u-joint problems
#21
Guest
Posts: n/a
Re: Replacing the Yoke
You already have a Real yoke on your Dana 300 or 20.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke for
> the CV shaft)? Any special tools/torque that would not allow DIY?
>
> Thanks,
>
> Bill
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke for
> the CV shaft)? Any special tools/torque that would not allow DIY?
>
> Thanks,
>
> Bill
#22
Guest
Posts: n/a
Re: Replacing the Yoke
You can still use the D300 yoke with a CV Shaft? I thought it needed to be
changed.
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:411D3D40.CE2FB659@***.net...
> You already have a Real yoke on your Dana 300 or 20.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > I'm planning for a CV Shaft upgrade in the near future. Is there
anything
> > unusual about changing the Yoke (dispite that I'll need a different yoke
for
> > the CV shaft)? Any special tools/torque that would not allow DIY?
> >
> > Thanks,
> >
> > Bill
changed.
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:411D3D40.CE2FB659@***.net...
> You already have a Real yoke on your Dana 300 or 20.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > I'm planning for a CV Shaft upgrade in the near future. Is there
anything
> > unusual about changing the Yoke (dispite that I'll need a different yoke
for
> > the CV shaft)? Any special tools/torque that would not allow DIY?
> >
> > Thanks,
> >
> > Bill
#23
Guest
Posts: n/a
Re: Replacing the Yoke
You can still use the D300 yoke with a CV Shaft? I thought it needed to be
changed.
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:411D3D40.CE2FB659@***.net...
> You already have a Real yoke on your Dana 300 or 20.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > I'm planning for a CV Shaft upgrade in the near future. Is there
anything
> > unusual about changing the Yoke (dispite that I'll need a different yoke
for
> > the CV shaft)? Any special tools/torque that would not allow DIY?
> >
> > Thanks,
> >
> > Bill
changed.
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:411D3D40.CE2FB659@***.net...
> You already have a Real yoke on your Dana 300 or 20.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > I'm planning for a CV Shaft upgrade in the near future. Is there
anything
> > unusual about changing the Yoke (dispite that I'll need a different yoke
for
> > the CV shaft)? Any special tools/torque that would not allow DIY?
> >
> > Thanks,
> >
> > Bill
#24
Guest
Posts: n/a
Re: Replacing the Yoke
You can still use the D300 yoke with a CV Shaft? I thought it needed to be
changed.
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:411D3D40.CE2FB659@***.net...
> You already have a Real yoke on your Dana 300 or 20.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > I'm planning for a CV Shaft upgrade in the near future. Is there
anything
> > unusual about changing the Yoke (dispite that I'll need a different yoke
for
> > the CV shaft)? Any special tools/torque that would not allow DIY?
> >
> > Thanks,
> >
> > Bill
changed.
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:411D3D40.CE2FB659@***.net...
> You already have a Real yoke on your Dana 300 or 20.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > I'm planning for a CV Shaft upgrade in the near future. Is there
anything
> > unusual about changing the Yoke (dispite that I'll need a different yoke
for
> > the CV shaft)? Any special tools/torque that would not allow DIY?
> >
> > Thanks,
> >
> > Bill
#25
Guest
Posts: n/a
Re: Replacing the Yoke
You can still use the D300 yoke with a CV Shaft? I thought it needed to be
changed.
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:411D3D40.CE2FB659@***.net...
> You already have a Real yoke on your Dana 300 or 20.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > I'm planning for a CV Shaft upgrade in the near future. Is there
anything
> > unusual about changing the Yoke (dispite that I'll need a different yoke
for
> > the CV shaft)? Any special tools/torque that would not allow DIY?
> >
> > Thanks,
> >
> > Bill
changed.
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:411D3D40.CE2FB659@***.net...
> You already have a Real yoke on your Dana 300 or 20.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > I'm planning for a CV Shaft upgrade in the near future. Is there
anything
> > unusual about changing the Yoke (dispite that I'll need a different yoke
for
> > the CV shaft)? Any special tools/torque that would not allow DIY?
> >
> > Thanks,
> >
> > Bill
#26
Guest
Posts: n/a
Re: Replacing the Yoke
Hi Bill,
Not if you use the stronger Ford type constant velocity joint:
http://www.off-road.com/jeep/tech/axle/yoke05.jpg
http://www.rockcrawler.com/techrepor...e300/page2.asp
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> You can still use the D300 yoke with a CV Shaft? I thought it needed to be
> changed.
>
> Bill
Not if you use the stronger Ford type constant velocity joint:
http://www.off-road.com/jeep/tech/axle/yoke05.jpg
http://www.rockcrawler.com/techrepor...e300/page2.asp
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> You can still use the D300 yoke with a CV Shaft? I thought it needed to be
> changed.
>
> Bill
#27
Guest
Posts: n/a
Re: Replacing the Yoke
Hi Bill,
Not if you use the stronger Ford type constant velocity joint:
http://www.off-road.com/jeep/tech/axle/yoke05.jpg
http://www.rockcrawler.com/techrepor...e300/page2.asp
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> You can still use the D300 yoke with a CV Shaft? I thought it needed to be
> changed.
>
> Bill
Not if you use the stronger Ford type constant velocity joint:
http://www.off-road.com/jeep/tech/axle/yoke05.jpg
http://www.rockcrawler.com/techrepor...e300/page2.asp
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> You can still use the D300 yoke with a CV Shaft? I thought it needed to be
> changed.
>
> Bill
#28
Guest
Posts: n/a
Re: Replacing the Yoke
Hi Bill,
Not if you use the stronger Ford type constant velocity joint:
http://www.off-road.com/jeep/tech/axle/yoke05.jpg
http://www.rockcrawler.com/techrepor...e300/page2.asp
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> You can still use the D300 yoke with a CV Shaft? I thought it needed to be
> changed.
>
> Bill
Not if you use the stronger Ford type constant velocity joint:
http://www.off-road.com/jeep/tech/axle/yoke05.jpg
http://www.rockcrawler.com/techrepor...e300/page2.asp
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> You can still use the D300 yoke with a CV Shaft? I thought it needed to be
> changed.
>
> Bill
#29
Guest
Posts: n/a
Re: Replacing the Yoke
Hi Bill,
Not if you use the stronger Ford type constant velocity joint:
http://www.off-road.com/jeep/tech/axle/yoke05.jpg
http://www.rockcrawler.com/techrepor...e300/page2.asp
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> You can still use the D300 yoke with a CV Shaft? I thought it needed to be
> changed.
>
> Bill
Not if you use the stronger Ford type constant velocity joint:
http://www.off-road.com/jeep/tech/axle/yoke05.jpg
http://www.rockcrawler.com/techrepor...e300/page2.asp
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> You can still use the D300 yoke with a CV Shaft? I thought it needed to be
> changed.
>
> Bill
#30
Guest
Posts: n/a
Re: Replacing the Yoke
William Oliveri wrote:
> You can still use the D300 yoke with a CV Shaft? I thought it needed to
> be changed.
I had to change mine when I put on my Tom Woods driveshaft. Just pull the
nut off that holds the yoke, and pull the yoke. Also, you probably want to
get a puller to get the yoke off. The torque for the nut is about 125 ft
pounds. The new yoke was $60.00 from Tom Woods.
--
Say NO! To TCPA! http://www.againsttcpa.com
What's Microsoft up to: http://www.euronet.nl/users/frankvw/IhateMS.html
> You can still use the D300 yoke with a CV Shaft? I thought it needed to
> be changed.
I had to change mine when I put on my Tom Woods driveshaft. Just pull the
nut off that holds the yoke, and pull the yoke. Also, you probably want to
get a puller to get the yoke off. The torque for the nut is about 125 ft
pounds. The new yoke was $60.00 from Tom Woods.
--
Say NO! To TCPA! http://www.againsttcpa.com
What's Microsoft up to: http://www.euronet.nl/users/frankvw/IhateMS.html