Vacuum leak
#1
Guest
Posts: n/a
Vacuum leak
My Jeep just developed a vacuum leak... a high pitched squeal only at idle
after it heats up. I have look and checked hoses but have not found it. I
saw a friend (on another vehicle) use ether, and look for increased idle to
find a leak (but never found it). Is there another method?
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
after it heats up. I have look and checked hoses but have not found it. I
saw a friend (on another vehicle) use ether, and look for increased idle to
find a leak (but never found it). Is there another method?
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
#2
Guest
Posts: n/a
Re: Vacuum leak
Try spraying carb cleaner, fuel injector cleaner, or WD-40 at the vacuum
hoses and their connections. Either will cause the engine rpm to change
when it gets sucked into the engine through the leak you just sprayed.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:Op2Ib.36736$s03.20779@news02.roc.ny...
> My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> after it heats up. I have look and checked hoses but have not found it.
I
> saw a friend (on another vehicle) use ether, and look for increased idle
to
> find a leak (but never found it). Is there another method?
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
>
hoses and their connections. Either will cause the engine rpm to change
when it gets sucked into the engine through the leak you just sprayed.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:Op2Ib.36736$s03.20779@news02.roc.ny...
> My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> after it heats up. I have look and checked hoses but have not found it.
I
> saw a friend (on another vehicle) use ether, and look for increased idle
to
> find a leak (but never found it). Is there another method?
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
>
#3
Guest
Posts: n/a
Re: Vacuum leak
Try spraying carb cleaner, fuel injector cleaner, or WD-40 at the vacuum
hoses and their connections. Either will cause the engine rpm to change
when it gets sucked into the engine through the leak you just sprayed.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:Op2Ib.36736$s03.20779@news02.roc.ny...
> My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> after it heats up. I have look and checked hoses but have not found it.
I
> saw a friend (on another vehicle) use ether, and look for increased idle
to
> find a leak (but never found it). Is there another method?
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
>
hoses and their connections. Either will cause the engine rpm to change
when it gets sucked into the engine through the leak you just sprayed.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:Op2Ib.36736$s03.20779@news02.roc.ny...
> My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> after it heats up. I have look and checked hoses but have not found it.
I
> saw a friend (on another vehicle) use ether, and look for increased idle
to
> find a leak (but never found it). Is there another method?
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
>
#4
Guest
Posts: n/a
Re: Vacuum leak
Try spraying carb cleaner, fuel injector cleaner, or WD-40 at the vacuum
hoses and their connections. Either will cause the engine rpm to change
when it gets sucked into the engine through the leak you just sprayed.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:Op2Ib.36736$s03.20779@news02.roc.ny...
> My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> after it heats up. I have look and checked hoses but have not found it.
I
> saw a friend (on another vehicle) use ether, and look for increased idle
to
> find a leak (but never found it). Is there another method?
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
>
hoses and their connections. Either will cause the engine rpm to change
when it gets sucked into the engine through the leak you just sprayed.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:Op2Ib.36736$s03.20779@news02.roc.ny...
> My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> after it heats up. I have look and checked hoses but have not found it.
I
> saw a friend (on another vehicle) use ether, and look for increased idle
to
> find a leak (but never found it). Is there another method?
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
>
#5
Guest
Posts: n/a
Re: Vacuum leak
Retorque the manifold bolts.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JimG wrote:
>
> My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> after it heats up. I have look and checked hoses but have not found it. I
> saw a friend (on another vehicle) use ether, and look for increased idle to
> find a leak (but never found it). Is there another method?
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JimG wrote:
>
> My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> after it heats up. I have look and checked hoses but have not found it. I
> saw a friend (on another vehicle) use ether, and look for increased idle to
> find a leak (but never found it). Is there another method?
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
#6
Guest
Posts: n/a
Re: Vacuum leak
Retorque the manifold bolts.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JimG wrote:
>
> My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> after it heats up. I have look and checked hoses but have not found it. I
> saw a friend (on another vehicle) use ether, and look for increased idle to
> find a leak (but never found it). Is there another method?
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JimG wrote:
>
> My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> after it heats up. I have look and checked hoses but have not found it. I
> saw a friend (on another vehicle) use ether, and look for increased idle to
> find a leak (but never found it). Is there another method?
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
#7
Guest
Posts: n/a
Re: Vacuum leak
Retorque the manifold bolts.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JimG wrote:
>
> My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> after it heats up. I have look and checked hoses but have not found it. I
> saw a friend (on another vehicle) use ether, and look for increased idle to
> find a leak (but never found it). Is there another method?
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JimG wrote:
>
> My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> after it heats up. I have look and checked hoses but have not found it. I
> saw a friend (on another vehicle) use ether, and look for increased idle to
> find a leak (but never found it). Is there another method?
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
#8
Guest
Posts: n/a
Re: Vacuum leak
And the carb base bolts while there...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> Retorque the manifold bolts.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> JimG wrote:
> >
> > My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> > after it heats up. I have look and checked hoses but have not found it. I
> > saw a friend (on another vehicle) use ether, and look for increased idle to
> > find a leak (but never found it). Is there another method?
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> Retorque the manifold bolts.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> JimG wrote:
> >
> > My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> > after it heats up. I have look and checked hoses but have not found it. I
> > saw a friend (on another vehicle) use ether, and look for increased idle to
> > find a leak (but never found it). Is there another method?
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
#9
Guest
Posts: n/a
Re: Vacuum leak
And the carb base bolts while there...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> Retorque the manifold bolts.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> JimG wrote:
> >
> > My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> > after it heats up. I have look and checked hoses but have not found it. I
> > saw a friend (on another vehicle) use ether, and look for increased idle to
> > find a leak (but never found it). Is there another method?
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> Retorque the manifold bolts.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> JimG wrote:
> >
> > My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> > after it heats up. I have look and checked hoses but have not found it. I
> > saw a friend (on another vehicle) use ether, and look for increased idle to
> > find a leak (but never found it). Is there another method?
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
#10
Guest
Posts: n/a
Re: Vacuum leak
And the carb base bolts while there...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> Retorque the manifold bolts.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> JimG wrote:
> >
> > My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> > after it heats up. I have look and checked hoses but have not found it. I
> > saw a friend (on another vehicle) use ether, and look for increased idle to
> > find a leak (but never found it). Is there another method?
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> Retorque the manifold bolts.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> JimG wrote:
> >
> > My Jeep just developed a vacuum leak... a high pitched squeal only at idle
> > after it heats up. I have look and checked hoses but have not found it. I
> > saw a friend (on another vehicle) use ether, and look for increased idle to
> > find a leak (but never found it). Is there another method?
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries