Turn signal switch question-Cherokee
09-10-2005, 01:00 PM
#1
Guest
Posts: n/a
Turn signal switch question-Cherokee
I have a dumb question.
My 1988 Cherokee turn signal lever won't stay in position when turning
right. It stays ok when turning left (yeah , I know, just make left hand
turns).
Other than that everything works fine.
Anyway, do I need the plastic "cam" in the column under the steering wheel
or do I need the combination wiper/dimmer/turn signal switch that the lever
shoves into?
I hope that I just need the cam because it's $10.00 as opposed to $100.00
for the combination switch. The parts places won't let you return electrical
parts, so I can't buy both and return the one that I don't need.
Thanks in advance for any help!
Keith
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
My 1988 Cherokee turn signal lever won't stay in position when turning
right. It stays ok when turning left (yeah , I know, just make left hand
turns).
Other than that everything works fine.
Anyway, do I need the plastic "cam" in the column under the steering wheel
or do I need the combination wiper/dimmer/turn signal switch that the lever
shoves into?
I hope that I just need the cam because it's $10.00 as opposed to $100.00
for the combination switch. The parts places won't let you return electrical
parts, so I can't buy both and return the one that I don't need.
Thanks in advance for any help!
Keith
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
09-10-2005, 02:52 PM
#2
Guest
Posts: n/a
Re: Turn signal switch question-Cherokee
i dont know about the cherokee but I have had to replace the multi function
switch on wranglers often they cost me 38 bucks and about 20 minute
install!
"Keith Stelter" <stelter@qtm.net> wrote in message
news:1126371789_6597@spool6-east.superfeed.net...
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the
lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return
electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption
=----
switch on wranglers often they cost me 38 bucks and about 20 minute
install!
"Keith Stelter" <stelter@qtm.net> wrote in message
news:1126371789_6597@spool6-east.superfeed.net...
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the
lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return
electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption
=----
09-10-2005, 02:52 PM
#3
Guest
Posts: n/a
Re: Turn signal switch question-Cherokee
i dont know about the cherokee but I have had to replace the multi function
switch on wranglers often they cost me 38 bucks and about 20 minute
install!
"Keith Stelter" <stelter@qtm.net> wrote in message
news:1126371789_6597@spool6-east.superfeed.net...
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the
lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return
electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption
=----
switch on wranglers often they cost me 38 bucks and about 20 minute
install!
"Keith Stelter" <stelter@qtm.net> wrote in message
news:1126371789_6597@spool6-east.superfeed.net...
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the
lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return
electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption
=----
09-10-2005, 02:52 PM
#4
Guest
Posts: n/a
Re: Turn signal switch question-Cherokee
i dont know about the cherokee but I have had to replace the multi function
switch on wranglers often they cost me 38 bucks and about 20 minute
install!
"Keith Stelter" <stelter@qtm.net> wrote in message
news:1126371789_6597@spool6-east.superfeed.net...
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the
lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return
electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption
=----
switch on wranglers often they cost me 38 bucks and about 20 minute
install!
"Keith Stelter" <stelter@qtm.net> wrote in message
news:1126371789_6597@spool6-east.superfeed.net...
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the
lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return
electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption
=----
09-10-2005, 02:52 PM
#5
Guest
Posts: n/a
Re: Turn signal switch question-Cherokee
i dont know about the cherokee but I have had to replace the multi function
switch on wranglers often they cost me 38 bucks and about 20 minute
install!
"Keith Stelter" <stelter@qtm.net> wrote in message
news:1126371789_6597@spool6-east.superfeed.net...
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the
lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return
electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption
=----
switch on wranglers often they cost me 38 bucks and about 20 minute
install!
"Keith Stelter" <stelter@qtm.net> wrote in message
news:1126371789_6597@spool6-east.superfeed.net...
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the
lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return
electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption
=----
09-10-2005, 03:01 PM
#6
Guest
Posts: n/a
Re: Turn signal switch question-Cherokee
Is your steering wheel slightly crooked by any chance?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Keith Stelter wrote:
>
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Keith Stelter wrote:
>
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption =----
09-10-2005, 03:01 PM
#7
Guest
Posts: n/a
Re: Turn signal switch question-Cherokee
Is your steering wheel slightly crooked by any chance?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Keith Stelter wrote:
>
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Keith Stelter wrote:
>
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption =----
09-10-2005, 03:01 PM
#8
Guest
Posts: n/a
Re: Turn signal switch question-Cherokee
Is your steering wheel slightly crooked by any chance?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Keith Stelter wrote:
>
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Keith Stelter wrote:
>
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption =----
09-10-2005, 03:01 PM
#9
Guest
Posts: n/a
Re: Turn signal switch question-Cherokee
Is your steering wheel slightly crooked by any chance?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Keith Stelter wrote:
>
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Keith Stelter wrote:
>
> I have a dumb question.
> My 1988 Cherokee turn signal lever won't stay in position when turning
> right. It stays ok when turning left (yeah , I know, just make left hand
> turns).
> Other than that everything works fine.
> Anyway, do I need the plastic "cam" in the column under the steering wheel
> or do I need the combination wiper/dimmer/turn signal switch that the lever
> shoves into?
> I hope that I just need the cam because it's $10.00 as opposed to $100.00
> for the combination switch. The parts places won't let you return electrical
> parts, so I can't buy both and return the one that I don't need.
> Thanks in advance for any help!
> Keith
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption =----
09-10-2005, 03:19 PM
#10
Guest
Posts: n/a
Re: Turn signal switch question-Cherokee
Nope.
It's perfectly straight. The car had this problem when I bought it a few
months ago, and I'm just now getting around to fixing it. I had to take care
of other more important things first, like changing over the cooling system,
etc.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43232D95.CD1D4D8F@sympatico.ca...
> Is your steering wheel slightly crooked by any chance?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Keith Stelter wrote:
>>
>> I have a dumb question.
>> My 1988 Cherokee turn signal lever won't stay in position when turning
>> right. It stays ok when turning left (yeah , I know, just make left hand
>> turns).
>> Other than that everything works fine.
>> Anyway, do I need the plastic "cam" in the column under the steering
>> wheel
>> or do I need the combination wiper/dimmer/turn signal switch that the
>> lever
>> shoves into?
>> I hope that I just need the cam because it's $10.00 as opposed to $100.00
>> for the combination switch. The parts places won't let you return
>> electrical
>> parts, so I can't buy both and return the one that I don't need.
>> Thanks in advance for any help!
>> Keith
>>
>>
>> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
>> News==----
>> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
>> Newsgroups
>> ----= East and West-Coast Server Farms - Total Privacy via Encryption
>> =----
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
It's perfectly straight. The car had this problem when I bought it a few
months ago, and I'm just now getting around to fixing it. I had to take care
of other more important things first, like changing over the cooling system,
etc.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43232D95.CD1D4D8F@sympatico.ca...
> Is your steering wheel slightly crooked by any chance?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Keith Stelter wrote:
>>
>> I have a dumb question.
>> My 1988 Cherokee turn signal lever won't stay in position when turning
>> right. It stays ok when turning left (yeah , I know, just make left hand
>> turns).
>> Other than that everything works fine.
>> Anyway, do I need the plastic "cam" in the column under the steering
>> wheel
>> or do I need the combination wiper/dimmer/turn signal switch that the
>> lever
>> shoves into?
>> I hope that I just need the cam because it's $10.00 as opposed to $100.00
>> for the combination switch. The parts places won't let you return
>> electrical
>> parts, so I can't buy both and return the one that I don't need.
>> Thanks in advance for any help!
>> Keith
>>
>>
>> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
>> News==----
>> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
>> Newsgroups
>> ----= East and West-Coast Server Farms - Total Privacy via Encryption
>> =----
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----