note: if you have to glue up the plastic fiddly bits
JB weld will not hold on some plastics. Generally I get
good results with the stuff, but not this time.

Tried a bit on the AC **** and it hardens well, just doesn't
stick. Got to be the type of plastic. The only two that
JB doesn't stick to are Polypropylene and Polyethylene. So
it's got to be Polypropylene. The other is plastic sheeting stuff.

Oh well, off to get some 3M epoxy for polypropylene.

--
DougW
I have found that with much effort most all adhesives can bond
skin, denim, and hair.

 

Try Gorilla Glue, that stuff is pretty amazing. It sticks things
together like iron that nothing else I tried worked on. Plastics,
metal, ceramics, wood, etc.



DougW wrote:
> note: if you have to glue up the plastic fiddly bits
> JB weld will not hold on some plastics. Generally I get
> good results with the stuff, but not this time.
>
> Tried a bit on the AC **** and it hardens well, just doesn't
> stick. Got to be the type of plastic. The only two that
> JB doesn't stick to are Polypropylene and Polyethylene. So
> it's got to be Polypropylene. The other is plastic sheeting stuff.
>
> Oh well, off to get some 3M epoxy for polypropylene.
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/

 

Try Gorilla Glue, that stuff is pretty amazing. It sticks things
together like iron that nothing else I tried worked on. Plastics,
metal, ceramics, wood, etc.



DougW wrote:
> note: if you have to glue up the plastic fiddly bits
> JB weld will not hold on some plastics. Generally I get
> good results with the stuff, but not this time.
>
> Tried a bit on the AC **** and it hardens well, just doesn't
> stick. Got to be the type of plastic. The only two that
> JB doesn't stick to are Polypropylene and Polyethylene. So
> it's got to be Polypropylene. The other is plastic sheeting stuff.
>
> Oh well, off to get some 3M epoxy for polypropylene.
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/

 

Try Gorilla Glue, that stuff is pretty amazing. It sticks things
together like iron that nothing else I tried worked on. Plastics,
metal, ceramics, wood, etc.



DougW wrote:
> note: if you have to glue up the plastic fiddly bits
> JB weld will not hold on some plastics. Generally I get
> good results with the stuff, but not this time.
>
> Tried a bit on the AC **** and it hardens well, just doesn't
> stick. Got to be the type of plastic. The only two that
> JB doesn't stick to are Polypropylene and Polyethylene. So
> it's got to be Polypropylene. The other is plastic sheeting stuff.
>
> Oh well, off to get some 3M epoxy for polypropylene.
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/

 

I've used Gorilla Glue on plastic and it worked well. The repair is ugly
because it "foams' as it cures but holds tenaciously.

Make sure you do not get it on your skin as it will stay until that layer of
skin sloughs off.



"Jerry Bransford" <jerrypb@***.net> wrote in message
news:UuGsf.1535$V.1057@fed1read04...
> Try Gorilla Glue, that stuff is pretty amazing. It sticks things together
> like iron that nothing else I tried worked on. Plastics, metal, ceramics,
> wood, etc.
>
>
>
> DougW wrote:
>> note: if you have to glue up the plastic fiddly bits
>> JB weld will not hold on some plastics. Generally I get
>> good results with the stuff, but not this time.
>>
>> Tried a bit on the AC **** and it hardens well, just doesn't
>> stick. Got to be the type of plastic. The only two that
>> JB doesn't stick to are Polypropylene and Polyethylene. So
>> it's got to be Polypropylene. The other is plastic sheeting stuff.
>>
>> Oh well, off to get some 3M epoxy for polypropylene.
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/

 

I've used Gorilla Glue on plastic and it worked well. The repair is ugly
because it "foams' as it cures but holds tenaciously.

Make sure you do not get it on your skin as it will stay until that layer of
skin sloughs off.



"Jerry Bransford" <jerrypb@***.net> wrote in message
news:UuGsf.1535$V.1057@fed1read04...
> Try Gorilla Glue, that stuff is pretty amazing. It sticks things together
> like iron that nothing else I tried worked on. Plastics, metal, ceramics,
> wood, etc.
>
>
>
> DougW wrote:
>> note: if you have to glue up the plastic fiddly bits
>> JB weld will not hold on some plastics. Generally I get
>> good results with the stuff, but not this time.
>>
>> Tried a bit on the AC **** and it hardens well, just doesn't
>> stick. Got to be the type of plastic. The only two that
>> JB doesn't stick to are Polypropylene and Polyethylene. So
>> it's got to be Polypropylene. The other is plastic sheeting stuff.
>>
>> Oh well, off to get some 3M epoxy for polypropylene.
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/

 

I've used Gorilla Glue on plastic and it worked well. The repair is ugly
because it "foams' as it cures but holds tenaciously.

Make sure you do not get it on your skin as it will stay until that layer of
skin sloughs off.



"Jerry Bransford" <jerrypb@***.net> wrote in message
news:UuGsf.1535$V.1057@fed1read04...
> Try Gorilla Glue, that stuff is pretty amazing. It sticks things together
> like iron that nothing else I tried worked on. Plastics, metal, ceramics,
> wood, etc.
>
>
>
> DougW wrote:
>> note: if you have to glue up the plastic fiddly bits
>> JB weld will not hold on some plastics. Generally I get
>> good results with the stuff, but not this time.
>>
>> Tried a bit on the AC **** and it hardens well, just doesn't
>> stick. Got to be the type of plastic. The only two that
>> JB doesn't stick to are Polypropylene and Polyethylene. So
>> it's got to be Polypropylene. The other is plastic sheeting stuff.
>>
>> Oh well, off to get some 3M epoxy for polypropylene.
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/

 

billy ray did pass the time by typing:
> I've used Gorilla Glue on plastic and it worked well. The repair is ugly
> because it "foams' as it cures but holds tenaciously.

That should be ok because it's on the backside of the ****. A bit of masking
tape should keep things "clean".

> Make sure you do not get it on your skin as it will stay until that layer of
> skin sloughs off.

I've got an angle grinder and brush wheel that can take anything off skin. :]

> "Jerry Bransford" wrote ...
>> Try Gorilla Glue, that stuff is pretty amazing. It sticks things together
>> like iron that nothing else I tried worked on. Plastics, metal, ceramics,
>> wood, etc.

Thanks

--
DougW

 

billy ray did pass the time by typing:
> I've used Gorilla Glue on plastic and it worked well. The repair is ugly
> because it "foams' as it cures but holds tenaciously.

That should be ok because it's on the backside of the ****. A bit of masking
tape should keep things "clean".

> Make sure you do not get it on your skin as it will stay until that layer of
> skin sloughs off.

I've got an angle grinder and brush wheel that can take anything off skin. :]

> "Jerry Bransford" wrote ...
>> Try Gorilla Glue, that stuff is pretty amazing. It sticks things together
>> like iron that nothing else I tried worked on. Plastics, metal, ceramics,
>> wood, etc.

Thanks

--
DougW

 

billy ray did pass the time by typing:
> I've used Gorilla Glue on plastic and it worked well. The repair is ugly
> because it "foams' as it cures but holds tenaciously.

That should be ok because it's on the backside of the ****. A bit of masking
tape should keep things "clean".

> Make sure you do not get it on your skin as it will stay until that layer of
> skin sloughs off.

I've got an angle grinder and brush wheel that can take anything off skin. :]

> "Jerry Bransford" wrote ...
>> Try Gorilla Glue, that stuff is pretty amazing. It sticks things together
>> like iron that nothing else I tried worked on. Plastics, metal, ceramics,
>> wood, etc.

Thanks

--
DougW