Tow Hitch on New Wrangler?
02-22-2004, 10:48 AM
#21
Guest
Posts: n/a
Re: Tow Hitch on New Wrangler?
Any pix Harry?
L8r - Jersey
> I made my own from a 6" scheduled 80 pipe, bought some 2" square tubing,
> 1/2" gussets to the pipe, used the gussets for the safety chains and
welded
> round end caps. I have lots of people ask me where I had bought it and it
> only cost me a mere $85.00 for the materials and my time.
> --
> HarryS
> JAFGBR
> JAFTJO
>
>
L8r - Jersey
> I made my own from a 6" scheduled 80 pipe, bought some 2" square tubing,
> 1/2" gussets to the pipe, used the gussets for the safety chains and
welded
> round end caps. I have lots of people ask me where I had bought it and it
> only cost me a mere $85.00 for the materials and my time.
> --
> HarryS
> JAFGBR
> JAFTJO
>
>
02-22-2004, 10:48 AM
#22
Guest
Posts: n/a
Re: Tow Hitch on New Wrangler?
Any pix Harry?
L8r - Jersey
> I made my own from a 6" scheduled 80 pipe, bought some 2" square tubing,
> 1/2" gussets to the pipe, used the gussets for the safety chains and
welded
> round end caps. I have lots of people ask me where I had bought it and it
> only cost me a mere $85.00 for the materials and my time.
> --
> HarryS
> JAFGBR
> JAFTJO
>
>
L8r - Jersey
> I made my own from a 6" scheduled 80 pipe, bought some 2" square tubing,
> 1/2" gussets to the pipe, used the gussets for the safety chains and
welded
> round end caps. I have lots of people ask me where I had bought it and it
> only cost me a mere $85.00 for the materials and my time.
> --
> HarryS
> JAFGBR
> JAFTJO
>
>
02-22-2004, 01:00 PM
#23
Guest
Posts: n/a
Re: Tow Hitch on New Wrangler?
Nope, I built it for my sons 69 cj and plan to do the same for my 04 yj, I
will post a pic when I get it done.
--
HarryS
JAFGBR
JAFTJO
"Jersey" <IamHellbound@comcast.net> wrote in message
news:c-mdnf35mbajUqXdRVn-jQ@comcast.com...
> Any pix Harry?
>
> L8r - Jersey
>
> > I made my own from a 6" scheduled 80 pipe, bought some 2" square tubing,
> > 1/2" gussets to the pipe, used the gussets for the safety chains and
> welded
> > round end caps. I have lots of people ask me where I had bought it and
it
> > only cost me a mere $85.00 for the materials and my time.
> > --
> > HarryS
> > JAFGBR
> > JAFTJO
> >
> >
>
>
will post a pic when I get it done.
--
HarryS
JAFGBR
JAFTJO
"Jersey" <IamHellbound@comcast.net> wrote in message
news:c-mdnf35mbajUqXdRVn-jQ@comcast.com...
> Any pix Harry?
>
> L8r - Jersey
>
> > I made my own from a 6" scheduled 80 pipe, bought some 2" square tubing,
> > 1/2" gussets to the pipe, used the gussets for the safety chains and
> welded
> > round end caps. I have lots of people ask me where I had bought it and
it
> > only cost me a mere $85.00 for the materials and my time.
> > --
> > HarryS
> > JAFGBR
> > JAFTJO
> >
> >
>
>
02-22-2004, 01:00 PM
#24
Guest
Posts: n/a
Re: Tow Hitch on New Wrangler?
Nope, I built it for my sons 69 cj and plan to do the same for my 04 yj, I
will post a pic when I get it done.
--
HarryS
JAFGBR
JAFTJO
"Jersey" <IamHellbound@comcast.net> wrote in message
news:c-mdnf35mbajUqXdRVn-jQ@comcast.com...
> Any pix Harry?
>
> L8r - Jersey
>
> > I made my own from a 6" scheduled 80 pipe, bought some 2" square tubing,
> > 1/2" gussets to the pipe, used the gussets for the safety chains and
> welded
> > round end caps. I have lots of people ask me where I had bought it and
it
> > only cost me a mere $85.00 for the materials and my time.
> > --
> > HarryS
> > JAFGBR
> > JAFTJO
> >
> >
>
>
will post a pic when I get it done.
--
HarryS
JAFGBR
JAFTJO
"Jersey" <IamHellbound@comcast.net> wrote in message
news:c-mdnf35mbajUqXdRVn-jQ@comcast.com...
> Any pix Harry?
>
> L8r - Jersey
>
> > I made my own from a 6" scheduled 80 pipe, bought some 2" square tubing,
> > 1/2" gussets to the pipe, used the gussets for the safety chains and
> welded
> > round end caps. I have lots of people ask me where I had bought it and
it
> > only cost me a mere $85.00 for the materials and my time.
> > --
> > HarryS
> > JAFGBR
> > JAFTJO
> >
> >
>
>
02-22-2004, 01:00 PM
#25
Guest
Posts: n/a
Re: Tow Hitch on New Wrangler?
Nope, I built it for my sons 69 cj and plan to do the same for my 04 yj, I
will post a pic when I get it done.
--
HarryS
JAFGBR
JAFTJO
"Jersey" <IamHellbound@comcast.net> wrote in message
news:c-mdnf35mbajUqXdRVn-jQ@comcast.com...
> Any pix Harry?
>
> L8r - Jersey
>
> > I made my own from a 6" scheduled 80 pipe, bought some 2" square tubing,
> > 1/2" gussets to the pipe, used the gussets for the safety chains and
> welded
> > round end caps. I have lots of people ask me where I had bought it and
it
> > only cost me a mere $85.00 for the materials and my time.
> > --
> > HarryS
> > JAFGBR
> > JAFTJO
> >
> >
>
>
will post a pic when I get it done.
--
HarryS
JAFGBR
JAFTJO
"Jersey" <IamHellbound@comcast.net> wrote in message
news:c-mdnf35mbajUqXdRVn-jQ@comcast.com...
> Any pix Harry?
>
> L8r - Jersey
>
> > I made my own from a 6" scheduled 80 pipe, bought some 2" square tubing,
> > 1/2" gussets to the pipe, used the gussets for the safety chains and
> welded
> > round end caps. I have lots of people ask me where I had bought it and
it
> > only cost me a mere $85.00 for the materials and my time.
> > --
> > HarryS
> > JAFGBR
> > JAFTJO
> >
> >
>
>
02-22-2004, 01:09 PM
#26
Guest
Posts: n/a
Re: Tow Hitch on New Wrangler?
In <ANqdnak1BOaVDaXdRVn-ug@comcast.com> Jersey wrote:
> has the 2" receiver. I pulled a buddies home-built 4 x 8
> trailer (lightly loaded) at speeds up to 80 mph & could
> barely tell the trailer was there.
If you actually put a load on it and try to stop and/or maneuver
evasively, it will let you know it is still there.
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
> has the 2" receiver. I pulled a buddies home-built 4 x 8
> trailer (lightly loaded) at speeds up to 80 mph & could
> barely tell the trailer was there.
If you actually put a load on it and try to stop and/or maneuver
evasively, it will let you know it is still there.
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
02-22-2004, 01:09 PM
#27
Guest
Posts: n/a
Re: Tow Hitch on New Wrangler?
In <ANqdnak1BOaVDaXdRVn-ug@comcast.com> Jersey wrote:
> has the 2" receiver. I pulled a buddies home-built 4 x 8
> trailer (lightly loaded) at speeds up to 80 mph & could
> barely tell the trailer was there.
If you actually put a load on it and try to stop and/or maneuver
evasively, it will let you know it is still there.
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
> has the 2" receiver. I pulled a buddies home-built 4 x 8
> trailer (lightly loaded) at speeds up to 80 mph & could
> barely tell the trailer was there.
If you actually put a load on it and try to stop and/or maneuver
evasively, it will let you know it is still there.
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
02-22-2004, 01:09 PM
#28
Guest
Posts: n/a
Re: Tow Hitch on New Wrangler?
In <ANqdnak1BOaVDaXdRVn-ug@comcast.com> Jersey wrote:
> has the 2" receiver. I pulled a buddies home-built 4 x 8
> trailer (lightly loaded) at speeds up to 80 mph & could
> barely tell the trailer was there.
If you actually put a load on it and try to stop and/or maneuver
evasively, it will let you know it is still there.
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
> has the 2" receiver. I pulled a buddies home-built 4 x 8
> trailer (lightly loaded) at speeds up to 80 mph & could
> barely tell the trailer was there.
If you actually put a load on it and try to stop and/or maneuver
evasively, it will let you know it is still there.
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
02-22-2004, 04:55 PM
#29
Guest
Posts: n/a
Re: Tow Hitch on New Wrangler?
That happens even without the trailer!
L8r
"Del Rawlins" <del@_kills_spammers_rawlinsbrothers.org> wrote in message
news:20040222091036002-0900@enews.newsguy.com...
> In <ANqdnak1BOaVDaXdRVn-ug@comcast.com> Jersey wrote:
>
> > has the 2" receiver. I pulled a buddies home-built 4 x 8
> > trailer (lightly loaded) at speeds up to 80 mph & could
> > barely tell the trailer was there.
>
> If you actually put a load on it and try to stop and/or maneuver
> evasively, it will let you know it is still there.
>
> ----------------------------------------------------
> Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
> Remove _kills_spammers_ to reply via email.
> Unofficial Bearhawk FAQ website:
> http://www.rawlinsbrothers.org/bhfaq/
L8r
"Del Rawlins" <del@_kills_spammers_rawlinsbrothers.org> wrote in message
news:20040222091036002-0900@enews.newsguy.com...
> In <ANqdnak1BOaVDaXdRVn-ug@comcast.com> Jersey wrote:
>
> > has the 2" receiver. I pulled a buddies home-built 4 x 8
> > trailer (lightly loaded) at speeds up to 80 mph & could
> > barely tell the trailer was there.
>
> If you actually put a load on it and try to stop and/or maneuver
> evasively, it will let you know it is still there.
>
> ----------------------------------------------------
> Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
> Remove _kills_spammers_ to reply via email.
> Unofficial Bearhawk FAQ website:
> http://www.rawlinsbrothers.org/bhfaq/
02-22-2004, 04:55 PM
#30
Guest
Posts: n/a
Re: Tow Hitch on New Wrangler?
That happens even without the trailer!
L8r
"Del Rawlins" <del@_kills_spammers_rawlinsbrothers.org> wrote in message
news:20040222091036002-0900@enews.newsguy.com...
> In <ANqdnak1BOaVDaXdRVn-ug@comcast.com> Jersey wrote:
>
> > has the 2" receiver. I pulled a buddies home-built 4 x 8
> > trailer (lightly loaded) at speeds up to 80 mph & could
> > barely tell the trailer was there.
>
> If you actually put a load on it and try to stop and/or maneuver
> evasively, it will let you know it is still there.
>
> ----------------------------------------------------
> Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
> Remove _kills_spammers_ to reply via email.
> Unofficial Bearhawk FAQ website:
> http://www.rawlinsbrothers.org/bhfaq/
L8r
"Del Rawlins" <del@_kills_spammers_rawlinsbrothers.org> wrote in message
news:20040222091036002-0900@enews.newsguy.com...
> In <ANqdnak1BOaVDaXdRVn-ug@comcast.com> Jersey wrote:
>
> > has the 2" receiver. I pulled a buddies home-built 4 x 8
> > trailer (lightly loaded) at speeds up to 80 mph & could
> > barely tell the trailer was there.
>
> If you actually put a load on it and try to stop and/or maneuver
> evasively, it will let you know it is still there.
>
> ----------------------------------------------------
> Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
> Remove _kills_spammers_ to reply via email.
> Unofficial Bearhawk FAQ website:
> http://www.rawlinsbrothers.org/bhfaq/
