Vibration??
#11
Guest
Posts: n/a
Re: Vibration??
Ya coulda thrown a balance weight. Have your DS rebalanced.
Scott
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1143040752.668275.6890@t31g2000cwb.googlegrou ps.com...
>I have a '88 YJ with the Dana 30 front end with a locker. I have been
> noticing a vibration lately when I get up to freeway speeds. So, I
> checked my front U-joints the other day and felt quite a bit of slop.
> So, I pulled the front driveline. I went for a drive without the front
> driveline and noticed the vibration was gone. Wahoo! So, I figured it
> was the u-joints and replaced both of them. I put the driveline back
> in and now I have the same vibration. What now? I suspect the bearing
> on the outputshaft of the trasfer case. What do you guys think? Are
> these hard to replace?
>
Scott
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1143040752.668275.6890@t31g2000cwb.googlegrou ps.com...
>I have a '88 YJ with the Dana 30 front end with a locker. I have been
> noticing a vibration lately when I get up to freeway speeds. So, I
> checked my front U-joints the other day and felt quite a bit of slop.
> So, I pulled the front driveline. I went for a drive without the front
> driveline and noticed the vibration was gone. Wahoo! So, I figured it
> was the u-joints and replaced both of them. I put the driveline back
> in and now I have the same vibration. What now? I suspect the bearing
> on the outputshaft of the trasfer case. What do you guys think? Are
> these hard to replace?
>
#12
Guest
Posts: n/a
Re: Vibration??
Ya coulda thrown a balance weight. Have your DS rebalanced.
Scott
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1143040752.668275.6890@t31g2000cwb.googlegrou ps.com...
>I have a '88 YJ with the Dana 30 front end with a locker. I have been
> noticing a vibration lately when I get up to freeway speeds. So, I
> checked my front U-joints the other day and felt quite a bit of slop.
> So, I pulled the front driveline. I went for a drive without the front
> driveline and noticed the vibration was gone. Wahoo! So, I figured it
> was the u-joints and replaced both of them. I put the driveline back
> in and now I have the same vibration. What now? I suspect the bearing
> on the outputshaft of the trasfer case. What do you guys think? Are
> these hard to replace?
>
Scott
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1143040752.668275.6890@t31g2000cwb.googlegrou ps.com...
>I have a '88 YJ with the Dana 30 front end with a locker. I have been
> noticing a vibration lately when I get up to freeway speeds. So, I
> checked my front U-joints the other day and felt quite a bit of slop.
> So, I pulled the front driveline. I went for a drive without the front
> driveline and noticed the vibration was gone. Wahoo! So, I figured it
> was the u-joints and replaced both of them. I put the driveline back
> in and now I have the same vibration. What now? I suspect the bearing
> on the outputshaft of the trasfer case. What do you guys think? Are
> these hard to replace?
>
#13
Guest
Posts: n/a
Re: Vibration??
Ya coulda thrown a balance weight. Have your DS rebalanced.
Scott
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1143040752.668275.6890@t31g2000cwb.googlegrou ps.com...
>I have a '88 YJ with the Dana 30 front end with a locker. I have been
> noticing a vibration lately when I get up to freeway speeds. So, I
> checked my front U-joints the other day and felt quite a bit of slop.
> So, I pulled the front driveline. I went for a drive without the front
> driveline and noticed the vibration was gone. Wahoo! So, I figured it
> was the u-joints and replaced both of them. I put the driveline back
> in and now I have the same vibration. What now? I suspect the bearing
> on the outputshaft of the trasfer case. What do you guys think? Are
> these hard to replace?
>
Scott
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1143040752.668275.6890@t31g2000cwb.googlegrou ps.com...
>I have a '88 YJ with the Dana 30 front end with a locker. I have been
> noticing a vibration lately when I get up to freeway speeds. So, I
> checked my front U-joints the other day and felt quite a bit of slop.
> So, I pulled the front driveline. I went for a drive without the front
> driveline and noticed the vibration was gone. Wahoo! So, I figured it
> was the u-joints and replaced both of them. I put the driveline back
> in and now I have the same vibration. What now? I suspect the bearing
> on the outputshaft of the trasfer case. What do you guys think? Are
> these hard to replace?
>
Thread
Thread Starter
Forum
Replies
Last Post
William Oliveri
Jeep Mailing List
60
02-12-2004 10:47 PM
brad smith
Jeep Mailing List
27
02-05-2004 03:53 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)