Warn bumper
11-29-2004, 03:58 PM
#1
Guest
Posts: n/a
Warn bumper
97 Wrangler
Has anyone mounted a license plate to a front Warn rock crawler bumper? I
just put the warn on and I'm without my license plate right now. I don't
want johnny law pulling me over for it. Yes it is required in TX.
What ideas do y'all have for the exposed frame on the front of the Jeep
after installing Warn bumper and winch? It used to be hidden by the plastic
Jeep cover, but now, there is some dirty steel showing around the sides of
the winch.
Also, anyone around Dallas in need of a factory aluminum bumper and
aforementioned plastic cover? How about a not so hot black soft top? It
has 1 unrepaired tear in it, but it works if you needed something for a
beater TJ. Are TJ's old enough for there to be beaters lying around? All
items real cheap.
Thanks,
Has anyone mounted a license plate to a front Warn rock crawler bumper? I
just put the warn on and I'm without my license plate right now. I don't
want johnny law pulling me over for it. Yes it is required in TX.
What ideas do y'all have for the exposed frame on the front of the Jeep
after installing Warn bumper and winch? It used to be hidden by the plastic
Jeep cover, but now, there is some dirty steel showing around the sides of
the winch.
Also, anyone around Dallas in need of a factory aluminum bumper and
aforementioned plastic cover? How about a not so hot black soft top? It
has 1 unrepaired tear in it, but it works if you needed something for a
beater TJ. Are TJ's old enough for there to be beaters lying around? All
items real cheap.
Thanks,
11-29-2004, 04:10 PM
#2
Guest
Posts: n/a
Re: Warn bumper
Not real familiar with your bumper but maybe this?
http://www.quadratec.com/cgi-bin/sgi...04112916020712
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Dennis ***" wrote in message...
> 97 Wrangler
> Has anyone mounted a license plate to a front Warn rock crawler bumper? I
> just put the warn on and I'm without my license plate right now. I don't
> want johnny law pulling me over for it. Yes it is required in TX.
>
> What ideas do y'all have for the exposed frame on the front of the Jeep
> after installing Warn bumper and winch? It used to be hidden by the
> plastic Jeep cover, but now, there is some dirty steel showing around the
> sides of the winch.
>
> Also, anyone around Dallas in need of a factory aluminum bumper and
> aforementioned plastic cover? How about a not so hot black soft top? It
> has 1 unrepaired tear in it, but it works if you needed something for a
> beater TJ. Are TJ's old enough for there to be beaters lying around? All
> items real cheap.
>
> Thanks,
>
http://www.quadratec.com/cgi-bin/sgi...04112916020712
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Dennis ***" wrote in message...
> 97 Wrangler
> Has anyone mounted a license plate to a front Warn rock crawler bumper? I
> just put the warn on and I'm without my license plate right now. I don't
> want johnny law pulling me over for it. Yes it is required in TX.
>
> What ideas do y'all have for the exposed frame on the front of the Jeep
> after installing Warn bumper and winch? It used to be hidden by the
> plastic Jeep cover, but now, there is some dirty steel showing around the
> sides of the winch.
>
> Also, anyone around Dallas in need of a factory aluminum bumper and
> aforementioned plastic cover? How about a not so hot black soft top? It
> has 1 unrepaired tear in it, but it works if you needed something for a
> beater TJ. Are TJ's old enough for there to be beaters lying around? All
> items real cheap.
>
> Thanks,
>
11-29-2004, 04:10 PM
#3
Guest
Posts: n/a
Re: Warn bumper
Not real familiar with your bumper but maybe this?
http://www.quadratec.com/cgi-bin/sgi...04112916020712
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Dennis ***" wrote in message...
> 97 Wrangler
> Has anyone mounted a license plate to a front Warn rock crawler bumper? I
> just put the warn on and I'm without my license plate right now. I don't
> want johnny law pulling me over for it. Yes it is required in TX.
>
> What ideas do y'all have for the exposed frame on the front of the Jeep
> after installing Warn bumper and winch? It used to be hidden by the
> plastic Jeep cover, but now, there is some dirty steel showing around the
> sides of the winch.
>
> Also, anyone around Dallas in need of a factory aluminum bumper and
> aforementioned plastic cover? How about a not so hot black soft top? It
> has 1 unrepaired tear in it, but it works if you needed something for a
> beater TJ. Are TJ's old enough for there to be beaters lying around? All
> items real cheap.
>
> Thanks,
>
http://www.quadratec.com/cgi-bin/sgi...04112916020712
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Dennis ***" wrote in message...
> 97 Wrangler
> Has anyone mounted a license plate to a front Warn rock crawler bumper? I
> just put the warn on and I'm without my license plate right now. I don't
> want johnny law pulling me over for it. Yes it is required in TX.
>
> What ideas do y'all have for the exposed frame on the front of the Jeep
> after installing Warn bumper and winch? It used to be hidden by the
> plastic Jeep cover, but now, there is some dirty steel showing around the
> sides of the winch.
>
> Also, anyone around Dallas in need of a factory aluminum bumper and
> aforementioned plastic cover? How about a not so hot black soft top? It
> has 1 unrepaired tear in it, but it works if you needed something for a
> beater TJ. Are TJ's old enough for there to be beaters lying around? All
> items real cheap.
>
> Thanks,
>
11-29-2004, 04:10 PM
#4
Guest
Posts: n/a
Re: Warn bumper
Not real familiar with your bumper but maybe this?
http://www.quadratec.com/cgi-bin/sgi...04112916020712
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Dennis ***" wrote in message...
> 97 Wrangler
> Has anyone mounted a license plate to a front Warn rock crawler bumper? I
> just put the warn on and I'm without my license plate right now. I don't
> want johnny law pulling me over for it. Yes it is required in TX.
>
> What ideas do y'all have for the exposed frame on the front of the Jeep
> after installing Warn bumper and winch? It used to be hidden by the
> plastic Jeep cover, but now, there is some dirty steel showing around the
> sides of the winch.
>
> Also, anyone around Dallas in need of a factory aluminum bumper and
> aforementioned plastic cover? How about a not so hot black soft top? It
> has 1 unrepaired tear in it, but it works if you needed something for a
> beater TJ. Are TJ's old enough for there to be beaters lying around? All
> items real cheap.
>
> Thanks,
>
http://www.quadratec.com/cgi-bin/sgi...04112916020712
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Dennis ***" wrote in message...
> 97 Wrangler
> Has anyone mounted a license plate to a front Warn rock crawler bumper? I
> just put the warn on and I'm without my license plate right now. I don't
> want johnny law pulling me over for it. Yes it is required in TX.
>
> What ideas do y'all have for the exposed frame on the front of the Jeep
> after installing Warn bumper and winch? It used to be hidden by the
> plastic Jeep cover, but now, there is some dirty steel showing around the
> sides of the winch.
>
> Also, anyone around Dallas in need of a factory aluminum bumper and
> aforementioned plastic cover? How about a not so hot black soft top? It
> has 1 unrepaired tear in it, but it works if you needed something for a
> beater TJ. Are TJ's old enough for there to be beaters lying around? All
> items real cheap.
>
> Thanks,
>
11-29-2004, 04:33 PM
#5
Guest
Posts: n/a
Re: Warn bumper
Do you have a roller fairlead? If so I have seen folks use a chunk of
PCV pipe with 1/4 of it cut out lengthwise along the back. This clips
on the roller when on the road and can be removed for winch use.
Only downside I see is air flow restriction to the rad.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Dennis *** wrote:
>
> 97 Wrangler
> Has anyone mounted a license plate to a front Warn rock crawler bumper? I
> just put the warn on and I'm without my license plate right now. I don't
> want johnny law pulling me over for it. Yes it is required in TX.
>
> What ideas do y'all have for the exposed frame on the front of the Jeep
> after installing Warn bumper and winch? It used to be hidden by the plastic
> Jeep cover, but now, there is some dirty steel showing around the sides of
> the winch.
>
> Also, anyone around Dallas in need of a factory aluminum bumper and
> aforementioned plastic cover? How about a not so hot black soft top? It
> has 1 unrepaired tear in it, but it works if you needed something for a
> beater TJ. Are TJ's old enough for there to be beaters lying around? All
> items real cheap.
>
> Thanks,
PCV pipe with 1/4 of it cut out lengthwise along the back. This clips
on the roller when on the road and can be removed for winch use.
Only downside I see is air flow restriction to the rad.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Dennis *** wrote:
>
> 97 Wrangler
> Has anyone mounted a license plate to a front Warn rock crawler bumper? I
> just put the warn on and I'm without my license plate right now. I don't
> want johnny law pulling me over for it. Yes it is required in TX.
>
> What ideas do y'all have for the exposed frame on the front of the Jeep
> after installing Warn bumper and winch? It used to be hidden by the plastic
> Jeep cover, but now, there is some dirty steel showing around the sides of
> the winch.
>
> Also, anyone around Dallas in need of a factory aluminum bumper and
> aforementioned plastic cover? How about a not so hot black soft top? It
> has 1 unrepaired tear in it, but it works if you needed something for a
> beater TJ. Are TJ's old enough for there to be beaters lying around? All
> items real cheap.
>
> Thanks,
11-29-2004, 04:33 PM
#6
Guest
Posts: n/a
Re: Warn bumper
Do you have a roller fairlead? If so I have seen folks use a chunk of
PCV pipe with 1/4 of it cut out lengthwise along the back. This clips
on the roller when on the road and can be removed for winch use.
Only downside I see is air flow restriction to the rad.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Dennis *** wrote:
>
> 97 Wrangler
> Has anyone mounted a license plate to a front Warn rock crawler bumper? I
> just put the warn on and I'm without my license plate right now. I don't
> want johnny law pulling me over for it. Yes it is required in TX.
>
> What ideas do y'all have for the exposed frame on the front of the Jeep
> after installing Warn bumper and winch? It used to be hidden by the plastic
> Jeep cover, but now, there is some dirty steel showing around the sides of
> the winch.
>
> Also, anyone around Dallas in need of a factory aluminum bumper and
> aforementioned plastic cover? How about a not so hot black soft top? It
> has 1 unrepaired tear in it, but it works if you needed something for a
> beater TJ. Are TJ's old enough for there to be beaters lying around? All
> items real cheap.
>
> Thanks,
PCV pipe with 1/4 of it cut out lengthwise along the back. This clips
on the roller when on the road and can be removed for winch use.
Only downside I see is air flow restriction to the rad.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Dennis *** wrote:
>
> 97 Wrangler
> Has anyone mounted a license plate to a front Warn rock crawler bumper? I
> just put the warn on and I'm without my license plate right now. I don't
> want johnny law pulling me over for it. Yes it is required in TX.
>
> What ideas do y'all have for the exposed frame on the front of the Jeep
> after installing Warn bumper and winch? It used to be hidden by the plastic
> Jeep cover, but now, there is some dirty steel showing around the sides of
> the winch.
>
> Also, anyone around Dallas in need of a factory aluminum bumper and
> aforementioned plastic cover? How about a not so hot black soft top? It
> has 1 unrepaired tear in it, but it works if you needed something for a
> beater TJ. Are TJ's old enough for there to be beaters lying around? All
> items real cheap.
>
> Thanks,
11-29-2004, 04:33 PM
#7
Guest
Posts: n/a
Re: Warn bumper
Do you have a roller fairlead? If so I have seen folks use a chunk of
PCV pipe with 1/4 of it cut out lengthwise along the back. This clips
on the roller when on the road and can be removed for winch use.
Only downside I see is air flow restriction to the rad.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Dennis *** wrote:
>
> 97 Wrangler
> Has anyone mounted a license plate to a front Warn rock crawler bumper? I
> just put the warn on and I'm without my license plate right now. I don't
> want johnny law pulling me over for it. Yes it is required in TX.
>
> What ideas do y'all have for the exposed frame on the front of the Jeep
> after installing Warn bumper and winch? It used to be hidden by the plastic
> Jeep cover, but now, there is some dirty steel showing around the sides of
> the winch.
>
> Also, anyone around Dallas in need of a factory aluminum bumper and
> aforementioned plastic cover? How about a not so hot black soft top? It
> has 1 unrepaired tear in it, but it works if you needed something for a
> beater TJ. Are TJ's old enough for there to be beaters lying around? All
> items real cheap.
>
> Thanks,
PCV pipe with 1/4 of it cut out lengthwise along the back. This clips
on the roller when on the road and can be removed for winch use.
Only downside I see is air flow restriction to the rad.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Dennis *** wrote:
>
> 97 Wrangler
> Has anyone mounted a license plate to a front Warn rock crawler bumper? I
> just put the warn on and I'm without my license plate right now. I don't
> want johnny law pulling me over for it. Yes it is required in TX.
>
> What ideas do y'all have for the exposed frame on the front of the Jeep
> after installing Warn bumper and winch? It used to be hidden by the plastic
> Jeep cover, but now, there is some dirty steel showing around the sides of
> the winch.
>
> Also, anyone around Dallas in need of a factory aluminum bumper and
> aforementioned plastic cover? How about a not so hot black soft top? It
> has 1 unrepaired tear in it, but it works if you needed something for a
> beater TJ. Are TJ's old enough for there to be beaters lying around? All
> items real cheap.
>
> Thanks,
11-29-2004, 04:49 PM
#8
Guest
Posts: n/a
Re: Warn bumper
interesting idea. I don't have a tube bumper, but a couple of small
brackets might do the trick.
tks
"JimG" <JimG@nospam.com> wrote in message
news:NeMqd.5160$h_1.1547@news02.roc.ny...
> Not real familiar with your bumper but maybe this?
> http://www.quadratec.com/cgi-bin/sgi...04112916020712
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> 4.56 Gears, TrueTrac rear
> 33" BFG AT on 15x8 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
>
> "Dennis ***" wrote in message...
>> 97 Wrangler
>> Has anyone mounted a license plate to a front Warn rock crawler bumper?
>> I just put the warn on and I'm without my license plate right now. I
>> don't want johnny law pulling me over for it. Yes it is required in TX.
>>
>> What ideas do y'all have for the exposed frame on the front of the Jeep
>> after installing Warn bumper and winch? It used to be hidden by the
>> plastic Jeep cover, but now, there is some dirty steel showing around the
>> sides of the winch.
>>
>> Also, anyone around Dallas in need of a factory aluminum bumper and
>> aforementioned plastic cover? How about a not so hot black soft top? It
>> has 1 unrepaired tear in it, but it works if you needed something for a
>> beater TJ. Are TJ's old enough for there to be beaters lying around?
>> All items real cheap.
>>
>> Thanks,
>>
>
>
brackets might do the trick.
tks
"JimG" <JimG@nospam.com> wrote in message
news:NeMqd.5160$h_1.1547@news02.roc.ny...
> Not real familiar with your bumper but maybe this?
> http://www.quadratec.com/cgi-bin/sgi...04112916020712
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> 4.56 Gears, TrueTrac rear
> 33" BFG AT on 15x8 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
>
> "Dennis ***" wrote in message...
>> 97 Wrangler
>> Has anyone mounted a license plate to a front Warn rock crawler bumper?
>> I just put the warn on and I'm without my license plate right now. I
>> don't want johnny law pulling me over for it. Yes it is required in TX.
>>
>> What ideas do y'all have for the exposed frame on the front of the Jeep
>> after installing Warn bumper and winch? It used to be hidden by the
>> plastic Jeep cover, but now, there is some dirty steel showing around the
>> sides of the winch.
>>
>> Also, anyone around Dallas in need of a factory aluminum bumper and
>> aforementioned plastic cover? How about a not so hot black soft top? It
>> has 1 unrepaired tear in it, but it works if you needed something for a
>> beater TJ. Are TJ's old enough for there to be beaters lying around?
>> All items real cheap.
>>
>> Thanks,
>>
>
>
11-29-2004, 04:49 PM
#9
Guest
Posts: n/a
Re: Warn bumper
interesting idea. I don't have a tube bumper, but a couple of small
brackets might do the trick.
tks
"JimG" <JimG@nospam.com> wrote in message
news:NeMqd.5160$h_1.1547@news02.roc.ny...
> Not real familiar with your bumper but maybe this?
> http://www.quadratec.com/cgi-bin/sgi...04112916020712
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> 4.56 Gears, TrueTrac rear
> 33" BFG AT on 15x8 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
>
> "Dennis ***" wrote in message...
>> 97 Wrangler
>> Has anyone mounted a license plate to a front Warn rock crawler bumper?
>> I just put the warn on and I'm without my license plate right now. I
>> don't want johnny law pulling me over for it. Yes it is required in TX.
>>
>> What ideas do y'all have for the exposed frame on the front of the Jeep
>> after installing Warn bumper and winch? It used to be hidden by the
>> plastic Jeep cover, but now, there is some dirty steel showing around the
>> sides of the winch.
>>
>> Also, anyone around Dallas in need of a factory aluminum bumper and
>> aforementioned plastic cover? How about a not so hot black soft top? It
>> has 1 unrepaired tear in it, but it works if you needed something for a
>> beater TJ. Are TJ's old enough for there to be beaters lying around?
>> All items real cheap.
>>
>> Thanks,
>>
>
>
brackets might do the trick.
tks
"JimG" <JimG@nospam.com> wrote in message
news:NeMqd.5160$h_1.1547@news02.roc.ny...
> Not real familiar with your bumper but maybe this?
> http://www.quadratec.com/cgi-bin/sgi...04112916020712
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> 4.56 Gears, TrueTrac rear
> 33" BFG AT on 15x8 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
>
> "Dennis ***" wrote in message...
>> 97 Wrangler
>> Has anyone mounted a license plate to a front Warn rock crawler bumper?
>> I just put the warn on and I'm without my license plate right now. I
>> don't want johnny law pulling me over for it. Yes it is required in TX.
>>
>> What ideas do y'all have for the exposed frame on the front of the Jeep
>> after installing Warn bumper and winch? It used to be hidden by the
>> plastic Jeep cover, but now, there is some dirty steel showing around the
>> sides of the winch.
>>
>> Also, anyone around Dallas in need of a factory aluminum bumper and
>> aforementioned plastic cover? How about a not so hot black soft top? It
>> has 1 unrepaired tear in it, but it works if you needed something for a
>> beater TJ. Are TJ's old enough for there to be beaters lying around?
>> All items real cheap.
>>
>> Thanks,
>>
>
>
11-29-2004, 04:49 PM
#10
Guest
Posts: n/a
Re: Warn bumper
interesting idea. I don't have a tube bumper, but a couple of small
brackets might do the trick.
tks
"JimG" <JimG@nospam.com> wrote in message
news:NeMqd.5160$h_1.1547@news02.roc.ny...
> Not real familiar with your bumper but maybe this?
> http://www.quadratec.com/cgi-bin/sgi...04112916020712
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> 4.56 Gears, TrueTrac rear
> 33" BFG AT on 15x8 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
>
> "Dennis ***" wrote in message...
>> 97 Wrangler
>> Has anyone mounted a license plate to a front Warn rock crawler bumper?
>> I just put the warn on and I'm without my license plate right now. I
>> don't want johnny law pulling me over for it. Yes it is required in TX.
>>
>> What ideas do y'all have for the exposed frame on the front of the Jeep
>> after installing Warn bumper and winch? It used to be hidden by the
>> plastic Jeep cover, but now, there is some dirty steel showing around the
>> sides of the winch.
>>
>> Also, anyone around Dallas in need of a factory aluminum bumper and
>> aforementioned plastic cover? How about a not so hot black soft top? It
>> has 1 unrepaired tear in it, but it works if you needed something for a
>> beater TJ. Are TJ's old enough for there to be beaters lying around?
>> All items real cheap.
>>
>> Thanks,
>>
>
>
brackets might do the trick.
tks
"JimG" <JimG@nospam.com> wrote in message
news:NeMqd.5160$h_1.1547@news02.roc.ny...
> Not real familiar with your bumper but maybe this?
> http://www.quadratec.com/cgi-bin/sgi...04112916020712
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> 4.56 Gears, TrueTrac rear
> 33" BFG AT on 15x8 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
>
> "Dennis ***" wrote in message...
>> 97 Wrangler
>> Has anyone mounted a license plate to a front Warn rock crawler bumper?
>> I just put the warn on and I'm without my license plate right now. I
>> don't want johnny law pulling me over for it. Yes it is required in TX.
>>
>> What ideas do y'all have for the exposed frame on the front of the Jeep
>> after installing Warn bumper and winch? It used to be hidden by the
>> plastic Jeep cover, but now, there is some dirty steel showing around the
>> sides of the winch.
>>
>> Also, anyone around Dallas in need of a factory aluminum bumper and
>> aforementioned plastic cover? How about a not so hot black soft top? It
>> has 1 unrepaired tear in it, but it works if you needed something for a
>> beater TJ. Are TJ's old enough for there to be beaters lying around?
>> All items real cheap.
>>
>> Thanks,
>>
>
>
