Trac - Loc
10-10-2005, 01:12 AM
#21
Guest
Posts: n/a
Re: Trac - Loc
The one I'm looking at is in an apparently good rear end with 4.10 gears.
It's located far away so I told him I just want the locker. You're probably
right -you usually are- .. I think I'll just shell out the $$ for a new one.
Is a locker difficult to install?
Carl
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4349F61C.30057296@***.net...
> I've never been lucky. I can see there it might a perfectly good in
> someone's gear change. But more than likely it was separated because the
> ring exploded. It will show up when you blue it in.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl wrote:
>>
>> is it a bad idea to buy a used locker? I may be able to get a used
>> detroit
>> for $50, which is considerably cheaper than a new lockright at $230.
>>
>> Carl
It's located far away so I told him I just want the locker. You're probably
right -you usually are- .. I think I'll just shell out the $$ for a new one.
Is a locker difficult to install?
Carl
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4349F61C.30057296@***.net...
> I've never been lucky. I can see there it might a perfectly good in
> someone's gear change. But more than likely it was separated because the
> ring exploded. It will show up when you blue it in.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl wrote:
>>
>> is it a bad idea to buy a used locker? I may be able to get a used
>> detroit
>> for $50, which is considerably cheaper than a new lockright at $230.
>>
>> Carl
10-10-2005, 01:12 AM
#22
Guest
Posts: n/a
Re: Trac - Loc
The one I'm looking at is in an apparently good rear end with 4.10 gears.
It's located far away so I told him I just want the locker. You're probably
right -you usually are- .. I think I'll just shell out the $$ for a new one.
Is a locker difficult to install?
Carl
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4349F61C.30057296@***.net...
> I've never been lucky. I can see there it might a perfectly good in
> someone's gear change. But more than likely it was separated because the
> ring exploded. It will show up when you blue it in.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl wrote:
>>
>> is it a bad idea to buy a used locker? I may be able to get a used
>> detroit
>> for $50, which is considerably cheaper than a new lockright at $230.
>>
>> Carl
It's located far away so I told him I just want the locker. You're probably
right -you usually are- .. I think I'll just shell out the $$ for a new one.
Is a locker difficult to install?
Carl
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4349F61C.30057296@***.net...
> I've never been lucky. I can see there it might a perfectly good in
> someone's gear change. But more than likely it was separated because the
> ring exploded. It will show up when you blue it in.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl wrote:
>>
>> is it a bad idea to buy a used locker? I may be able to get a used
>> detroit
>> for $50, which is considerably cheaper than a new lockright at $230.
>>
>> Carl
10-10-2005, 01:23 AM
#23
Guest
Posts: n/a
Re: Trac - Loc
Bill-
What about this one?
http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578
Carl
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4349F61C.30057296@***.net...
> I've never been lucky. I can see there it might a perfectly good in
> someone's gear change. But more than likely it was separated because the
> ring exploded. It will show up when you blue it in.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl wrote:
>>
>> is it a bad idea to buy a used locker? I may be able to get a used
>> detroit
>> for $50, which is considerably cheaper than a new lockright at $230.
>>
>> Carl
What about this one?
http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578
Carl
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4349F61C.30057296@***.net...
> I've never been lucky. I can see there it might a perfectly good in
> someone's gear change. But more than likely it was separated because the
> ring exploded. It will show up when you blue it in.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl wrote:
>>
>> is it a bad idea to buy a used locker? I may be able to get a used
>> detroit
>> for $50, which is considerably cheaper than a new lockright at $230.
>>
>> Carl
10-10-2005, 01:23 AM
#24
Guest
Posts: n/a
Re: Trac - Loc
Bill-
What about this one?
http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578
Carl
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4349F61C.30057296@***.net...
> I've never been lucky. I can see there it might a perfectly good in
> someone's gear change. But more than likely it was separated because the
> ring exploded. It will show up when you blue it in.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl wrote:
>>
>> is it a bad idea to buy a used locker? I may be able to get a used
>> detroit
>> for $50, which is considerably cheaper than a new lockright at $230.
>>
>> Carl
What about this one?
http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578
Carl
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4349F61C.30057296@***.net...
> I've never been lucky. I can see there it might a perfectly good in
> someone's gear change. But more than likely it was separated because the
> ring exploded. It will show up when you blue it in.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl wrote:
>>
>> is it a bad idea to buy a used locker? I may be able to get a used
>> detroit
>> for $50, which is considerably cheaper than a new lockright at $230.
>>
>> Carl
10-10-2005, 01:23 AM
#25
Guest
Posts: n/a
Re: Trac - Loc
Bill-
What about this one?
http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578
Carl
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4349F61C.30057296@***.net...
> I've never been lucky. I can see there it might a perfectly good in
> someone's gear change. But more than likely it was separated because the
> ring exploded. It will show up when you blue it in.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl wrote:
>>
>> is it a bad idea to buy a used locker? I may be able to get a used
>> detroit
>> for $50, which is considerably cheaper than a new lockright at $230.
>>
>> Carl
What about this one?
http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578
Carl
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4349F61C.30057296@***.net...
> I've never been lucky. I can see there it might a perfectly good in
> someone's gear change. But more than likely it was separated because the
> ring exploded. It will show up when you blue it in.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl wrote:
>>
>> is it a bad idea to buy a used locker? I may be able to get a used
>> detroit
>> for $50, which is considerably cheaper than a new lockright at $230.
>>
>> Carl
10-10-2005, 01:30 AM
#26
Guest
Posts: n/a
Re: Trac - Loc
Hi Carl,
The Lock Right locker from Powertrax will slip right in place of
your spiders, but it's not very strong. The Detroit will take a bunch of
precise tools and a junk drawer full of shims to bring her in, may be
better to let a professional take responsibility for it:
http://www.differentials.com/install.html
http://www.----------.com/dana35c/TJDana35.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl wrote:
>
> The one I'm looking at is in an apparently good rear end with 4.10 gears.
> It's located far away so I told him I just want the locker. You're probably
> right -you usually are- .. I think I'll just shell out the $$ for a new one.
>
> Is a locker difficult to install?
>
> Carl
The Lock Right locker from Powertrax will slip right in place of
your spiders, but it's not very strong. The Detroit will take a bunch of
precise tools and a junk drawer full of shims to bring her in, may be
better to let a professional take responsibility for it:
http://www.differentials.com/install.html
http://www.----------.com/dana35c/TJDana35.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl wrote:
>
> The one I'm looking at is in an apparently good rear end with 4.10 gears.
> It's located far away so I told him I just want the locker. You're probably
> right -you usually are- .. I think I'll just shell out the $$ for a new one.
>
> Is a locker difficult to install?
>
> Carl
10-10-2005, 01:30 AM
#27
Guest
Posts: n/a
Re: Trac - Loc
Hi Carl,
The Lock Right locker from Powertrax will slip right in place of
your spiders, but it's not very strong. The Detroit will take a bunch of
precise tools and a junk drawer full of shims to bring her in, may be
better to let a professional take responsibility for it:
http://www.differentials.com/install.html
http://www.----------.com/dana35c/TJDana35.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl wrote:
>
> The one I'm looking at is in an apparently good rear end with 4.10 gears.
> It's located far away so I told him I just want the locker. You're probably
> right -you usually are- .. I think I'll just shell out the $$ for a new one.
>
> Is a locker difficult to install?
>
> Carl
The Lock Right locker from Powertrax will slip right in place of
your spiders, but it's not very strong. The Detroit will take a bunch of
precise tools and a junk drawer full of shims to bring her in, may be
better to let a professional take responsibility for it:
http://www.differentials.com/install.html
http://www.----------.com/dana35c/TJDana35.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl wrote:
>
> The one I'm looking at is in an apparently good rear end with 4.10 gears.
> It's located far away so I told him I just want the locker. You're probably
> right -you usually are- .. I think I'll just shell out the $$ for a new one.
>
> Is a locker difficult to install?
>
> Carl
10-10-2005, 01:30 AM
#28
Guest
Posts: n/a
Re: Trac - Loc
Hi Carl,
The Lock Right locker from Powertrax will slip right in place of
your spiders, but it's not very strong. The Detroit will take a bunch of
precise tools and a junk drawer full of shims to bring her in, may be
better to let a professional take responsibility for it:
http://www.differentials.com/install.html
http://www.----------.com/dana35c/TJDana35.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl wrote:
>
> The one I'm looking at is in an apparently good rear end with 4.10 gears.
> It's located far away so I told him I just want the locker. You're probably
> right -you usually are- .. I think I'll just shell out the $$ for a new one.
>
> Is a locker difficult to install?
>
> Carl
The Lock Right locker from Powertrax will slip right in place of
your spiders, but it's not very strong. The Detroit will take a bunch of
precise tools and a junk drawer full of shims to bring her in, may be
better to let a professional take responsibility for it:
http://www.differentials.com/install.html
http://www.----------.com/dana35c/TJDana35.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl wrote:
>
> The one I'm looking at is in an apparently good rear end with 4.10 gears.
> It's located far away so I told him I just want the locker. You're probably
> right -you usually are- .. I think I'll just shell out the $$ for a new one.
>
> Is a locker difficult to install?
>
> Carl
10-10-2005, 01:48 AM
#29
Guest
Posts: n/a
Re: Trac - Loc
Hi Carl,
That's what I hate about EBay! What you're looking at is the Locker
box and the old stock open differential. The Detroit will look machined
like the one at: http://www.4x4wire.com/jeep/reviews/super35d/
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl wrote:
>
> Bill-
> What about this one?
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578
>
> Carl
That's what I hate about EBay! What you're looking at is the Locker
box and the old stock open differential. The Detroit will look machined
like the one at: http://www.4x4wire.com/jeep/reviews/super35d/
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl wrote:
>
> Bill-
> What about this one?
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578
>
> Carl
10-10-2005, 01:48 AM
#30
Guest
Posts: n/a
Re: Trac - Loc
Hi Carl,
That's what I hate about EBay! What you're looking at is the Locker
box and the old stock open differential. The Detroit will look machined
like the one at: http://www.4x4wire.com/jeep/reviews/super35d/
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl wrote:
>
> Bill-
> What about this one?
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578
>
> Carl
That's what I hate about EBay! What you're looking at is the Locker
box and the old stock open differential. The Detroit will look machined
like the one at: http://www.4x4wire.com/jeep/reviews/super35d/
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl wrote:
>
> Bill-
> What about this one?
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578
>
> Carl