U Joint question.
02-04-2007, 11:34 PM
#21
Guest
Posts: n/a
Re: U Joint question.
On Feb 4, 10:00 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> Jeep stands for Just Empty Every Pocket. The nickel and dime stuff can be
> very discouraging, but don't let it get to you.
>
> Carl
>
> "jerryg" <Greggi...@msn.com> wrote in message
>
> news:1170646506.411268.43500@k78g2000cwa.googlegro ups.com...
>
>
>
> > On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> You can try loosening the straps a little bit and filling it with greast
> >> but
> >> it sounds like your yoke is warped. Try the grease first.
>
> >> Carl
>
> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >>news:1170645705.693917.314700@v45g2000cwv.google groups.com...
>
> >> > Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
> >> > right part but it is not a tight fit into the yoke as I've been told
> >> > it should be. The joint has a grease fitting. Should I loosen the
> >> > straps and grease it up until the bearing caps contact the tabs, or
> >> > leave it alone? The new joint seemed to quiet down my vibration
> >> > problem. Thanks as always.
>
> >> > Greg- Hide quoted text -
>
> >> - Show quoted text -
>
> > Thats what I figured. I am really getting discouraged. It seems like
> > one thing after another. AARRGGHH!!- Hide quoted text -
>
> - Show quoted text -
I had a nice boat for about 6 years. I spent ALOT of money on it. I
was told, and I know from first hand experience, that boat stands for
Break Out Another Thousand!! How true. The boat was a lot of fun, but
not half as fun as driving a Jeep!!
Greg
> Jeep stands for Just Empty Every Pocket. The nickel and dime stuff can be
> very discouraging, but don't let it get to you.
>
> Carl
>
> "jerryg" <Greggi...@msn.com> wrote in message
>
> news:1170646506.411268.43500@k78g2000cwa.googlegro ups.com...
>
>
>
> > On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> You can try loosening the straps a little bit and filling it with greast
> >> but
> >> it sounds like your yoke is warped. Try the grease first.
>
> >> Carl
>
> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >>news:1170645705.693917.314700@v45g2000cwv.google groups.com...
>
> >> > Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
> >> > right part but it is not a tight fit into the yoke as I've been told
> >> > it should be. The joint has a grease fitting. Should I loosen the
> >> > straps and grease it up until the bearing caps contact the tabs, or
> >> > leave it alone? The new joint seemed to quiet down my vibration
> >> > problem. Thanks as always.
>
> >> > Greg- Hide quoted text -
>
> >> - Show quoted text -
>
> > Thats what I figured. I am really getting discouraged. It seems like
> > one thing after another. AARRGGHH!!- Hide quoted text -
>
> - Show quoted text -
I had a nice boat for about 6 years. I spent ALOT of money on it. I
was told, and I know from first hand experience, that boat stands for
Break Out Another Thousand!! How true. The boat was a lot of fun, but
not half as fun as driving a Jeep!!
Greg
02-05-2007, 01:07 AM
#22
Guest
Posts: n/a
Re: U Joint question.
If it helps any, I went through the EXACT same problem when I first got
my '87 Wrangler. Just bite the bullet and get it fixed right so it
doesn't come back to haunt you.
jerryg wrote:
> On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>You can try loosening the straps a little bit and filling it with greast but
>>it sounds like your yoke is warped. Try the grease first.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170645705.693917.314700@v45g2000cwv.google groups.com...
>>
>>
>>
>>
>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>right part but it is not a tight fit into the yoke as I've been told
>>>it should be. The joint has a grease fitting. Should I loosen the
>>>straps and grease it up until the bearing caps contact the tabs, or
>>>leave it alone? The new joint seemed to quiet down my vibration
>>>problem. Thanks as always.
>>
>>>Greg- Hide quoted text -
>>
>>- Show quoted text -
>
>
> Thats what I figured. I am really getting discouraged. It seems like
> one thing after another. AARRGGHH!!
>
my '87 Wrangler. Just bite the bullet and get it fixed right so it
doesn't come back to haunt you.
jerryg wrote:
> On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>You can try loosening the straps a little bit and filling it with greast but
>>it sounds like your yoke is warped. Try the grease first.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170645705.693917.314700@v45g2000cwv.google groups.com...
>>
>>
>>
>>
>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>right part but it is not a tight fit into the yoke as I've been told
>>>it should be. The joint has a grease fitting. Should I loosen the
>>>straps and grease it up until the bearing caps contact the tabs, or
>>>leave it alone? The new joint seemed to quiet down my vibration
>>>problem. Thanks as always.
>>
>>>Greg- Hide quoted text -
>>
>>- Show quoted text -
>
>
> Thats what I figured. I am really getting discouraged. It seems like
> one thing after another. AARRGGHH!!
>
02-05-2007, 01:07 AM
#23
Guest
Posts: n/a
Re: U Joint question.
If it helps any, I went through the EXACT same problem when I first got
my '87 Wrangler. Just bite the bullet and get it fixed right so it
doesn't come back to haunt you.
jerryg wrote:
> On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>You can try loosening the straps a little bit and filling it with greast but
>>it sounds like your yoke is warped. Try the grease first.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170645705.693917.314700@v45g2000cwv.google groups.com...
>>
>>
>>
>>
>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>right part but it is not a tight fit into the yoke as I've been told
>>>it should be. The joint has a grease fitting. Should I loosen the
>>>straps and grease it up until the bearing caps contact the tabs, or
>>>leave it alone? The new joint seemed to quiet down my vibration
>>>problem. Thanks as always.
>>
>>>Greg- Hide quoted text -
>>
>>- Show quoted text -
>
>
> Thats what I figured. I am really getting discouraged. It seems like
> one thing after another. AARRGGHH!!
>
my '87 Wrangler. Just bite the bullet and get it fixed right so it
doesn't come back to haunt you.
jerryg wrote:
> On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>You can try loosening the straps a little bit and filling it with greast but
>>it sounds like your yoke is warped. Try the grease first.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170645705.693917.314700@v45g2000cwv.google groups.com...
>>
>>
>>
>>
>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>right part but it is not a tight fit into the yoke as I've been told
>>>it should be. The joint has a grease fitting. Should I loosen the
>>>straps and grease it up until the bearing caps contact the tabs, or
>>>leave it alone? The new joint seemed to quiet down my vibration
>>>problem. Thanks as always.
>>
>>>Greg- Hide quoted text -
>>
>>- Show quoted text -
>
>
> Thats what I figured. I am really getting discouraged. It seems like
> one thing after another. AARRGGHH!!
>
02-05-2007, 01:07 AM
#24
Guest
Posts: n/a
Re: U Joint question.
If it helps any, I went through the EXACT same problem when I first got
my '87 Wrangler. Just bite the bullet and get it fixed right so it
doesn't come back to haunt you.
jerryg wrote:
> On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>You can try loosening the straps a little bit and filling it with greast but
>>it sounds like your yoke is warped. Try the grease first.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170645705.693917.314700@v45g2000cwv.google groups.com...
>>
>>
>>
>>
>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>right part but it is not a tight fit into the yoke as I've been told
>>>it should be. The joint has a grease fitting. Should I loosen the
>>>straps and grease it up until the bearing caps contact the tabs, or
>>>leave it alone? The new joint seemed to quiet down my vibration
>>>problem. Thanks as always.
>>
>>>Greg- Hide quoted text -
>>
>>- Show quoted text -
>
>
> Thats what I figured. I am really getting discouraged. It seems like
> one thing after another. AARRGGHH!!
>
my '87 Wrangler. Just bite the bullet and get it fixed right so it
doesn't come back to haunt you.
jerryg wrote:
> On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>You can try loosening the straps a little bit and filling it with greast but
>>it sounds like your yoke is warped. Try the grease first.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170645705.693917.314700@v45g2000cwv.google groups.com...
>>
>>
>>
>>
>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>right part but it is not a tight fit into the yoke as I've been told
>>>it should be. The joint has a grease fitting. Should I loosen the
>>>straps and grease it up until the bearing caps contact the tabs, or
>>>leave it alone? The new joint seemed to quiet down my vibration
>>>problem. Thanks as always.
>>
>>>Greg- Hide quoted text -
>>
>>- Show quoted text -
>
>
> Thats what I figured. I am really getting discouraged. It seems like
> one thing after another. AARRGGHH!!
>
02-05-2007, 01:07 AM
#25
Guest
Posts: n/a
Re: U Joint question.
If it helps any, I went through the EXACT same problem when I first got
my '87 Wrangler. Just bite the bullet and get it fixed right so it
doesn't come back to haunt you.
jerryg wrote:
> On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>You can try loosening the straps a little bit and filling it with greast but
>>it sounds like your yoke is warped. Try the grease first.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170645705.693917.314700@v45g2000cwv.google groups.com...
>>
>>
>>
>>
>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>right part but it is not a tight fit into the yoke as I've been told
>>>it should be. The joint has a grease fitting. Should I loosen the
>>>straps and grease it up until the bearing caps contact the tabs, or
>>>leave it alone? The new joint seemed to quiet down my vibration
>>>problem. Thanks as always.
>>
>>>Greg- Hide quoted text -
>>
>>- Show quoted text -
>
>
> Thats what I figured. I am really getting discouraged. It seems like
> one thing after another. AARRGGHH!!
>
my '87 Wrangler. Just bite the bullet and get it fixed right so it
doesn't come back to haunt you.
jerryg wrote:
> On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>You can try loosening the straps a little bit and filling it with greast but
>>it sounds like your yoke is warped. Try the grease first.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170645705.693917.314700@v45g2000cwv.google groups.com...
>>
>>
>>
>>
>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>right part but it is not a tight fit into the yoke as I've been told
>>>it should be. The joint has a grease fitting. Should I loosen the
>>>straps and grease it up until the bearing caps contact the tabs, or
>>>leave it alone? The new joint seemed to quiet down my vibration
>>>problem. Thanks as always.
>>
>>>Greg- Hide quoted text -
>>
>>- Show quoted text -
>
>
> Thats what I figured. I am really getting discouraged. It seems like
> one thing after another. AARRGGHH!!
>
02-05-2007, 01:09 AM
#26
Guest
Posts: n/a
Re: U Joint question.
Heh, I should have read all the way through the thread before I
commented. Not only did I have the same problem with the yoke and the
poorly fitting U joint, I got rid of the boat so I could fit the jeep in
the garage when I bought it. :)
jerryg wrote:
> On Feb 4, 10:00 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>Jeep stands for Just Empty Every Pocket. The nickel and dime stuff can be
>>very discouraging, but don't let it get to you.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170646506.411268.43500@k78g2000cwa.googleg roups.com...
>>
>>
>>
>>
>>>On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>
>>>>You can try loosening the straps a little bit and filling it with greast
>>>>but
>>>>it sounds like your yoke is warped. Try the grease first.
>>
>>>>Carl
>>
>>>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>>>news:1170645705.693917.314700@v45g2000cwv.goog legroups.com...
>>
>>>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>>>right part but it is not a tight fit into the yoke as I've been told
>>>>>it should be. The joint has a grease fitting. Should I loosen the
>>>>>straps and grease it up until the bearing caps contact the tabs, or
>>>>>leave it alone? The new joint seemed to quiet down my vibration
>>>>>problem. Thanks as always.
>>
>>>>>Greg- Hide quoted text -
>>
>>>>- Show quoted text -
>>
>>>Thats what I figured. I am really getting discouraged. It seems like
>>>one thing after another. AARRGGHH!!- Hide quoted text -
>>
>>- Show quoted text -
>
>
> I had a nice boat for about 6 years. I spent ALOT of money on it. I
> was told, and I know from first hand experience, that boat stands for
> Break Out Another Thousand!! How true. The boat was a lot of fun, but
> not half as fun as driving a Jeep!!
>
> Greg
>
commented. Not only did I have the same problem with the yoke and the
poorly fitting U joint, I got rid of the boat so I could fit the jeep in
the garage when I bought it. :)
jerryg wrote:
> On Feb 4, 10:00 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>Jeep stands for Just Empty Every Pocket. The nickel and dime stuff can be
>>very discouraging, but don't let it get to you.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170646506.411268.43500@k78g2000cwa.googleg roups.com...
>>
>>
>>
>>
>>>On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>
>>>>You can try loosening the straps a little bit and filling it with greast
>>>>but
>>>>it sounds like your yoke is warped. Try the grease first.
>>
>>>>Carl
>>
>>>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>>>news:1170645705.693917.314700@v45g2000cwv.goog legroups.com...
>>
>>>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>>>right part but it is not a tight fit into the yoke as I've been told
>>>>>it should be. The joint has a grease fitting. Should I loosen the
>>>>>straps and grease it up until the bearing caps contact the tabs, or
>>>>>leave it alone? The new joint seemed to quiet down my vibration
>>>>>problem. Thanks as always.
>>
>>>>>Greg- Hide quoted text -
>>
>>>>- Show quoted text -
>>
>>>Thats what I figured. I am really getting discouraged. It seems like
>>>one thing after another. AARRGGHH!!- Hide quoted text -
>>
>>- Show quoted text -
>
>
> I had a nice boat for about 6 years. I spent ALOT of money on it. I
> was told, and I know from first hand experience, that boat stands for
> Break Out Another Thousand!! How true. The boat was a lot of fun, but
> not half as fun as driving a Jeep!!
>
> Greg
>
02-05-2007, 01:09 AM
#27
Guest
Posts: n/a
Re: U Joint question.
Heh, I should have read all the way through the thread before I
commented. Not only did I have the same problem with the yoke and the
poorly fitting U joint, I got rid of the boat so I could fit the jeep in
the garage when I bought it. :)
jerryg wrote:
> On Feb 4, 10:00 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>Jeep stands for Just Empty Every Pocket. The nickel and dime stuff can be
>>very discouraging, but don't let it get to you.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170646506.411268.43500@k78g2000cwa.googleg roups.com...
>>
>>
>>
>>
>>>On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>
>>>>You can try loosening the straps a little bit and filling it with greast
>>>>but
>>>>it sounds like your yoke is warped. Try the grease first.
>>
>>>>Carl
>>
>>>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>>>news:1170645705.693917.314700@v45g2000cwv.goog legroups.com...
>>
>>>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>>>right part but it is not a tight fit into the yoke as I've been told
>>>>>it should be. The joint has a grease fitting. Should I loosen the
>>>>>straps and grease it up until the bearing caps contact the tabs, or
>>>>>leave it alone? The new joint seemed to quiet down my vibration
>>>>>problem. Thanks as always.
>>
>>>>>Greg- Hide quoted text -
>>
>>>>- Show quoted text -
>>
>>>Thats what I figured. I am really getting discouraged. It seems like
>>>one thing after another. AARRGGHH!!- Hide quoted text -
>>
>>- Show quoted text -
>
>
> I had a nice boat for about 6 years. I spent ALOT of money on it. I
> was told, and I know from first hand experience, that boat stands for
> Break Out Another Thousand!! How true. The boat was a lot of fun, but
> not half as fun as driving a Jeep!!
>
> Greg
>
commented. Not only did I have the same problem with the yoke and the
poorly fitting U joint, I got rid of the boat so I could fit the jeep in
the garage when I bought it. :)
jerryg wrote:
> On Feb 4, 10:00 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>Jeep stands for Just Empty Every Pocket. The nickel and dime stuff can be
>>very discouraging, but don't let it get to you.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170646506.411268.43500@k78g2000cwa.googleg roups.com...
>>
>>
>>
>>
>>>On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>
>>>>You can try loosening the straps a little bit and filling it with greast
>>>>but
>>>>it sounds like your yoke is warped. Try the grease first.
>>
>>>>Carl
>>
>>>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>>>news:1170645705.693917.314700@v45g2000cwv.goog legroups.com...
>>
>>>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>>>right part but it is not a tight fit into the yoke as I've been told
>>>>>it should be. The joint has a grease fitting. Should I loosen the
>>>>>straps and grease it up until the bearing caps contact the tabs, or
>>>>>leave it alone? The new joint seemed to quiet down my vibration
>>>>>problem. Thanks as always.
>>
>>>>>Greg- Hide quoted text -
>>
>>>>- Show quoted text -
>>
>>>Thats what I figured. I am really getting discouraged. It seems like
>>>one thing after another. AARRGGHH!!- Hide quoted text -
>>
>>- Show quoted text -
>
>
> I had a nice boat for about 6 years. I spent ALOT of money on it. I
> was told, and I know from first hand experience, that boat stands for
> Break Out Another Thousand!! How true. The boat was a lot of fun, but
> not half as fun as driving a Jeep!!
>
> Greg
>
02-05-2007, 01:09 AM
#28
Guest
Posts: n/a
Re: U Joint question.
Heh, I should have read all the way through the thread before I
commented. Not only did I have the same problem with the yoke and the
poorly fitting U joint, I got rid of the boat so I could fit the jeep in
the garage when I bought it. :)
jerryg wrote:
> On Feb 4, 10:00 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>Jeep stands for Just Empty Every Pocket. The nickel and dime stuff can be
>>very discouraging, but don't let it get to you.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170646506.411268.43500@k78g2000cwa.googleg roups.com...
>>
>>
>>
>>
>>>On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>
>>>>You can try loosening the straps a little bit and filling it with greast
>>>>but
>>>>it sounds like your yoke is warped. Try the grease first.
>>
>>>>Carl
>>
>>>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>>>news:1170645705.693917.314700@v45g2000cwv.goog legroups.com...
>>
>>>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>>>right part but it is not a tight fit into the yoke as I've been told
>>>>>it should be. The joint has a grease fitting. Should I loosen the
>>>>>straps and grease it up until the bearing caps contact the tabs, or
>>>>>leave it alone? The new joint seemed to quiet down my vibration
>>>>>problem. Thanks as always.
>>
>>>>>Greg- Hide quoted text -
>>
>>>>- Show quoted text -
>>
>>>Thats what I figured. I am really getting discouraged. It seems like
>>>one thing after another. AARRGGHH!!- Hide quoted text -
>>
>>- Show quoted text -
>
>
> I had a nice boat for about 6 years. I spent ALOT of money on it. I
> was told, and I know from first hand experience, that boat stands for
> Break Out Another Thousand!! How true. The boat was a lot of fun, but
> not half as fun as driving a Jeep!!
>
> Greg
>
commented. Not only did I have the same problem with the yoke and the
poorly fitting U joint, I got rid of the boat so I could fit the jeep in
the garage when I bought it. :)
jerryg wrote:
> On Feb 4, 10:00 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>Jeep stands for Just Empty Every Pocket. The nickel and dime stuff can be
>>very discouraging, but don't let it get to you.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170646506.411268.43500@k78g2000cwa.googleg roups.com...
>>
>>
>>
>>
>>>On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>
>>>>You can try loosening the straps a little bit and filling it with greast
>>>>but
>>>>it sounds like your yoke is warped. Try the grease first.
>>
>>>>Carl
>>
>>>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>>>news:1170645705.693917.314700@v45g2000cwv.goog legroups.com...
>>
>>>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>>>right part but it is not a tight fit into the yoke as I've been told
>>>>>it should be. The joint has a grease fitting. Should I loosen the
>>>>>straps and grease it up until the bearing caps contact the tabs, or
>>>>>leave it alone? The new joint seemed to quiet down my vibration
>>>>>problem. Thanks as always.
>>
>>>>>Greg- Hide quoted text -
>>
>>>>- Show quoted text -
>>
>>>Thats what I figured. I am really getting discouraged. It seems like
>>>one thing after another. AARRGGHH!!- Hide quoted text -
>>
>>- Show quoted text -
>
>
> I had a nice boat for about 6 years. I spent ALOT of money on it. I
> was told, and I know from first hand experience, that boat stands for
> Break Out Another Thousand!! How true. The boat was a lot of fun, but
> not half as fun as driving a Jeep!!
>
> Greg
>
02-05-2007, 01:09 AM
#29
Guest
Posts: n/a
Re: U Joint question.
Heh, I should have read all the way through the thread before I
commented. Not only did I have the same problem with the yoke and the
poorly fitting U joint, I got rid of the boat so I could fit the jeep in
the garage when I bought it. :)
jerryg wrote:
> On Feb 4, 10:00 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>Jeep stands for Just Empty Every Pocket. The nickel and dime stuff can be
>>very discouraging, but don't let it get to you.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170646506.411268.43500@k78g2000cwa.googleg roups.com...
>>
>>
>>
>>
>>>On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>
>>>>You can try loosening the straps a little bit and filling it with greast
>>>>but
>>>>it sounds like your yoke is warped. Try the grease first.
>>
>>>>Carl
>>
>>>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>>>news:1170645705.693917.314700@v45g2000cwv.goog legroups.com...
>>
>>>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>>>right part but it is not a tight fit into the yoke as I've been told
>>>>>it should be. The joint has a grease fitting. Should I loosen the
>>>>>straps and grease it up until the bearing caps contact the tabs, or
>>>>>leave it alone? The new joint seemed to quiet down my vibration
>>>>>problem. Thanks as always.
>>
>>>>>Greg- Hide quoted text -
>>
>>>>- Show quoted text -
>>
>>>Thats what I figured. I am really getting discouraged. It seems like
>>>one thing after another. AARRGGHH!!- Hide quoted text -
>>
>>- Show quoted text -
>
>
> I had a nice boat for about 6 years. I spent ALOT of money on it. I
> was told, and I know from first hand experience, that boat stands for
> Break Out Another Thousand!! How true. The boat was a lot of fun, but
> not half as fun as driving a Jeep!!
>
> Greg
>
commented. Not only did I have the same problem with the yoke and the
poorly fitting U joint, I got rid of the boat so I could fit the jeep in
the garage when I bought it. :)
jerryg wrote:
> On Feb 4, 10:00 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>
>>Jeep stands for Just Empty Every Pocket. The nickel and dime stuff can be
>>very discouraging, but don't let it get to you.
>>
>>Carl
>>
>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>news:1170646506.411268.43500@k78g2000cwa.googleg roups.com...
>>
>>
>>
>>
>>>On Feb 4, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>
>>>>You can try loosening the straps a little bit and filling it with greast
>>>>but
>>>>it sounds like your yoke is warped. Try the grease first.
>>
>>>>Carl
>>
>>>>"jerryg" <Greggi...@msn.com> wrote in message
>>
>>>>news:1170645705.693917.314700@v45g2000cwv.goog legroups.com...
>>
>>>>>Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
>>>>>right part but it is not a tight fit into the yoke as I've been told
>>>>>it should be. The joint has a grease fitting. Should I loosen the
>>>>>straps and grease it up until the bearing caps contact the tabs, or
>>>>>leave it alone? The new joint seemed to quiet down my vibration
>>>>>problem. Thanks as always.
>>
>>>>>Greg- Hide quoted text -
>>
>>>>- Show quoted text -
>>
>>>Thats what I figured. I am really getting discouraged. It seems like
>>>one thing after another. AARRGGHH!!- Hide quoted text -
>>
>>- Show quoted text -
>
>
> I had a nice boat for about 6 years. I spent ALOT of money on it. I
> was told, and I know from first hand experience, that boat stands for
> Break Out Another Thousand!! How true. The boat was a lot of fun, but
> not half as fun as driving a Jeep!!
>
> Greg
>
02-05-2007, 10:06 AM
#30
Guest
Posts: n/a
Re: U Joint question.
Your yoke is now damaged from the last loose one.
I have 'never' seen a successful fix, the yoke needs replacing.
I had the exact thing happen to my CJ7 and tried to keep using it
'loose' like you have hoping the new straps would hold it. I got away
with it for quite a while too, but...
When it let got again, it grenaded the yoke so the driveshaft turned
into a propeller taking out my exhaust, my gas line and my brake line
while punching holes in the floor of the Jeep.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
jerryg wrote:
> Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
> right part but it is not a tight fit into the yoke as I've been told
> it should be. The joint has a grease fitting. Should I loosen the
> straps and grease it up until the bearing caps contact the tabs, or
> leave it alone? The new joint seemed to quiet down my vibration
> problem. Thanks as always.
>
> Greg
>
I have 'never' seen a successful fix, the yoke needs replacing.
I had the exact thing happen to my CJ7 and tried to keep using it
'loose' like you have hoping the new straps would hold it. I got away
with it for quite a while too, but...
When it let got again, it grenaded the yoke so the driveshaft turned
into a propeller taking out my exhaust, my gas line and my brake line
while punching holes in the floor of the Jeep.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
jerryg wrote:
> Installed new U Joint on my 95 YJ. Rear axle. Lower joint. Got the
> right part but it is not a tight fit into the yoke as I've been told
> it should be. The joint has a grease fitting. Should I loosen the
> straps and grease it up until the bearing caps contact the tabs, or
> leave it alone? The new joint seemed to quiet down my vibration
> problem. Thanks as always.
>
> Greg
>