L.W. \(Bill\) Hughes III

This from the biggest spammer of them all! The jealous, really weak
jealous, I can't believe how jealous this little draft dodging coward
schizophrenic psychopath liar was hiding in Vancouver via
S0106000ea6ba70e7.vn.shawcable.net 24.86.24.251 intrepidator@shaw.ca until I
killed it. Now he's using another IP of 24.80.200.127
s0106000ea6ba70e7.vc.shawcable.net who's only way to get attention is to
make a fool of its self using foul language, like it did back in elementary
school yard. But, too afraid to use it's name and address, and take on
responsibility like a grown up. With an obsession with perverts and goats,
where it writes via remailers, @news.alt.net, and cross posts to other
perverts to no one's surprise. With extreme jealous ranting over my
documents, possessions, successes, manliness and fine, Southern California
surfing body, beard, and loving Christian family. Committing forgery over
many of my posts, proving I'm a responsible American man. You remind me of a
little rat dog, like a Mexican Chiwawa with its senseless barking, me too,
me too. You're even more senile than I first thought. And the poor thing,
you're too girlie to take responsibility for yourself again, by signing your
statement like a man.
That really thinks the group's members are so stupid not to know it's
the same coward, posting over and over again using a schizophrenic
psychopath forged up names?
You're not worth any more time when a cut and paste this same
paragraphs it fits so well!
But, now worth a forwarding to: internet.help@shaw.ca,
security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@aioe.org,
admin@***.net for forgery.
Who said it also likes baby monkeys sucking their -----, like his buddy
posted on an auto picture group at:
news:0u7g43dkje4pdkqi07hl66s8kpifo564k1@4ax.com
I thought this traitor's attacks were just over personal disagreements,
but in reality these attacks stemming from my love of God and America on
Independents Week, I realized you are actually attacking my country, and
that's what you've been doing all along is declaring your hatred for the
United States of America, with each declaration of my signature, but just
too cowardly and stupid to be a ---------. It's America, love it, or leave
it, so keep the f*ck out!
Or let me know when you cross my American border, so I may arrest you!
YOU ARE A TRAITOR and lost all rights to my American border, and
someday I'll have you in jail where you belong! Any time, I'll fly and meant
with other patriots guarding our borders against vermin like you.
Why don't you call the San Diego Sheriffs Department at 858-974-2020
YOU NEED HELP!
The moral majority say you are not only *******, but cowards
You wouldn't know about business as you have never succeeded and
anything.
Tell me when you are about to cross my American border and I'll fly up
and arrange at meeting with the U.S. Border patrol and Minutemen for your
arrest, after you give me your name, address, date, and meeting place.
I would appreciate the name and address of these trolls, Square Wheel:
shaw.ca 24.80.200.127 s0106000ea6ba70e7.vc.shawcable.net
intrepidator@shaw.ca and 24bit: 12.205.158.32 AT&T WorldNet Services ATT
Mediacom Communications Corp. I will keep your name in confidence, kindly
email -------------------- or LW------@------.net
Sincerely,
Llewellyn W. (Bill) ------ III
Fortunately it is against the law for you to own a firearm.
You are the one that ran to Canada from your obligation to the U.S.
Military! YOU ARE A TRAITOR and a COWARD!!!!!!
Totally lacking in common sense. You pathetic little schizophrenic
psychopath, you make me laugh the way a girlie, ------ writes, it gives me a
feeling of extreme superiority! <ROTFLMAO>
And you think the news members won't catch on and be able to see your
pursuing *** names, as fake as you.
Just making sure the ******* at: alt.binaries.pictures.autos,
alt.binaries.automobile.pictures groups know what an a**hole you, aka SW
really are!!!!!
God, where do they find these REALLY STUPID queer traitors keep
following me around? With even more jealous girlie maricón acosador
gibberish/babbling
You pathetic little schizophrenic psychopath, you make me laugh the way a
girlie, ------ writes, it gives me a feeling of extreme superiority!
<ROTFLMAO>
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"Pink Freud©®" <drive-in-lobotomies@trepanation.calm> wrote in message
news:pan.2007.11.02.02.27.20.726014@trepanation.ca lm...
>
> Or do you possibly mean a pair about the size of the ones possessed by the
> guy pulling the wool over his own eyes and throwing his morbidly obese
> weight around here?
>
> --

Stupendous Man

I am concerned about the aluminum hitches on the market. In a few years I
believe they will begin to snap from metal fatigue and kill some people
before being taken off the market.

--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

Stupendous Man

I am concerned about the aluminum hitches on the market. In a few years I
believe they will begin to snap from metal fatigue and kill some people
before being taken off the market.

--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

Stupendous Man

I am concerned about the aluminum hitches on the market. In a few years I
believe they will begin to snap from metal fatigue and kill some people
before being taken off the market.

--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

Jeff Strickland

"SnoMan" <admin@snoman.com> wrote in message
news:n7nji3h04umlfik3atgj3h7blrn9eg910t@4ax.com...
> On Wed, 31 Oct 2007 21:53:24 -0500, "James" <jnipperxxx@nospamfdn.com>
> wrote:
>
>>Yes, I am aware of this.
>>
>>James
>>-----------------------
>>You know the receiver is the the thing that fits into the square hole on
>>the
>>back of your Jeep, right? The size of the hole dictates the size of the
>>receiver, but you can bolt various sizes of ball onto the receiver.
>>
>>You can buy a receiver that fits the hole at WalMart and other places, and
>>buy ***** that bolt to the receiver.
>>
>>
>>
>>
>
>
> I would suggest that if you plan to use a 1 7/8 ball that you get a
> reciever with a 3/4 inch hole in it as they can be had with 3/4, 1 and
> 1 1/4 inch holes (1 1/4 is for HD 2 5/16 ***** and generally not at
> WalMart). 1 7/8 inch ***** are usually 3/4 but I have seen one with a
> 5/8 once. 2 inch can be 3/4 or 1 inch (1 inch is rated higher trailer
> weight) and 2 5/16 can have a 1 inch or 1 1/4 shank (again bigger
> shank higher trailer weight rating) Anyway it is advisable to have the
> hole in receiver match the shank size for best the " grip" on it when
> ball is tightened down in/on it.
> -----------------
> TheSnoMan.com


These are good points.

By way of clarification, he is talking about the mounting bolt of the ball
and the hole on the receiver where the ball is mounted. DO NOT bolt a small
diameter ball to a large diameter hole. The bolt on the ball and the hole on
the receiver MUST be the same size.

Maybe that much clarification isn't needed ...

Jeff Strickland

"SnoMan" <admin@snoman.com> wrote in message
news:n7nji3h04umlfik3atgj3h7blrn9eg910t@4ax.com...
> On Wed, 31 Oct 2007 21:53:24 -0500, "James" <jnipperxxx@nospamfdn.com>
> wrote:
>
>>Yes, I am aware of this.
>>
>>James
>>-----------------------
>>You know the receiver is the the thing that fits into the square hole on
>>the
>>back of your Jeep, right? The size of the hole dictates the size of the
>>receiver, but you can bolt various sizes of ball onto the receiver.
>>
>>You can buy a receiver that fits the hole at WalMart and other places, and
>>buy ***** that bolt to the receiver.
>>
>>
>>
>>
>
>
> I would suggest that if you plan to use a 1 7/8 ball that you get a
> reciever with a 3/4 inch hole in it as they can be had with 3/4, 1 and
> 1 1/4 inch holes (1 1/4 is for HD 2 5/16 ***** and generally not at
> WalMart). 1 7/8 inch ***** are usually 3/4 but I have seen one with a
> 5/8 once. 2 inch can be 3/4 or 1 inch (1 inch is rated higher trailer
> weight) and 2 5/16 can have a 1 inch or 1 1/4 shank (again bigger
> shank higher trailer weight rating) Anyway it is advisable to have the
> hole in receiver match the shank size for best the " grip" on it when
> ball is tightened down in/on it.
> -----------------
> TheSnoMan.com


These are good points.

By way of clarification, he is talking about the mounting bolt of the ball
and the hole on the receiver where the ball is mounted. DO NOT bolt a small
diameter ball to a large diameter hole. The bolt on the ball and the hole on
the receiver MUST be the same size.

Maybe that much clarification isn't needed ...

Jeff Strickland

"SnoMan" <admin@snoman.com> wrote in message
news:n7nji3h04umlfik3atgj3h7blrn9eg910t@4ax.com...
> On Wed, 31 Oct 2007 21:53:24 -0500, "James" <jnipperxxx@nospamfdn.com>
> wrote:
>
>>Yes, I am aware of this.
>>
>>James
>>-----------------------
>>You know the receiver is the the thing that fits into the square hole on
>>the
>>back of your Jeep, right? The size of the hole dictates the size of the
>>receiver, but you can bolt various sizes of ball onto the receiver.
>>
>>You can buy a receiver that fits the hole at WalMart and other places, and
>>buy ***** that bolt to the receiver.
>>
>>
>>
>>
>
>
> I would suggest that if you plan to use a 1 7/8 ball that you get a
> reciever with a 3/4 inch hole in it as they can be had with 3/4, 1 and
> 1 1/4 inch holes (1 1/4 is for HD 2 5/16 ***** and generally not at
> WalMart). 1 7/8 inch ***** are usually 3/4 but I have seen one with a
> 5/8 once. 2 inch can be 3/4 or 1 inch (1 inch is rated higher trailer
> weight) and 2 5/16 can have a 1 inch or 1 1/4 shank (again bigger
> shank higher trailer weight rating) Anyway it is advisable to have the
> hole in receiver match the shank size for best the " grip" on it when
> ball is tightened down in/on it.
> -----------------
> TheSnoMan.com


These are good points.

By way of clarification, he is talking about the mounting bolt of the ball
and the hole on the receiver where the ball is mounted. DO NOT bolt a small
diameter ball to a large diameter hole. The bolt on the ball and the hole on
the receiver MUST be the same size.

Maybe that much clarification isn't needed ...

dave AKA vwdoc1

Harbor Freight has a reversible adapter that has both sizes on it already
for sale @ $13 only in their stores.
Here are the specs on it..........
http://www.harborfreight.com/cpi/cta...emnumber=94900
--
later,
dave AKA vwdoc1
88 XJ 4.0 auto


"Jeff Strickland" <crwlr@verizon.net> wrote in message
news:jZIWi.65$3j7.43@trnddc02...
>
> "SnoMan" <admin@snoman.com> wrote in message
> news:n7nji3h04umlfik3atgj3h7blrn9eg910t@4ax.com...
>> On Wed, 31 Oct 2007 21:53:24 -0500, "James" <jnipperxxx@nospamfdn.com>
>> wrote:
>>
>>>Yes, I am aware of this.
>>>
>>>James
>>>-----------------------
>>>You know the receiver is the the thing that fits into the square hole on
>>>the
>>>back of your Jeep, right? The size of the hole dictates the size of the
>>>receiver, but you can bolt various sizes of ball onto the receiver.
>>>
>>>You can buy a receiver that fits the hole at WalMart and other places,
>>>and
>>>buy ***** that bolt to the receiver.
>>>
>>>
>>>
>>>
>>
>>
>> I would suggest that if you plan to use a 1 7/8 ball that you get a
>> reciever with a 3/4 inch hole in it as they can be had with 3/4, 1 and
>> 1 1/4 inch holes (1 1/4 is for HD 2 5/16 ***** and generally not at
>> WalMart). 1 7/8 inch ***** are usually 3/4 but I have seen one with a
>> 5/8 once. 2 inch can be 3/4 or 1 inch (1 inch is rated higher trailer
>> weight) and 2 5/16 can have a 1 inch or 1 1/4 shank (again bigger
>> shank higher trailer weight rating) Anyway it is advisable to have the
>> hole in receiver match the shank size for best the " grip" on it when
>> ball is tightened down in/on it.
>> -----------------
>> TheSnoMan.com
>
>
> These are good points.
>
> By way of clarification, he is talking about the mounting bolt of the ball
> and the hole on the receiver where the ball is mounted. DO NOT bolt a
> small diameter ball to a large diameter hole. The bolt on the ball and the
> hole on the receiver MUST be the same size.
>
> Maybe that much clarification isn't needed ...
>
>
>
>

dave AKA vwdoc1

Harbor Freight has a reversible adapter that has both sizes on it already
for sale @ $13 only in their stores.
Here are the specs on it..........
http://www.harborfreight.com/cpi/cta...emnumber=94900
--
later,
dave AKA vwdoc1
88 XJ 4.0 auto


"Jeff Strickland" <crwlr@verizon.net> wrote in message
news:jZIWi.65$3j7.43@trnddc02...
>
> "SnoMan" <admin@snoman.com> wrote in message
> news:n7nji3h04umlfik3atgj3h7blrn9eg910t@4ax.com...
>> On Wed, 31 Oct 2007 21:53:24 -0500, "James" <jnipperxxx@nospamfdn.com>
>> wrote:
>>
>>>Yes, I am aware of this.
>>>
>>>James
>>>-----------------------
>>>You know the receiver is the the thing that fits into the square hole on
>>>the
>>>back of your Jeep, right? The size of the hole dictates the size of the
>>>receiver, but you can bolt various sizes of ball onto the receiver.
>>>
>>>You can buy a receiver that fits the hole at WalMart and other places,
>>>and
>>>buy ***** that bolt to the receiver.
>>>
>>>
>>>
>>>
>>
>>
>> I would suggest that if you plan to use a 1 7/8 ball that you get a
>> reciever with a 3/4 inch hole in it as they can be had with 3/4, 1 and
>> 1 1/4 inch holes (1 1/4 is for HD 2 5/16 ***** and generally not at
>> WalMart). 1 7/8 inch ***** are usually 3/4 but I have seen one with a
>> 5/8 once. 2 inch can be 3/4 or 1 inch (1 inch is rated higher trailer
>> weight) and 2 5/16 can have a 1 inch or 1 1/4 shank (again bigger
>> shank higher trailer weight rating) Anyway it is advisable to have the
>> hole in receiver match the shank size for best the " grip" on it when
>> ball is tightened down in/on it.
>> -----------------
>> TheSnoMan.com
>
>
> These are good points.
>
> By way of clarification, he is talking about the mounting bolt of the ball
> and the hole on the receiver where the ball is mounted. DO NOT bolt a
> small diameter ball to a large diameter hole. The bolt on the ball and the
> hole on the receiver MUST be the same size.
>
> Maybe that much clarification isn't needed ...
>
>
>
>

dave AKA vwdoc1

Harbor Freight has a reversible adapter that has both sizes on it already
for sale @ $13 only in their stores.
Here are the specs on it..........
http://www.harborfreight.com/cpi/cta...emnumber=94900
--
later,
dave AKA vwdoc1
88 XJ 4.0 auto


"Jeff Strickland" <crwlr@verizon.net> wrote in message
news:jZIWi.65$3j7.43@trnddc02...
>
> "SnoMan" <admin@snoman.com> wrote in message
> news:n7nji3h04umlfik3atgj3h7blrn9eg910t@4ax.com...
>> On Wed, 31 Oct 2007 21:53:24 -0500, "James" <jnipperxxx@nospamfdn.com>
>> wrote:
>>
>>>Yes, I am aware of this.
>>>
>>>James
>>>-----------------------
>>>You know the receiver is the the thing that fits into the square hole on
>>>the
>>>back of your Jeep, right? The size of the hole dictates the size of the
>>>receiver, but you can bolt various sizes of ball onto the receiver.
>>>
>>>You can buy a receiver that fits the hole at WalMart and other places,
>>>and
>>>buy ***** that bolt to the receiver.
>>>
>>>
>>>
>>>
>>
>>
>> I would suggest that if you plan to use a 1 7/8 ball that you get a
>> reciever with a 3/4 inch hole in it as they can be had with 3/4, 1 and
>> 1 1/4 inch holes (1 1/4 is for HD 2 5/16 ***** and generally not at
>> WalMart). 1 7/8 inch ***** are usually 3/4 but I have seen one with a
>> 5/8 once. 2 inch can be 3/4 or 1 inch (1 inch is rated higher trailer
>> weight) and 2 5/16 can have a 1 inch or 1 1/4 shank (again bigger
>> shank higher trailer weight rating) Anyway it is advisable to have the
>> hole in receiver match the shank size for best the " grip" on it when
>> ball is tightened down in/on it.
>> -----------------
>> TheSnoMan.com
>
>
> These are good points.
>
> By way of clarification, he is talking about the mounting bolt of the ball
> and the hole on the receiver where the ball is mounted. DO NOT bolt a
> small diameter ball to a large diameter hole. The bolt on the ball and the
> hole on the receiver MUST be the same size.
>
> Maybe that much clarification isn't needed ...
>
>
>
>