u-joint problems
08-13-2004, 10:27 AM
#14
Guest
Posts: n/a
Re: Replacing the Yoke
Just did this on my TJ, I used Tom Woods http://www.4xshaft.com/ and a write
up my Matt Macchiarolo http://7slotgrille.com/tech/sye2/index.html .
--
benito -
01 TJ
76 CJ7
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2o381qF69ir0U1@uni-berlin.de...
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke
for
> the CV shaft)? Any special tools/torque that would not allow DIY?
up my Matt Macchiarolo http://7slotgrille.com/tech/sye2/index.html .
--
benito -
01 TJ
76 CJ7
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2o381qF69ir0U1@uni-berlin.de...
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke
for
> the CV shaft)? Any special tools/torque that would not allow DIY?
08-13-2004, 10:27 AM
#15
Guest
Posts: n/a
Re: Replacing the Yoke
Just did this on my TJ, I used Tom Woods http://www.4xshaft.com/ and a write
up my Matt Macchiarolo http://7slotgrille.com/tech/sye2/index.html .
--
benito -
01 TJ
76 CJ7
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2o381qF69ir0U1@uni-berlin.de...
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke
for
> the CV shaft)? Any special tools/torque that would not allow DIY?
up my Matt Macchiarolo http://7slotgrille.com/tech/sye2/index.html .
--
benito -
01 TJ
76 CJ7
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2o381qF69ir0U1@uni-berlin.de...
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke
for
> the CV shaft)? Any special tools/torque that would not allow DIY?
08-13-2004, 10:27 AM
#16
Guest
Posts: n/a
Re: Replacing the Yoke
Just did this on my TJ, I used Tom Woods http://www.4xshaft.com/ and a write
up my Matt Macchiarolo http://7slotgrille.com/tech/sye2/index.html .
--
benito -
01 TJ
76 CJ7
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2o381qF69ir0U1@uni-berlin.de...
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke
for
> the CV shaft)? Any special tools/torque that would not allow DIY?
up my Matt Macchiarolo http://7slotgrille.com/tech/sye2/index.html .
--
benito -
01 TJ
76 CJ7
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2o381qF69ir0U1@uni-berlin.de...
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke
for
> the CV shaft)? Any special tools/torque that would not allow DIY?
08-13-2004, 10:27 AM
#17
Guest
Posts: n/a
Re: Replacing the Yoke
Just did this on my TJ, I used Tom Woods http://www.4xshaft.com/ and a write
up my Matt Macchiarolo http://7slotgrille.com/tech/sye2/index.html .
--
benito -
01 TJ
76 CJ7
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2o381qF69ir0U1@uni-berlin.de...
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke
for
> the CV shaft)? Any special tools/torque that would not allow DIY?
up my Matt Macchiarolo http://7slotgrille.com/tech/sye2/index.html .
--
benito -
01 TJ
76 CJ7
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2o381qF69ir0U1@uni-berlin.de...
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke
for
> the CV shaft)? Any special tools/torque that would not allow DIY?
08-13-2004, 06:14 PM
#18
Guest
Posts: n/a
Re: Replacing the Yoke
You already have a Real yoke on your Dana 300 or 20.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke for
> the CV shaft)? Any special tools/torque that would not allow DIY?
>
> Thanks,
>
> Bill
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke for
> the CV shaft)? Any special tools/torque that would not allow DIY?
>
> Thanks,
>
> Bill
08-13-2004, 06:14 PM
#19
Guest
Posts: n/a
Re: Replacing the Yoke
You already have a Real yoke on your Dana 300 or 20.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke for
> the CV shaft)? Any special tools/torque that would not allow DIY?
>
> Thanks,
>
> Bill
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke for
> the CV shaft)? Any special tools/torque that would not allow DIY?
>
> Thanks,
>
> Bill
08-13-2004, 06:14 PM
#20
Guest
Posts: n/a
Re: Replacing the Yoke
You already have a Real yoke on your Dana 300 or 20.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke for
> the CV shaft)? Any special tools/torque that would not allow DIY?
>
> Thanks,
>
> Bill
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I'm planning for a CV Shaft upgrade in the near future. Is there anything
> unusual about changing the Yoke (dispite that I'll need a different yoke for
> the CV shaft)? Any special tools/torque that would not allow DIY?
>
> Thanks,
>
> Bill