undocumented oil temp sender in 88 YJ
06-12-2006, 08:49 AM
#1
Guest
Posts: n/a
undocumented oil temp sender in 88 YJ
replacing the Oil pressure sender the other day, I noticed what appears
to be a oil temp sensor just below it, on the same plumbing. Is this
some undocumented (it's not in either Haynes or Chiltons that I can
find) computer sensor or a non-working low oil level sensor I didn't
know YJ's had? Unplugging it does nothing, and My Jeeps been low enough
on Oil to have made itself known to me by now.
--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
to be a oil temp sensor just below it, on the same plumbing. Is this
some undocumented (it's not in either Haynes or Chiltons that I can
find) computer sensor or a non-working low oil level sensor I didn't
know YJ's had? Unplugging it does nothing, and My Jeeps been low enough
on Oil to have made itself known to me by now.
--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
06-12-2006, 10:00 AM
#2
Guest
Posts: n/a
Re: undocumented oil temp sender in 88 YJ
That is the oil pressure safety switch used on the choke and manifold
heating element. It makes sure you can't burn out either one by leaving
the key in run with the engine not started. No oil pressure, no choke.
The engine should run like a pig and totally choke out with that
disconnected. The choke needs power to open.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Simon Juncal wrote:
>
> replacing the Oil pressure sender the other day, I noticed what appears
> to be a oil temp sensor just below it, on the same plumbing. Is this
> some undocumented (it's not in either Haynes or Chiltons that I can
> find) computer sensor or a non-working low oil level sensor I didn't
> know YJ's had? Unplugging it does nothing, and My Jeeps been low enough
> on Oil to have made itself known to me by now.
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
heating element. It makes sure you can't burn out either one by leaving
the key in run with the engine not started. No oil pressure, no choke.
The engine should run like a pig and totally choke out with that
disconnected. The choke needs power to open.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Simon Juncal wrote:
>
> replacing the Oil pressure sender the other day, I noticed what appears
> to be a oil temp sensor just below it, on the same plumbing. Is this
> some undocumented (it's not in either Haynes or Chiltons that I can
> find) computer sensor or a non-working low oil level sensor I didn't
> know YJ's had? Unplugging it does nothing, and My Jeeps been low enough
> on Oil to have made itself known to me by now.
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
06-12-2006, 10:00 AM
#3
Guest
Posts: n/a
Re: undocumented oil temp sender in 88 YJ
That is the oil pressure safety switch used on the choke and manifold
heating element. It makes sure you can't burn out either one by leaving
the key in run with the engine not started. No oil pressure, no choke.
The engine should run like a pig and totally choke out with that
disconnected. The choke needs power to open.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Simon Juncal wrote:
>
> replacing the Oil pressure sender the other day, I noticed what appears
> to be a oil temp sensor just below it, on the same plumbing. Is this
> some undocumented (it's not in either Haynes or Chiltons that I can
> find) computer sensor or a non-working low oil level sensor I didn't
> know YJ's had? Unplugging it does nothing, and My Jeeps been low enough
> on Oil to have made itself known to me by now.
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
heating element. It makes sure you can't burn out either one by leaving
the key in run with the engine not started. No oil pressure, no choke.
The engine should run like a pig and totally choke out with that
disconnected. The choke needs power to open.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Simon Juncal wrote:
>
> replacing the Oil pressure sender the other day, I noticed what appears
> to be a oil temp sensor just below it, on the same plumbing. Is this
> some undocumented (it's not in either Haynes or Chiltons that I can
> find) computer sensor or a non-working low oil level sensor I didn't
> know YJ's had? Unplugging it does nothing, and My Jeeps been low enough
> on Oil to have made itself known to me by now.
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
06-12-2006, 10:00 AM
#4
Guest
Posts: n/a
Re: undocumented oil temp sender in 88 YJ
That is the oil pressure safety switch used on the choke and manifold
heating element. It makes sure you can't burn out either one by leaving
the key in run with the engine not started. No oil pressure, no choke.
The engine should run like a pig and totally choke out with that
disconnected. The choke needs power to open.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Simon Juncal wrote:
>
> replacing the Oil pressure sender the other day, I noticed what appears
> to be a oil temp sensor just below it, on the same plumbing. Is this
> some undocumented (it's not in either Haynes or Chiltons that I can
> find) computer sensor or a non-working low oil level sensor I didn't
> know YJ's had? Unplugging it does nothing, and My Jeeps been low enough
> on Oil to have made itself known to me by now.
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
heating element. It makes sure you can't burn out either one by leaving
the key in run with the engine not started. No oil pressure, no choke.
The engine should run like a pig and totally choke out with that
disconnected. The choke needs power to open.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Simon Juncal wrote:
>
> replacing the Oil pressure sender the other day, I noticed what appears
> to be a oil temp sensor just below it, on the same plumbing. Is this
> some undocumented (it's not in either Haynes or Chiltons that I can
> find) computer sensor or a non-working low oil level sensor I didn't
> know YJ's had? Unplugging it does nothing, and My Jeeps been low enough
> on Oil to have made itself known to me by now.
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
06-12-2006, 04:39 PM
#5
Guest
Posts: n/a
Re: undocumented oil temp sender in 88 YJ
Mike Romain wrote:
> That is the oil pressure safety switch used on the choke and manifold
> heating element. It makes sure you can't burn out either one by leaving
> the key in run with the engine not started. No oil pressure, no choke.
> The engine should run like a pig and totally choke out with that
> disconnected. The choke needs power to open.
Interesting, thanks Mike. BTW it wont run like a pig without it because
that computer and Carter BBD are no longer part of my YJ's engine.
--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
> That is the oil pressure safety switch used on the choke and manifold
> heating element. It makes sure you can't burn out either one by leaving
> the key in run with the engine not started. No oil pressure, no choke.
> The engine should run like a pig and totally choke out with that
> disconnected. The choke needs power to open.
Interesting, thanks Mike. BTW it wont run like a pig without it because
that computer and Carter BBD are no longer part of my YJ's engine.
--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
06-12-2006, 04:39 PM
#6
Guest
Posts: n/a
Re: undocumented oil temp sender in 88 YJ
Mike Romain wrote:
> That is the oil pressure safety switch used on the choke and manifold
> heating element. It makes sure you can't burn out either one by leaving
> the key in run with the engine not started. No oil pressure, no choke.
> The engine should run like a pig and totally choke out with that
> disconnected. The choke needs power to open.
Interesting, thanks Mike. BTW it wont run like a pig without it because
that computer and Carter BBD are no longer part of my YJ's engine.
--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
> That is the oil pressure safety switch used on the choke and manifold
> heating element. It makes sure you can't burn out either one by leaving
> the key in run with the engine not started. No oil pressure, no choke.
> The engine should run like a pig and totally choke out with that
> disconnected. The choke needs power to open.
Interesting, thanks Mike. BTW it wont run like a pig without it because
that computer and Carter BBD are no longer part of my YJ's engine.
--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
06-12-2006, 04:39 PM
#7
Guest
Posts: n/a
Re: undocumented oil temp sender in 88 YJ
Mike Romain wrote:
> That is the oil pressure safety switch used on the choke and manifold
> heating element. It makes sure you can't burn out either one by leaving
> the key in run with the engine not started. No oil pressure, no choke.
> The engine should run like a pig and totally choke out with that
> disconnected. The choke needs power to open.
Interesting, thanks Mike. BTW it wont run like a pig without it because
that computer and Carter BBD are no longer part of my YJ's engine.
--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
> That is the oil pressure safety switch used on the choke and manifold
> heating element. It makes sure you can't burn out either one by leaving
> the key in run with the engine not started. No oil pressure, no choke.
> The engine should run like a pig and totally choke out with that
> disconnected. The choke needs power to open.
Interesting, thanks Mike. BTW it wont run like a pig without it because
that computer and Carter BBD are no longer part of my YJ's engine.
--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
06-12-2006, 09:20 PM
#8
Guest
Posts: n/a
Re: undocumented oil temp sender in 88 YJ
It's undocumented but D-C is advocating amnesty.
"Simon Juncal" <SPAMERSSUCK@usefirstinitialandlastnameATerols.com > wrote in
message news:Ytmdnb91AYRG_xDZnZ2dnUVZ_vydnZ2d@rcn.net...
> replacing the Oil pressure sender the other day, I noticed what appears to
> be a oil temp sensor just below it, on the same plumbing. Is this some
> undocumented (it's not in either Haynes or Chiltons that I can find)
> computer sensor or a non-working low oil level sensor I didn't know YJ's
> had? Unplugging it does nothing, and My Jeeps been low enough on Oil to
> have made itself known to me by now.
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
"Simon Juncal" <SPAMERSSUCK@usefirstinitialandlastnameATerols.com > wrote in
message news:Ytmdnb91AYRG_xDZnZ2dnUVZ_vydnZ2d@rcn.net...
> replacing the Oil pressure sender the other day, I noticed what appears to
> be a oil temp sensor just below it, on the same plumbing. Is this some
> undocumented (it's not in either Haynes or Chiltons that I can find)
> computer sensor or a non-working low oil level sensor I didn't know YJ's
> had? Unplugging it does nothing, and My Jeeps been low enough on Oil to
> have made itself known to me by now.
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
06-12-2006, 09:20 PM
#9
Guest
Posts: n/a
Re: undocumented oil temp sender in 88 YJ
It's undocumented but D-C is advocating amnesty.
"Simon Juncal" <SPAMERSSUCK@usefirstinitialandlastnameATerols.com > wrote in
message news:Ytmdnb91AYRG_xDZnZ2dnUVZ_vydnZ2d@rcn.net...
> replacing the Oil pressure sender the other day, I noticed what appears to
> be a oil temp sensor just below it, on the same plumbing. Is this some
> undocumented (it's not in either Haynes or Chiltons that I can find)
> computer sensor or a non-working low oil level sensor I didn't know YJ's
> had? Unplugging it does nothing, and My Jeeps been low enough on Oil to
> have made itself known to me by now.
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
"Simon Juncal" <SPAMERSSUCK@usefirstinitialandlastnameATerols.com > wrote in
message news:Ytmdnb91AYRG_xDZnZ2dnUVZ_vydnZ2d@rcn.net...
> replacing the Oil pressure sender the other day, I noticed what appears to
> be a oil temp sensor just below it, on the same plumbing. Is this some
> undocumented (it's not in either Haynes or Chiltons that I can find)
> computer sensor or a non-working low oil level sensor I didn't know YJ's
> had? Unplugging it does nothing, and My Jeeps been low enough on Oil to
> have made itself known to me by now.
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
06-12-2006, 09:20 PM
#10
Guest
Posts: n/a
Re: undocumented oil temp sender in 88 YJ
It's undocumented but D-C is advocating amnesty.
"Simon Juncal" <SPAMERSSUCK@usefirstinitialandlastnameATerols.com > wrote in
message news:Ytmdnb91AYRG_xDZnZ2dnUVZ_vydnZ2d@rcn.net...
> replacing the Oil pressure sender the other day, I noticed what appears to
> be a oil temp sensor just below it, on the same plumbing. Is this some
> undocumented (it's not in either Haynes or Chiltons that I can find)
> computer sensor or a non-working low oil level sensor I didn't know YJ's
> had? Unplugging it does nothing, and My Jeeps been low enough on Oil to
> have made itself known to me by now.
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
"Simon Juncal" <SPAMERSSUCK@usefirstinitialandlastnameATerols.com > wrote in
message news:Ytmdnb91AYRG_xDZnZ2dnUVZ_vydnZ2d@rcn.net...
> replacing the Oil pressure sender the other day, I noticed what appears to
> be a oil temp sensor just below it, on the same plumbing. Is this some
> undocumented (it's not in either Haynes or Chiltons that I can find)
> computer sensor or a non-working low oil level sensor I didn't know YJ's
> had? Unplugging it does nothing, and My Jeeps been low enough on Oil to
> have made itself known to me by now.
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
