On my Mustang, the slip-yoke output seal went because the tail shaft bushing
went out. Check the bushings/bearings when you do the deal. Also, before you
replace the seal, try to move the driveshaft from left to right, up and down
to check for play.
Excessive play indicates wear.

Carl


"DanFXR" <DanFxr@optonline.net> wrote in message
news:mNdUf.20$163.15@fe08.lga...
> 2000 Jeep Cherokee Sport,4L 4WD.
> Need to replace the transfer case rear output seal.
> Before I get under there can somone tell me what they used to seat the
> seal? Will a deep socket work or a cut section of PVC pipe?
> Thanks
>

 

On my Mustang, the slip-yoke output seal went because the tail shaft bushing
went out. Check the bushings/bearings when you do the deal. Also, before you
replace the seal, try to move the driveshaft from left to right, up and down
to check for play.
Excessive play indicates wear.

Carl


"DanFXR" <DanFxr@optonline.net> wrote in message
news:mNdUf.20$163.15@fe08.lga...
> 2000 Jeep Cherokee Sport,4L 4WD.
> Need to replace the transfer case rear output seal.
> Before I get under there can somone tell me what they used to seat the
> seal? Will a deep socket work or a cut section of PVC pipe?
> Thanks
>