Re: Transmission problems...new torque converter?
On Jun 5, 5:11 pm, XS11E <x...@mailinator.com> wrote:
> 97tjMike <MichaelJun...@gmail.com> wrote: > > On Jun 5, 1:14 pm, XS11E <x...@mailinator.com> wrote: > >> How many miles were on the vehicle? > > 68,000 miles > > A transmission can go bad in that time, but not usually. > > -- > XS11E, Killing all posts from Google Groups > The Usenet Improvement Project:http://blinkynet.net/comp/uip5.html Just to probe for data -- I'm assuming you adjusted the front band after the problem surfaced? Please post the spec to which you adjusted the band. Jon |
Re: Transmission problems...new torque converter?
On Jun 5, 5:11 pm, XS11E <x...@mailinator.com> wrote:
> 97tjMike <MichaelJun...@gmail.com> wrote: > > On Jun 5, 1:14 pm, XS11E <x...@mailinator.com> wrote: > >> How many miles were on the vehicle? > > 68,000 miles > > A transmission can go bad in that time, but not usually. > > -- > XS11E, Killing all posts from Google Groups > The Usenet Improvement Project:http://blinkynet.net/comp/uip5.html Just to probe for data -- I'm assuming you adjusted the front band after the problem surfaced? Please post the spec to which you adjusted the band. Jon |
Re: Transmission problems...new torque converter?
On Jun 5, 5:11 pm, XS11E <x...@mailinator.com> wrote:
> 97tjMike <MichaelJun...@gmail.com> wrote: > > On Jun 5, 1:14 pm, XS11E <x...@mailinator.com> wrote: > >> How many miles were on the vehicle? > > 68,000 miles > > A transmission can go bad in that time, but not usually. > > -- > XS11E, Killing all posts from Google Groups > The Usenet Improvement Project:http://blinkynet.net/comp/uip5.html Just to probe for data -- I'm assuming you adjusted the front band after the problem surfaced? Please post the spec to which you adjusted the band. Jon |
Re: Re: Transmission problems...new torque converter?
On Tue, 05 Jun 2007 17:11:52 -0700, XS11E <xs11e@mailinator.com>
wrote: >A transmission can go bad in that time, but not usually. I have seen them fail sooner. It all depends on how they are treated. Big lifts and/or over sized tires with stock gears are very hard on some trannies and can shorten their life a lot.. ----------------- TheSnoMan.com |
Re: Re: Transmission problems...new torque converter?
On Tue, 05 Jun 2007 17:11:52 -0700, XS11E <xs11e@mailinator.com>
wrote: >A transmission can go bad in that time, but not usually. I have seen them fail sooner. It all depends on how they are treated. Big lifts and/or over sized tires with stock gears are very hard on some trannies and can shorten their life a lot.. ----------------- TheSnoMan.com |
Re: Re: Transmission problems...new torque converter?
On Tue, 05 Jun 2007 17:11:52 -0700, XS11E <xs11e@mailinator.com>
wrote: >A transmission can go bad in that time, but not usually. I have seen them fail sooner. It all depends on how they are treated. Big lifts and/or over sized tires with stock gears are very hard on some trannies and can shorten their life a lot.. ----------------- TheSnoMan.com |
Re: Re: Transmission problems...new torque converter?
On Tue, 05 Jun 2007 17:11:52 -0700, XS11E <xs11e@mailinator.com>
wrote: >A transmission can go bad in that time, but not usually. I have seen them fail sooner. It all depends on how they are treated. Big lifts and/or over sized tires with stock gears are very hard on some trannies and can shorten their life a lot.. ----------------- TheSnoMan.com |
Re: Transmission problems...new torque converter?
On Jun 6, 10:08 am, SnoMan <a...@snoman.com> wrote:
> On Tue, 05 Jun 2007 17:11:52 -0700, XS11E <x...@mailinator.com> > wrote: > > >A transmission can go bad in that time, but not usually. > > I have seen them fail sooner. It all depends on how they are treated. > Big lifts and/or over sized tires with stock gears are very hard on > some trannies and can shorten their life a lot.. > ----------------- > TheSnoMan.com Well that doesn't apply to me for sure. I have 30" tires and a 2 inch lift. Plus the tranny has spent 90% of its life with 205s and no lift. But anyways an update: I had a guy clean it out initially and he changed my shift points so that it shifted at higher RPMs. He said to keep it this way for a week or so to build up pressure to flush out any dirt that's still in there. He adjusted something under the hood right by the TV cable so thats what I assumed he changed. I currently cant get into contact with him which is why I was the one that adjusted it back. I adjusted the TV cable according to the Hanes manual, and the nature of the shuttering seemed to change. Originally, it only shuttered when you drove it hard, now it shutters when you drive it lightly. Now it *hardly* shutters on take-off (big improvement), but it still shutters in 1-2, and never in 3-4. If I floor it it drives perfectly. Someone suggested that I re-adjust the bands because I just adjusted the TV cable and they go hand in hand. The fact that adjusting the TV cable changed the properties of the shutter makes me think that this is something simple, but maybe I'm just being hopeful. Suggestions? (Also as far as new transmissions go, *if* I do need a transmission (I say if on a conditional basis based on your comments and the comments of the shop(s) I take it to), is it ok to buy a rebuilt?) Mike |
Re: Transmission problems...new torque converter?
On Jun 6, 10:08 am, SnoMan <a...@snoman.com> wrote:
> On Tue, 05 Jun 2007 17:11:52 -0700, XS11E <x...@mailinator.com> > wrote: > > >A transmission can go bad in that time, but not usually. > > I have seen them fail sooner. It all depends on how they are treated. > Big lifts and/or over sized tires with stock gears are very hard on > some trannies and can shorten their life a lot.. > ----------------- > TheSnoMan.com Well that doesn't apply to me for sure. I have 30" tires and a 2 inch lift. Plus the tranny has spent 90% of its life with 205s and no lift. But anyways an update: I had a guy clean it out initially and he changed my shift points so that it shifted at higher RPMs. He said to keep it this way for a week or so to build up pressure to flush out any dirt that's still in there. He adjusted something under the hood right by the TV cable so thats what I assumed he changed. I currently cant get into contact with him which is why I was the one that adjusted it back. I adjusted the TV cable according to the Hanes manual, and the nature of the shuttering seemed to change. Originally, it only shuttered when you drove it hard, now it shutters when you drive it lightly. Now it *hardly* shutters on take-off (big improvement), but it still shutters in 1-2, and never in 3-4. If I floor it it drives perfectly. Someone suggested that I re-adjust the bands because I just adjusted the TV cable and they go hand in hand. The fact that adjusting the TV cable changed the properties of the shutter makes me think that this is something simple, but maybe I'm just being hopeful. Suggestions? (Also as far as new transmissions go, *if* I do need a transmission (I say if on a conditional basis based on your comments and the comments of the shop(s) I take it to), is it ok to buy a rebuilt?) Mike |
Re: Transmission problems...new torque converter?
On Jun 6, 10:08 am, SnoMan <a...@snoman.com> wrote:
> On Tue, 05 Jun 2007 17:11:52 -0700, XS11E <x...@mailinator.com> > wrote: > > >A transmission can go bad in that time, but not usually. > > I have seen them fail sooner. It all depends on how they are treated. > Big lifts and/or over sized tires with stock gears are very hard on > some trannies and can shorten their life a lot.. > ----------------- > TheSnoMan.com Well that doesn't apply to me for sure. I have 30" tires and a 2 inch lift. Plus the tranny has spent 90% of its life with 205s and no lift. But anyways an update: I had a guy clean it out initially and he changed my shift points so that it shifted at higher RPMs. He said to keep it this way for a week or so to build up pressure to flush out any dirt that's still in there. He adjusted something under the hood right by the TV cable so thats what I assumed he changed. I currently cant get into contact with him which is why I was the one that adjusted it back. I adjusted the TV cable according to the Hanes manual, and the nature of the shuttering seemed to change. Originally, it only shuttered when you drove it hard, now it shutters when you drive it lightly. Now it *hardly* shutters on take-off (big improvement), but it still shutters in 1-2, and never in 3-4. If I floor it it drives perfectly. Someone suggested that I re-adjust the bands because I just adjusted the TV cable and they go hand in hand. The fact that adjusting the TV cable changed the properties of the shutter makes me think that this is something simple, but maybe I'm just being hopeful. Suggestions? (Also as far as new transmissions go, *if* I do need a transmission (I say if on a conditional basis based on your comments and the comments of the shop(s) I take it to), is it ok to buy a rebuilt?) Mike |
All times are GMT -4. The time now is 12:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands