just plug up
>> each vacuum fitting on the manifold and get rid of that line, or is it
>> actually trying to perform some kind of useful function? Thank you.
>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
>
>If both ends of the hose are connected to the manifold, like it looks like
>it is, then you can cap them both off and get rid of the hose, its not doing
>anything useful. Just another place to develop a leak.
Thank you. That's what I suspected. The rear connection came loose
today and my idle got rough... I'll cap both ends off and be done
with it.
>
>Nice Jeep BTW.
>Chris
>
Thank you. :-) I'm enjoying it already. Took it offroad today and
got some pretty good pictures that I'll try to post tomorrow night.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#7
Guest
Posts: n/a
Re: What do you guys make of this?
On Sun, 19 Oct 2003 22:35:47 GMT, "c" <c@me.org> shared the
following:
>"travis" <travist34removethis@hotmail.com> wrote in message
>news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com.. .
>> Please take a look at this:
>> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
>> That vacuum line connects 2 vacuum points on the intake manifold to
>> each other. Here's another shot where you can see the whole vacuum
>> line:
>> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
>> I don't see the point in that line. Should I be able to just plug up
>> each vacuum fitting on the manifold and get rid of that line, or is it
>> actually trying to perform some kind of useful function? Thank you.
>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
>
>If both ends of the hose are connected to the manifold, like it looks like
>it is, then you can cap them both off and get rid of the hose, its not doing
>anything useful. Just another place to develop a leak.
Thank you. That's what I suspected. The rear connection came loose
today and my idle got rough... I'll cap both ends off and be done
with it.
>
>Nice Jeep BTW.
>Chris
>
Thank you. :-) I'm enjoying it already. Took it offroad today and
got some pretty good pictures that I'll try to post tomorrow night.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
following:
>"travis" <travist34removethis@hotmail.com> wrote in message
>news:i336pv89ab3u7qm8gqqf7kqdgbunorjjta@4ax.com.. .
>> Please take a look at this:
>> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
>> That vacuum line connects 2 vacuum points on the intake manifold to
>> each other. Here's another shot where you can see the whole vacuum
>> line:
>> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
>> I don't see the point in that line. Should I be able to just plug up
>> each vacuum fitting on the manifold and get rid of that line, or is it
>> actually trying to perform some kind of useful function? Thank you.
>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
>
>If both ends of the hose are connected to the manifold, like it looks like
>it is, then you can cap them both off and get rid of the hose, its not doing
>anything useful. Just another place to develop a leak.
Thank you. That's what I suspected. The rear connection came loose
today and my idle got rough... I'll cap both ends off and be done
with it.
>
>Nice Jeep BTW.
>Chris
>
Thank you. :-) I'm enjoying it already. Took it offroad today and
got some pretty good pictures that I'll try to post tomorrow night.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#8
Guest
Posts: n/a
Re: What do you guys make of this?
The seller had an aquarium, but no rubber caps:
http://www.----------.com/rubbercaps.jpg
I hope you don't have to pass SMOG, cause it'll never happen with
450 CFM Holley.
God Bless America, ßill O|||||||O
mailto:--------------------
travis wrote:
>
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
http://www.----------.com/rubbercaps.jpg
I hope you don't have to pass SMOG, cause it'll never happen with
450 CFM Holley.
God Bless America, ßill O|||||||O
mailto:--------------------
travis wrote:
>
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
#9
Guest
Posts: n/a
Re: What do you guys make of this?
The seller had an aquarium, but no rubber caps:
http://www.----------.com/rubbercaps.jpg
I hope you don't have to pass SMOG, cause it'll never happen with
450 CFM Holley.
God Bless America, ßill O|||||||O
mailto:--------------------
travis wrote:
>
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
http://www.----------.com/rubbercaps.jpg
I hope you don't have to pass SMOG, cause it'll never happen with
450 CFM Holley.
God Bless America, ßill O|||||||O
mailto:--------------------
travis wrote:
>
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
#10
Guest
Posts: n/a
Re: What do you guys make of this?
The seller had an aquarium, but no rubber caps:
http://www.----------.com/rubbercaps.jpg
I hope you don't have to pass SMOG, cause it'll never happen with
450 CFM Holley.
God Bless America, ßill O|||||||O
mailto:--------------------
travis wrote:
>
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
http://www.----------.com/rubbercaps.jpg
I hope you don't have to pass SMOG, cause it'll never happen with
450 CFM Holley.
God Bless America, ßill O|||||||O
mailto:--------------------
travis wrote:
>
> Please take a look at this:
> http://jeepadventures.dyndns.org/jeep/dayone/24.jpg
> That vacuum line connects 2 vacuum points on the intake manifold to
> each other. Here's another shot where you can see the whole vacuum
> line:
> http://jeepadventures.dyndns.org/jeep/dayone/23.jpg
> I don't see the point in that line. Should I be able to just plug up
> each vacuum fitting on the manifold and get rid of that line, or is it
> actually trying to perform some kind of useful function? Thank you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!