Transfer case wobble

Reply Subscribe

Thread Tools

Search this Thread

09-26-2003, 08:44 PM

#11

TJim

Guest

Posts: n/a

Re: Transfer case wobble

You can, but I believe it requires a 1" body lift.

--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98

"Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
news:7oRcb.20455$gv5.7412@fed1read05...
> Sounds like he needs a tcase drop or an sye. Can you do motor mounts that
> are taller on a tj?
> KH
>
> "Jerry Bransford" <jerrypb@mecox.net> wrote in message
> news:LKLcb.18240$gv5.5656@fed1read05...
> > Did you by any chance correct the now too-steep angles that your rear
> > driveshaft is suffering from? Did whoever sold you or installed the
lift
> > tell you anything about that? Because it sure sounds like the rear
> > driveshaft angle is excessive, causing u-joint vibrations.
> >
> > Jerry
> > --
> > Jerry Bransford
> > To email, remove 'me' from my email address
> > KC6TAY, PP-ASEL
> > See the Geezer Jeep at
> > http://members.***.net/jerrypb/
> >
> > "Aaron Prater" <alprater@***.net> wrote in message
> > news:8DKcb.5287$Rd4.292@fed1read07...
> > > Just installed a 4" Procomp lift on my 98 TJ. Since the install Ive
> > noticed
> > > a pretty significant wobble of the t-case when taking off in 1st gear.
> > > Transmission mounts and crossmember are all tight. Nothing seems to
be
> > > loose. I can only duplicate it by hand from the t-case itself...no
> > movement
> > > when pushing on the transmission. Anybody have any thoughts?
> > >
> > >
> >
> >
>
>