Trailer wiring question
#41
Guest
Posts: n/a
Re: Trailer wiring question
Garth Almgren wrote:
> On Jul 17, 7:10 am, Mike Romain <roma...@sympatico.ca> wrote:
>
>> You can't do what you want with diodes. Someone designed that unit and
>> some silly 3rd brake light units for trailers without knowing how the
>> power actually works. These units are useless because there is no way
>> to distinguish power from the brake pedal switch or from the signal
>> switch. Power is power.
>
> Very good point, and as someone else pointed out, my method would
> still have it blinking when I'm signalling but not on the brakes.
>
> On the upside, there seem to be a couple 3rd brake logic circuits
> that'll work much better than my diode idea for sale at JC Whitney.
> Example:
> http://www.jcwhitney.com/autoparts/I...D:100000213268
>
> --
> ~Garth (via Google)
>
That is an interesting unit and would do the trick.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> On Jul 17, 7:10 am, Mike Romain <roma...@sympatico.ca> wrote:
>
>> You can't do what you want with diodes. Someone designed that unit and
>> some silly 3rd brake light units for trailers without knowing how the
>> power actually works. These units are useless because there is no way
>> to distinguish power from the brake pedal switch or from the signal
>> switch. Power is power.
>
> Very good point, and as someone else pointed out, my method would
> still have it blinking when I'm signalling but not on the brakes.
>
> On the upside, there seem to be a couple 3rd brake logic circuits
> that'll work much better than my diode idea for sale at JC Whitney.
> Example:
> http://www.jcwhitney.com/autoparts/I...D:100000213268
>
> --
> ~Garth (via Google)
>
That is an interesting unit and would do the trick.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
#46
Guest
Posts: n/a
Re: Trailer wiring question
On Wed, 18 Jul 2007 09:14:14 -0700, "L.W. \(Bill\) ------ III"
<LWBill------@------.net> wrote:
> Sounds like you've never been to Tijuana.
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Well, yes I have. It's been a few years, though.
I just want the third brake light back on my Jeep.
Then again, I'm looking for a cheap Hypercharger for my Harley and
can't find one of them, either(which surprises me as much as people
bash*them* too).
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
<LWBill------@------.net> wrote:
> Sounds like you've never been to Tijuana.
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Well, yes I have. It's been a few years, though.
I just want the third brake light back on my Jeep.
Then again, I'm looking for a cheap Hypercharger for my Harley and
can't find one of them, either(which surprises me as much as people
bash*them* too).
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
#47
Guest
Posts: n/a
Re: Trailer wiring question
On Wed, 18 Jul 2007 09:14:14 -0700, "L.W. \(Bill\) ------ III"
<LWBill------@------.net> wrote:
> Sounds like you've never been to Tijuana.
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Well, yes I have. It's been a few years, though.
I just want the third brake light back on my Jeep.
Then again, I'm looking for a cheap Hypercharger for my Harley and
can't find one of them, either(which surprises me as much as people
bash*them* too).
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
<LWBill------@------.net> wrote:
> Sounds like you've never been to Tijuana.
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Well, yes I have. It's been a few years, though.
I just want the third brake light back on my Jeep.
Then again, I'm looking for a cheap Hypercharger for my Harley and
can't find one of them, either(which surprises me as much as people
bash*them* too).
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
#48
Guest
Posts: n/a
Re: Trailer wiring question
On Wed, 18 Jul 2007 09:14:14 -0700, "L.W. \(Bill\) ------ III"
<LWBill------@------.net> wrote:
> Sounds like you've never been to Tijuana.
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Well, yes I have. It's been a few years, though.
I just want the third brake light back on my Jeep.
Then again, I'm looking for a cheap Hypercharger for my Harley and
can't find one of them, either(which surprises me as much as people
bash*them* too).
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
<LWBill------@------.net> wrote:
> Sounds like you've never been to Tijuana.
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Well, yes I have. It's been a few years, though.
I just want the third brake light back on my Jeep.
Then again, I'm looking for a cheap Hypercharger for my Harley and
can't find one of them, either(which surprises me as much as people
bash*them* too).
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
#49
Guest
Posts: n/a
Re: Trailer wiring question
On Wed, 18 Jul 2007 09:14:14 -0700, "L.W. \(Bill\) ------ III"
<LWBill------@------.net> wrote:
> Sounds like you've never been to Tijuana.
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Well, yes I have. It's been a few years, though.
I just want the third brake light back on my Jeep.
Then again, I'm looking for a cheap Hypercharger for my Harley and
can't find one of them, either(which surprises me as much as people
bash*them* too).
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
<LWBill------@------.net> wrote:
> Sounds like you've never been to Tijuana.
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Well, yes I have. It's been a few years, though.
I just want the third brake light back on my Jeep.
Then again, I'm looking for a cheap Hypercharger for my Harley and
can't find one of them, either(which surprises me as much as people
bash*them* too).
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
#50
Guest
Posts: n/a
Re: Trailer wiring question
You bought a device that is looking for a system that has a turn signal
separate from the brake lights. You need a device that connects to all of
the wires, then can isolate via diodes the turn indicators and use the
signal to the brake lights.
"Garth Almgren" <nospam@mukyj.com> wrote in message
news:5g2qu4F3e9u76U1@mid.individual.net...
> So, I just picked up a cheap hitch cover with LED brake light built in
> that plugs into the trailer wiring connector. Problem is, it only taps
> the green lead, so the light behaves exactly like the right brake/turn
> light and blinks when I'm signaling right.
>
> My goals are as follows:
> 1) Have the hitch light be on when the brakes are on.
> 2) Have the hitch light NOT blink when either turn signal is on.
> 3) Not damage my Jeep's electrical system in any way.
>
> The question is this: Can I use an isolating diode (like the Roadmaster
> Hy-Power) to connect both the left (yellow) and right (green) feeds
> together and use that as an input for the LED array?
>
> My thinking is that when the brakes are on, I've got #1 covered, since
> both inputs to the diode are giving a solid 12v. When one turn signal or
> the other is on, the light will still be getting a solid 12v from
> whichever light isn't blinking, taking care of #2. I'm still good on #3
> as well, since the diode would protect the left and right circuits from
> interfering with each other.
>
> I think I've got this right and was just going to start experimenting,
> but first I wanted someone with more electronics experience to check my
> thinking so I wouldn't accidentally miss goal #3. :)
>
>
> --
> ~/Garth - 1993 Wrangler S 2.5
> { }|||||||{ } "MukYJ"
separate from the brake lights. You need a device that connects to all of
the wires, then can isolate via diodes the turn indicators and use the
signal to the brake lights.
"Garth Almgren" <nospam@mukyj.com> wrote in message
news:5g2qu4F3e9u76U1@mid.individual.net...
> So, I just picked up a cheap hitch cover with LED brake light built in
> that plugs into the trailer wiring connector. Problem is, it only taps
> the green lead, so the light behaves exactly like the right brake/turn
> light and blinks when I'm signaling right.
>
> My goals are as follows:
> 1) Have the hitch light be on when the brakes are on.
> 2) Have the hitch light NOT blink when either turn signal is on.
> 3) Not damage my Jeep's electrical system in any way.
>
> The question is this: Can I use an isolating diode (like the Roadmaster
> Hy-Power) to connect both the left (yellow) and right (green) feeds
> together and use that as an input for the LED array?
>
> My thinking is that when the brakes are on, I've got #1 covered, since
> both inputs to the diode are giving a solid 12v. When one turn signal or
> the other is on, the light will still be getting a solid 12v from
> whichever light isn't blinking, taking care of #2. I'm still good on #3
> as well, since the diode would protect the left and right circuits from
> interfering with each other.
>
> I think I've got this right and was just going to start experimenting,
> but first I wanted someone with more electronics experience to check my
> thinking so I wouldn't accidentally miss goal #3. :)
>
>
> --
> ~/Garth - 1993 Wrangler S 2.5
> { }|||||||{ } "MukYJ"