Trailer Wiring Problem
05-31-2005, 12:44 PM
#11
Guest
Posts: n/a
Re: Trailer Wiring Problem
Unfortunately every vehicle manufacturer uses their own color coding system
for trailer wires. This has been a pet peeve of mine for years, but anyway,
this should fix you up:
The taillight wires on the trailer harness are brown, they should both go to
the green wire on the vehicle.
The left turn wire on the trailer is yellow and should go to the red wire on
the vehicle.
The right turn wire on the trailer is green and should go to the brown wire
on the vehicle.
Here is a pretty decent site for all the color codes:
http://www.etrailer.com/faq/wiring.asp
Chris
"----" <LeadWinger> wrote in message
news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com...
> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
>
> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
> >7 wires blue, yellow, green, brown and red 14? gauge and black and
> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
> >and brown &yellow for the left tail/brake and a white ground. when
> >hooked up color to color exept for white (white trailer wire grounded
> >to XJ), black, red and blue. The left turn signal doesn't flash, right
> >turn flashes both sides, brake lights up both correctly. I can't figure
> >it out, any help will be appreciated. Thanks
>
> 1 = White = Ground
> 2 = Blue = Trailer Brakes
> 3 = Green = Tail Lamps
> 4 = Black = 12-volts DC
> 5 = Red = Left Turn & Brake
> 6 = Brown = Right Turn & Brake
> 7 = Yellow = Backup Lamps
for trailer wires. This has been a pet peeve of mine for years, but anyway,
this should fix you up:
The taillight wires on the trailer harness are brown, they should both go to
the green wire on the vehicle.
The left turn wire on the trailer is yellow and should go to the red wire on
the vehicle.
The right turn wire on the trailer is green and should go to the brown wire
on the vehicle.
Here is a pretty decent site for all the color codes:
http://www.etrailer.com/faq/wiring.asp
Chris
"----" <LeadWinger> wrote in message
news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com...
> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
>
> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
> >7 wires blue, yellow, green, brown and red 14? gauge and black and
> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
> >and brown &yellow for the left tail/brake and a white ground. when
> >hooked up color to color exept for white (white trailer wire grounded
> >to XJ), black, red and blue. The left turn signal doesn't flash, right
> >turn flashes both sides, brake lights up both correctly. I can't figure
> >it out, any help will be appreciated. Thanks
>
> 1 = White = Ground
> 2 = Blue = Trailer Brakes
> 3 = Green = Tail Lamps
> 4 = Black = 12-volts DC
> 5 = Red = Left Turn & Brake
> 6 = Brown = Right Turn & Brake
> 7 = Yellow = Backup Lamps
05-31-2005, 12:44 PM
#12
Guest
Posts: n/a
Re: Trailer Wiring Problem
Unfortunately every vehicle manufacturer uses their own color coding system
for trailer wires. This has been a pet peeve of mine for years, but anyway,
this should fix you up:
The taillight wires on the trailer harness are brown, they should both go to
the green wire on the vehicle.
The left turn wire on the trailer is yellow and should go to the red wire on
the vehicle.
The right turn wire on the trailer is green and should go to the brown wire
on the vehicle.
Here is a pretty decent site for all the color codes:
http://www.etrailer.com/faq/wiring.asp
Chris
"----" <LeadWinger> wrote in message
news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com...
> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
>
> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
> >7 wires blue, yellow, green, brown and red 14? gauge and black and
> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
> >and brown &yellow for the left tail/brake and a white ground. when
> >hooked up color to color exept for white (white trailer wire grounded
> >to XJ), black, red and blue. The left turn signal doesn't flash, right
> >turn flashes both sides, brake lights up both correctly. I can't figure
> >it out, any help will be appreciated. Thanks
>
> 1 = White = Ground
> 2 = Blue = Trailer Brakes
> 3 = Green = Tail Lamps
> 4 = Black = 12-volts DC
> 5 = Red = Left Turn & Brake
> 6 = Brown = Right Turn & Brake
> 7 = Yellow = Backup Lamps
for trailer wires. This has been a pet peeve of mine for years, but anyway,
this should fix you up:
The taillight wires on the trailer harness are brown, they should both go to
the green wire on the vehicle.
The left turn wire on the trailer is yellow and should go to the red wire on
the vehicle.
The right turn wire on the trailer is green and should go to the brown wire
on the vehicle.
Here is a pretty decent site for all the color codes:
http://www.etrailer.com/faq/wiring.asp
Chris
"----" <LeadWinger> wrote in message
news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com...
> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
>
> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
> >7 wires blue, yellow, green, brown and red 14? gauge and black and
> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
> >and brown &yellow for the left tail/brake and a white ground. when
> >hooked up color to color exept for white (white trailer wire grounded
> >to XJ), black, red and blue. The left turn signal doesn't flash, right
> >turn flashes both sides, brake lights up both correctly. I can't figure
> >it out, any help will be appreciated. Thanks
>
> 1 = White = Ground
> 2 = Blue = Trailer Brakes
> 3 = Green = Tail Lamps
> 4 = Black = 12-volts DC
> 5 = Red = Left Turn & Brake
> 6 = Brown = Right Turn & Brake
> 7 = Yellow = Backup Lamps
05-31-2005, 12:44 PM
#13
Guest
Posts: n/a
Re: Trailer Wiring Problem
Unfortunately every vehicle manufacturer uses their own color coding system
for trailer wires. This has been a pet peeve of mine for years, but anyway,
this should fix you up:
The taillight wires on the trailer harness are brown, they should both go to
the green wire on the vehicle.
The left turn wire on the trailer is yellow and should go to the red wire on
the vehicle.
The right turn wire on the trailer is green and should go to the brown wire
on the vehicle.
Here is a pretty decent site for all the color codes:
http://www.etrailer.com/faq/wiring.asp
Chris
"----" <LeadWinger> wrote in message
news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com...
> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
>
> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
> >7 wires blue, yellow, green, brown and red 14? gauge and black and
> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
> >and brown &yellow for the left tail/brake and a white ground. when
> >hooked up color to color exept for white (white trailer wire grounded
> >to XJ), black, red and blue. The left turn signal doesn't flash, right
> >turn flashes both sides, brake lights up both correctly. I can't figure
> >it out, any help will be appreciated. Thanks
>
> 1 = White = Ground
> 2 = Blue = Trailer Brakes
> 3 = Green = Tail Lamps
> 4 = Black = 12-volts DC
> 5 = Red = Left Turn & Brake
> 6 = Brown = Right Turn & Brake
> 7 = Yellow = Backup Lamps
for trailer wires. This has been a pet peeve of mine for years, but anyway,
this should fix you up:
The taillight wires on the trailer harness are brown, they should both go to
the green wire on the vehicle.
The left turn wire on the trailer is yellow and should go to the red wire on
the vehicle.
The right turn wire on the trailer is green and should go to the brown wire
on the vehicle.
Here is a pretty decent site for all the color codes:
http://www.etrailer.com/faq/wiring.asp
Chris
"----" <LeadWinger> wrote in message
news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com...
> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
>
> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
> >7 wires blue, yellow, green, brown and red 14? gauge and black and
> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
> >and brown &yellow for the left tail/brake and a white ground. when
> >hooked up color to color exept for white (white trailer wire grounded
> >to XJ), black, red and blue. The left turn signal doesn't flash, right
> >turn flashes both sides, brake lights up both correctly. I can't figure
> >it out, any help will be appreciated. Thanks
>
> 1 = White = Ground
> 2 = Blue = Trailer Brakes
> 3 = Green = Tail Lamps
> 4 = Black = 12-volts DC
> 5 = Red = Left Turn & Brake
> 6 = Brown = Right Turn & Brake
> 7 = Yellow = Backup Lamps
05-31-2005, 02:16 PM
#14
Guest
Posts: n/a
Re: Trailer Wiring Problem
True enough, but the color codes I listed below came directly off the
instructions included with the factory pigtail for our Grand Cherokee.
The colors do match what the OP listed for his XJ, so I assume they
are correct.
----
On Tue, 31 May 2005 16:44:10 GMT, "c" <c@me.org> wrote:
>Unfortunately every vehicle manufacturer uses their own color coding system
>for trailer wires. This has been a pet peeve of mine for years, but anyway,
>this should fix you up:
>
>The taillight wires on the trailer harness are brown, they should both go to
>the green wire on the vehicle.
>The left turn wire on the trailer is yellow and should go to the red wire on
>the vehicle.
>The right turn wire on the trailer is green and should go to the brown wire
>on the vehicle.
>
>Here is a pretty decent site for all the color codes:
>http://www.etrailer.com/faq/wiring.asp
>
>Chris
>
>
>
>"----" <LeadWinger> wrote in message
>news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com.. .
>> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
>>
>> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
>> >7 wires blue, yellow, green, brown and red 14? gauge and black and
>> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
>> >and brown &yellow for the left tail/brake and a white ground. when
>> >hooked up color to color exept for white (white trailer wire grounded
>> >to XJ), black, red and blue. The left turn signal doesn't flash, right
>> >turn flashes both sides, brake lights up both correctly. I can't figure
>> >it out, any help will be appreciated. Thanks
>>
>> 1 = White = Ground
>> 2 = Blue = Trailer Brakes
>> 3 = Green = Tail Lamps
>> 4 = Black = 12-volts DC
>> 5 = Red = Left Turn & Brake
>> 6 = Brown = Right Turn & Brake
>> 7 = Yellow = Backup Lamps
>
instructions included with the factory pigtail for our Grand Cherokee.
The colors do match what the OP listed for his XJ, so I assume they
are correct.
----
On Tue, 31 May 2005 16:44:10 GMT, "c" <c@me.org> wrote:
>Unfortunately every vehicle manufacturer uses their own color coding system
>for trailer wires. This has been a pet peeve of mine for years, but anyway,
>this should fix you up:
>
>The taillight wires on the trailer harness are brown, they should both go to
>the green wire on the vehicle.
>The left turn wire on the trailer is yellow and should go to the red wire on
>the vehicle.
>The right turn wire on the trailer is green and should go to the brown wire
>on the vehicle.
>
>Here is a pretty decent site for all the color codes:
>http://www.etrailer.com/faq/wiring.asp
>
>Chris
>
>
>
>"----" <LeadWinger> wrote in message
>news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com.. .
>> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
>>
>> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
>> >7 wires blue, yellow, green, brown and red 14? gauge and black and
>> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
>> >and brown &yellow for the left tail/brake and a white ground. when
>> >hooked up color to color exept for white (white trailer wire grounded
>> >to XJ), black, red and blue. The left turn signal doesn't flash, right
>> >turn flashes both sides, brake lights up both correctly. I can't figure
>> >it out, any help will be appreciated. Thanks
>>
>> 1 = White = Ground
>> 2 = Blue = Trailer Brakes
>> 3 = Green = Tail Lamps
>> 4 = Black = 12-volts DC
>> 5 = Red = Left Turn & Brake
>> 6 = Brown = Right Turn & Brake
>> 7 = Yellow = Backup Lamps
>
05-31-2005, 02:16 PM
#15
Guest
Posts: n/a
Re: Trailer Wiring Problem
True enough, but the color codes I listed below came directly off the
instructions included with the factory pigtail for our Grand Cherokee.
The colors do match what the OP listed for his XJ, so I assume they
are correct.
----
On Tue, 31 May 2005 16:44:10 GMT, "c" <c@me.org> wrote:
>Unfortunately every vehicle manufacturer uses their own color coding system
>for trailer wires. This has been a pet peeve of mine for years, but anyway,
>this should fix you up:
>
>The taillight wires on the trailer harness are brown, they should both go to
>the green wire on the vehicle.
>The left turn wire on the trailer is yellow and should go to the red wire on
>the vehicle.
>The right turn wire on the trailer is green and should go to the brown wire
>on the vehicle.
>
>Here is a pretty decent site for all the color codes:
>http://www.etrailer.com/faq/wiring.asp
>
>Chris
>
>
>
>"----" <LeadWinger> wrote in message
>news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com.. .
>> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
>>
>> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
>> >7 wires blue, yellow, green, brown and red 14? gauge and black and
>> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
>> >and brown &yellow for the left tail/brake and a white ground. when
>> >hooked up color to color exept for white (white trailer wire grounded
>> >to XJ), black, red and blue. The left turn signal doesn't flash, right
>> >turn flashes both sides, brake lights up both correctly. I can't figure
>> >it out, any help will be appreciated. Thanks
>>
>> 1 = White = Ground
>> 2 = Blue = Trailer Brakes
>> 3 = Green = Tail Lamps
>> 4 = Black = 12-volts DC
>> 5 = Red = Left Turn & Brake
>> 6 = Brown = Right Turn & Brake
>> 7 = Yellow = Backup Lamps
>
instructions included with the factory pigtail for our Grand Cherokee.
The colors do match what the OP listed for his XJ, so I assume they
are correct.
----
On Tue, 31 May 2005 16:44:10 GMT, "c" <c@me.org> wrote:
>Unfortunately every vehicle manufacturer uses their own color coding system
>for trailer wires. This has been a pet peeve of mine for years, but anyway,
>this should fix you up:
>
>The taillight wires on the trailer harness are brown, they should both go to
>the green wire on the vehicle.
>The left turn wire on the trailer is yellow and should go to the red wire on
>the vehicle.
>The right turn wire on the trailer is green and should go to the brown wire
>on the vehicle.
>
>Here is a pretty decent site for all the color codes:
>http://www.etrailer.com/faq/wiring.asp
>
>Chris
>
>
>
>"----" <LeadWinger> wrote in message
>news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com.. .
>> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
>>
>> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
>> >7 wires blue, yellow, green, brown and red 14? gauge and black and
>> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
>> >and brown &yellow for the left tail/brake and a white ground. when
>> >hooked up color to color exept for white (white trailer wire grounded
>> >to XJ), black, red and blue. The left turn signal doesn't flash, right
>> >turn flashes both sides, brake lights up both correctly. I can't figure
>> >it out, any help will be appreciated. Thanks
>>
>> 1 = White = Ground
>> 2 = Blue = Trailer Brakes
>> 3 = Green = Tail Lamps
>> 4 = Black = 12-volts DC
>> 5 = Red = Left Turn & Brake
>> 6 = Brown = Right Turn & Brake
>> 7 = Yellow = Backup Lamps
>
05-31-2005, 02:16 PM
#16
Guest
Posts: n/a
Re: Trailer Wiring Problem
True enough, but the color codes I listed below came directly off the
instructions included with the factory pigtail for our Grand Cherokee.
The colors do match what the OP listed for his XJ, so I assume they
are correct.
----
On Tue, 31 May 2005 16:44:10 GMT, "c" <c@me.org> wrote:
>Unfortunately every vehicle manufacturer uses their own color coding system
>for trailer wires. This has been a pet peeve of mine for years, but anyway,
>this should fix you up:
>
>The taillight wires on the trailer harness are brown, they should both go to
>the green wire on the vehicle.
>The left turn wire on the trailer is yellow and should go to the red wire on
>the vehicle.
>The right turn wire on the trailer is green and should go to the brown wire
>on the vehicle.
>
>Here is a pretty decent site for all the color codes:
>http://www.etrailer.com/faq/wiring.asp
>
>Chris
>
>
>
>"----" <LeadWinger> wrote in message
>news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com.. .
>> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
>>
>> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
>> >7 wires blue, yellow, green, brown and red 14? gauge and black and
>> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
>> >and brown &yellow for the left tail/brake and a white ground. when
>> >hooked up color to color exept for white (white trailer wire grounded
>> >to XJ), black, red and blue. The left turn signal doesn't flash, right
>> >turn flashes both sides, brake lights up both correctly. I can't figure
>> >it out, any help will be appreciated. Thanks
>>
>> 1 = White = Ground
>> 2 = Blue = Trailer Brakes
>> 3 = Green = Tail Lamps
>> 4 = Black = 12-volts DC
>> 5 = Red = Left Turn & Brake
>> 6 = Brown = Right Turn & Brake
>> 7 = Yellow = Backup Lamps
>
instructions included with the factory pigtail for our Grand Cherokee.
The colors do match what the OP listed for his XJ, so I assume they
are correct.
----
On Tue, 31 May 2005 16:44:10 GMT, "c" <c@me.org> wrote:
>Unfortunately every vehicle manufacturer uses their own color coding system
>for trailer wires. This has been a pet peeve of mine for years, but anyway,
>this should fix you up:
>
>The taillight wires on the trailer harness are brown, they should both go to
>the green wire on the vehicle.
>The left turn wire on the trailer is yellow and should go to the red wire on
>the vehicle.
>The right turn wire on the trailer is green and should go to the brown wire
>on the vehicle.
>
>Here is a pretty decent site for all the color codes:
>http://www.etrailer.com/faq/wiring.asp
>
>Chris
>
>
>
>"----" <LeadWinger> wrote in message
>news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com.. .
>> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
>>
>> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
>> >7 wires blue, yellow, green, brown and red 14? gauge and black and
>> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
>> >and brown &yellow for the left tail/brake and a white ground. when
>> >hooked up color to color exept for white (white trailer wire grounded
>> >to XJ), black, red and blue. The left turn signal doesn't flash, right
>> >turn flashes both sides, brake lights up both correctly. I can't figure
>> >it out, any help will be appreciated. Thanks
>>
>> 1 = White = Ground
>> 2 = Blue = Trailer Brakes
>> 3 = Green = Tail Lamps
>> 4 = Black = 12-volts DC
>> 5 = Red = Left Turn & Brake
>> 6 = Brown = Right Turn & Brake
>> 7 = Yellow = Backup Lamps
>
05-31-2005, 02:16 PM
#17
Guest
Posts: n/a
Re: Trailer Wiring Problem
True enough, but the color codes I listed below came directly off the
instructions included with the factory pigtail for our Grand Cherokee.
The colors do match what the OP listed for his XJ, so I assume they
are correct.
----
On Tue, 31 May 2005 16:44:10 GMT, "c" <c@me.org> wrote:
>Unfortunately every vehicle manufacturer uses their own color coding system
>for trailer wires. This has been a pet peeve of mine for years, but anyway,
>this should fix you up:
>
>The taillight wires on the trailer harness are brown, they should both go to
>the green wire on the vehicle.
>The left turn wire on the trailer is yellow and should go to the red wire on
>the vehicle.
>The right turn wire on the trailer is green and should go to the brown wire
>on the vehicle.
>
>Here is a pretty decent site for all the color codes:
>http://www.etrailer.com/faq/wiring.asp
>
>Chris
>
>
>
>"----" <LeadWinger> wrote in message
>news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com.. .
>> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
>>
>> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
>> >7 wires blue, yellow, green, brown and red 14? gauge and black and
>> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
>> >and brown &yellow for the left tail/brake and a white ground. when
>> >hooked up color to color exept for white (white trailer wire grounded
>> >to XJ), black, red and blue. The left turn signal doesn't flash, right
>> >turn flashes both sides, brake lights up both correctly. I can't figure
>> >it out, any help will be appreciated. Thanks
>>
>> 1 = White = Ground
>> 2 = Blue = Trailer Brakes
>> 3 = Green = Tail Lamps
>> 4 = Black = 12-volts DC
>> 5 = Red = Left Turn & Brake
>> 6 = Brown = Right Turn & Brake
>> 7 = Yellow = Backup Lamps
>
instructions included with the factory pigtail for our Grand Cherokee.
The colors do match what the OP listed for his XJ, so I assume they
are correct.
----
On Tue, 31 May 2005 16:44:10 GMT, "c" <c@me.org> wrote:
>Unfortunately every vehicle manufacturer uses their own color coding system
>for trailer wires. This has been a pet peeve of mine for years, but anyway,
>this should fix you up:
>
>The taillight wires on the trailer harness are brown, they should both go to
>the green wire on the vehicle.
>The left turn wire on the trailer is yellow and should go to the red wire on
>the vehicle.
>The right turn wire on the trailer is green and should go to the brown wire
>on the vehicle.
>
>Here is a pretty decent site for all the color codes:
>http://www.etrailer.com/faq/wiring.asp
>
>Chris
>
>
>
>"----" <LeadWinger> wrote in message
>news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com.. .
>> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
>>
>> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
>> >7 wires blue, yellow, green, brown and red 14? gauge and black and
>> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
>> >and brown &yellow for the left tail/brake and a white ground. when
>> >hooked up color to color exept for white (white trailer wire grounded
>> >to XJ), black, red and blue. The left turn signal doesn't flash, right
>> >turn flashes both sides, brake lights up both correctly. I can't figure
>> >it out, any help will be appreciated. Thanks
>>
>> 1 = White = Ground
>> 2 = Blue = Trailer Brakes
>> 3 = Green = Tail Lamps
>> 4 = Black = 12-volts DC
>> 5 = Red = Left Turn & Brake
>> 6 = Brown = Right Turn & Brake
>> 7 = Yellow = Backup Lamps
>
05-31-2005, 02:40 PM
#18
Guest
Posts: n/a
Re: Trailer Wiring Problem
---- wrote:
> True enough, but the color codes I listed below came directly off the
> instructions included with the factory pigtail for our Grand Cherokee.
> The colors do match what the OP listed for his XJ, so I assume they
> are correct.
>
> ----
>
> On Tue, 31 May 2005 16:44:10 GMT, "c" <c@me.org> wrote:
>
> >Unfortunately every vehicle manufacturer uses their own color coding system
> >for trailer wires. This has been a pet peeve of mine for years, but anyway,
> >this should fix you up:
> >
> >The taillight wires on the trailer harness are brown, they should both go to
> >the green wire on the vehicle.
> >The left turn wire on the trailer is yellow and should go to the red wire on
> >the vehicle.
> >The right turn wire on the trailer is green and should go to the brown wire
> >on the vehicle.
> >
> >Here is a pretty decent site for all the color codes:
> >http://www.etrailer.com/faq/wiring.asp
> >
> >Chris
> >
> >
> >
> >"----" <LeadWinger> wrote in message
> >news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com.. .
> >> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
> >>
> >> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
> >> >7 wires blue, yellow, green, brown and red 14? gauge and black and
> >> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
> >> >and brown &yellow for the left tail/brake and a white ground. when
> >> >hooked up color to color exept for white (white trailer wire grounded
> >> >to XJ), black, red and blue. The left turn signal doesn't flash, right
> >> >turn flashes both sides, brake lights up both correctly. I can't figure
> >> >it out, any help will be appreciated. Thanks
> >>
> >> 1 = White = Ground
> >> 2 = Blue = Trailer Brakes
> >> 3 = Green = Tail Lamps
> >> 4 = Black = 12-volts DC
> >> 5 = Red = Left Turn & Brake
> >> 6 = Brown = Right Turn & Brake
> >> 7 = Yellow = Backup Lamps
> >
Thanks all, I,m going to try it after work and will let you know how it
went.
John K
05-31-2005, 02:40 PM
#19
Guest
Posts: n/a
Re: Trailer Wiring Problem
---- wrote:
> True enough, but the color codes I listed below came directly off the
> instructions included with the factory pigtail for our Grand Cherokee.
> The colors do match what the OP listed for his XJ, so I assume they
> are correct.
>
> ----
>
> On Tue, 31 May 2005 16:44:10 GMT, "c" <c@me.org> wrote:
>
> >Unfortunately every vehicle manufacturer uses their own color coding system
> >for trailer wires. This has been a pet peeve of mine for years, but anyway,
> >this should fix you up:
> >
> >The taillight wires on the trailer harness are brown, they should both go to
> >the green wire on the vehicle.
> >The left turn wire on the trailer is yellow and should go to the red wire on
> >the vehicle.
> >The right turn wire on the trailer is green and should go to the brown wire
> >on the vehicle.
> >
> >Here is a pretty decent site for all the color codes:
> >http://www.etrailer.com/faq/wiring.asp
> >
> >Chris
> >
> >
> >
> >"----" <LeadWinger> wrote in message
> >news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com.. .
> >> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
> >>
> >> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
> >> >7 wires blue, yellow, green, brown and red 14? gauge and black and
> >> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
> >> >and brown &yellow for the left tail/brake and a white ground. when
> >> >hooked up color to color exept for white (white trailer wire grounded
> >> >to XJ), black, red and blue. The left turn signal doesn't flash, right
> >> >turn flashes both sides, brake lights up both correctly. I can't figure
> >> >it out, any help will be appreciated. Thanks
> >>
> >> 1 = White = Ground
> >> 2 = Blue = Trailer Brakes
> >> 3 = Green = Tail Lamps
> >> 4 = Black = 12-volts DC
> >> 5 = Red = Left Turn & Brake
> >> 6 = Brown = Right Turn & Brake
> >> 7 = Yellow = Backup Lamps
> >
Thanks all, I,m going to try it after work and will let you know how it
went.
John K
05-31-2005, 02:40 PM
#20
Guest
Posts: n/a
Re: Trailer Wiring Problem
---- wrote:
> True enough, but the color codes I listed below came directly off the
> instructions included with the factory pigtail for our Grand Cherokee.
> The colors do match what the OP listed for his XJ, so I assume they
> are correct.
>
> ----
>
> On Tue, 31 May 2005 16:44:10 GMT, "c" <c@me.org> wrote:
>
> >Unfortunately every vehicle manufacturer uses their own color coding system
> >for trailer wires. This has been a pet peeve of mine for years, but anyway,
> >this should fix you up:
> >
> >The taillight wires on the trailer harness are brown, they should both go to
> >the green wire on the vehicle.
> >The left turn wire on the trailer is yellow and should go to the red wire on
> >the vehicle.
> >The right turn wire on the trailer is green and should go to the brown wire
> >on the vehicle.
> >
> >Here is a pretty decent site for all the color codes:
> >http://www.etrailer.com/faq/wiring.asp
> >
> >Chris
> >
> >
> >
> >"----" <LeadWinger> wrote in message
> >news:mtnn91d194nof7dl974p0j2ts05kmgq2kg@4ax.com.. .
> >> On 30 May 2005 14:52:22 -0700, JRK58@MSN.COM wrote:
> >>
> >> >Hey All, I have a 90 XJ with a stock Class 4 Hitch. The stock plug has
> >> >7 wires blue, yellow, green, brown and red 14? gauge and black and
> >> >white 10? gauge.Trailer has 5 wires brown & green for right tail/brake
> >> >and brown &yellow for the left tail/brake and a white ground. when
> >> >hooked up color to color exept for white (white trailer wire grounded
> >> >to XJ), black, red and blue. The left turn signal doesn't flash, right
> >> >turn flashes both sides, brake lights up both correctly. I can't figure
> >> >it out, any help will be appreciated. Thanks
> >>
> >> 1 = White = Ground
> >> 2 = Blue = Trailer Brakes
> >> 3 = Green = Tail Lamps
> >> 4 = Black = 12-volts DC
> >> 5 = Red = Left Turn & Brake
> >> 6 = Brown = Right Turn & Brake
> >> 7 = Yellow = Backup Lamps
> >
Thanks all, I,m going to try it after work and will let you know how it
went.
John K