On-Topic Trans Question
07-15-2007, 10:40 AM
#11
Guest
Posts: n/a
Re: On-Topic Trans Question
Before investing much time on this transmission, I would verify that first
gear is indeed the granny gear you think it is. You can do this by counting
teeth on the gears or how many input shaft turns it takes to turn the output
shaft once in first.
Earle
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com. ..
> CJ,
>
> Haven't heard from you in a long time. I suppose that's b/c I don't
> subscribe to the FE big-block NG anymore. Advance adaptors should have
what
> they need to convert that T-18 for use behind whatever they want. Give
them
> a call and see.
>
> As far as the input shaft, it would probably have to be swapped. Advance
> adaptors may have a provision for this as well.
> http://www.advanceadapters.com/
>
> And no, I am not affiliated with Advance.
>
> Carl
>
>
> "CobraJet" <shedding@skin.molt> wrote in message
> news:140720071558213799%shedding@skin.molt...
> > I thought I'd ask this before I slither back outta here. Goatboi do
> > not bother replying, because I'm sure you will be wrong.
> >
> > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
> > me that these are popular for the Jeep rock climber guys because of the
> > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
> > has a somewhat unique input shaft dimension.
> >
> > The question is: what would a Jeepster do to use this in his
> > vehicle? Is there a bellhousing that adapts? What about the input
> > shaft? If I decide to sell this trans I'd like to give accurate info to
> > the prospective purchaser.
> >
> > --
> > CobraJet
>
>
--
Posted via a free Usenet account from http://www.teranews.com
gear is indeed the granny gear you think it is. You can do this by counting
teeth on the gears or how many input shaft turns it takes to turn the output
shaft once in first.
Earle
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com. ..
> CJ,
>
> Haven't heard from you in a long time. I suppose that's b/c I don't
> subscribe to the FE big-block NG anymore. Advance adaptors should have
what
> they need to convert that T-18 for use behind whatever they want. Give
them
> a call and see.
>
> As far as the input shaft, it would probably have to be swapped. Advance
> adaptors may have a provision for this as well.
> http://www.advanceadapters.com/
>
> And no, I am not affiliated with Advance.
>
> Carl
>
>
> "CobraJet" <shedding@skin.molt> wrote in message
> news:140720071558213799%shedding@skin.molt...
> > I thought I'd ask this before I slither back outta here. Goatboi do
> > not bother replying, because I'm sure you will be wrong.
> >
> > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
> > me that these are popular for the Jeep rock climber guys because of the
> > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
> > has a somewhat unique input shaft dimension.
> >
> > The question is: what would a Jeepster do to use this in his
> > vehicle? Is there a bellhousing that adapts? What about the input
> > shaft? If I decide to sell this trans I'd like to give accurate info to
> > the prospective purchaser.
> >
> > --
> > CobraJet
>
>
--
Posted via a free Usenet account from http://www.teranews.com
07-15-2007, 10:40 AM
#12
Guest
Posts: n/a
Re: On-Topic Trans Question
Before investing much time on this transmission, I would verify that first
gear is indeed the granny gear you think it is. You can do this by counting
teeth on the gears or how many input shaft turns it takes to turn the output
shaft once in first.
Earle
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com. ..
> CJ,
>
> Haven't heard from you in a long time. I suppose that's b/c I don't
> subscribe to the FE big-block NG anymore. Advance adaptors should have
what
> they need to convert that T-18 for use behind whatever they want. Give
them
> a call and see.
>
> As far as the input shaft, it would probably have to be swapped. Advance
> adaptors may have a provision for this as well.
> http://www.advanceadapters.com/
>
> And no, I am not affiliated with Advance.
>
> Carl
>
>
> "CobraJet" <shedding@skin.molt> wrote in message
> news:140720071558213799%shedding@skin.molt...
> > I thought I'd ask this before I slither back outta here. Goatboi do
> > not bother replying, because I'm sure you will be wrong.
> >
> > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
> > me that these are popular for the Jeep rock climber guys because of the
> > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
> > has a somewhat unique input shaft dimension.
> >
> > The question is: what would a Jeepster do to use this in his
> > vehicle? Is there a bellhousing that adapts? What about the input
> > shaft? If I decide to sell this trans I'd like to give accurate info to
> > the prospective purchaser.
> >
> > --
> > CobraJet
>
>
--
Posted via a free Usenet account from http://www.teranews.com
gear is indeed the granny gear you think it is. You can do this by counting
teeth on the gears or how many input shaft turns it takes to turn the output
shaft once in first.
Earle
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com. ..
> CJ,
>
> Haven't heard from you in a long time. I suppose that's b/c I don't
> subscribe to the FE big-block NG anymore. Advance adaptors should have
what
> they need to convert that T-18 for use behind whatever they want. Give
them
> a call and see.
>
> As far as the input shaft, it would probably have to be swapped. Advance
> adaptors may have a provision for this as well.
> http://www.advanceadapters.com/
>
> And no, I am not affiliated with Advance.
>
> Carl
>
>
> "CobraJet" <shedding@skin.molt> wrote in message
> news:140720071558213799%shedding@skin.molt...
> > I thought I'd ask this before I slither back outta here. Goatboi do
> > not bother replying, because I'm sure you will be wrong.
> >
> > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
> > me that these are popular for the Jeep rock climber guys because of the
> > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
> > has a somewhat unique input shaft dimension.
> >
> > The question is: what would a Jeepster do to use this in his
> > vehicle? Is there a bellhousing that adapts? What about the input
> > shaft? If I decide to sell this trans I'd like to give accurate info to
> > the prospective purchaser.
> >
> > --
> > CobraJet
>
>
--
Posted via a free Usenet account from http://www.teranews.com
07-15-2007, 10:40 AM
#13
Guest
Posts: n/a
Re: On-Topic Trans Question
Before investing much time on this transmission, I would verify that first
gear is indeed the granny gear you think it is. You can do this by counting
teeth on the gears or how many input shaft turns it takes to turn the output
shaft once in first.
Earle
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com. ..
> CJ,
>
> Haven't heard from you in a long time. I suppose that's b/c I don't
> subscribe to the FE big-block NG anymore. Advance adaptors should have
what
> they need to convert that T-18 for use behind whatever they want. Give
them
> a call and see.
>
> As far as the input shaft, it would probably have to be swapped. Advance
> adaptors may have a provision for this as well.
> http://www.advanceadapters.com/
>
> And no, I am not affiliated with Advance.
>
> Carl
>
>
> "CobraJet" <shedding@skin.molt> wrote in message
> news:140720071558213799%shedding@skin.molt...
> > I thought I'd ask this before I slither back outta here. Goatboi do
> > not bother replying, because I'm sure you will be wrong.
> >
> > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
> > me that these are popular for the Jeep rock climber guys because of the
> > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
> > has a somewhat unique input shaft dimension.
> >
> > The question is: what would a Jeepster do to use this in his
> > vehicle? Is there a bellhousing that adapts? What about the input
> > shaft? If I decide to sell this trans I'd like to give accurate info to
> > the prospective purchaser.
> >
> > --
> > CobraJet
>
>
--
Posted via a free Usenet account from http://www.teranews.com
gear is indeed the granny gear you think it is. You can do this by counting
teeth on the gears or how many input shaft turns it takes to turn the output
shaft once in first.
Earle
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com. ..
> CJ,
>
> Haven't heard from you in a long time. I suppose that's b/c I don't
> subscribe to the FE big-block NG anymore. Advance adaptors should have
what
> they need to convert that T-18 for use behind whatever they want. Give
them
> a call and see.
>
> As far as the input shaft, it would probably have to be swapped. Advance
> adaptors may have a provision for this as well.
> http://www.advanceadapters.com/
>
> And no, I am not affiliated with Advance.
>
> Carl
>
>
> "CobraJet" <shedding@skin.molt> wrote in message
> news:140720071558213799%shedding@skin.molt...
> > I thought I'd ask this before I slither back outta here. Goatboi do
> > not bother replying, because I'm sure you will be wrong.
> >
> > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
> > me that these are popular for the Jeep rock climber guys because of the
> > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
> > has a somewhat unique input shaft dimension.
> >
> > The question is: what would a Jeepster do to use this in his
> > vehicle? Is there a bellhousing that adapts? What about the input
> > shaft? If I decide to sell this trans I'd like to give accurate info to
> > the prospective purchaser.
> >
> > --
> > CobraJet
>
>
--
Posted via a free Usenet account from http://www.teranews.com
07-15-2007, 02:41 PM
#14
Guest
Posts: n/a
Re: On-Topic Trans Question
Got out of Go-fast cars a long time ago. Now I'm into go-slow. Really slow.
As in granny low tranmission 4.1 gear reduction transfer case, with 4.10 or
lower diff gears. :-D
How are things on the home front?
Carl
"Sea Jhett" <riptide@malibu.com> wrote in message
news:150720070529437296%riptide@malibu.com...
> In article <wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com>, Carl S
> <carlsaiyed@REMOVE.hotmail.com> wrote:
>
>> CJ,
>>
>> Haven't heard from you in a long time. I suppose that's b/c I don't
>> subscribe to the FE big-block NG anymore.
>
> Good reason :)
>
>> Advance adaptors should have what
>> they need to convert that T-18 for use behind whatever they want. Give
>> them
>> a call and see.
>>
>> As far as the input shaft, it would probably have to be swapped. Advance
>> adaptors may have a provision for this as well.
>> http://www.advanceadapters.com/
>>
>> And no, I am not affiliated with Advance.
>
> Thanks for the lead. Wouldn't matter to me if you were employed by
> Advance, as long as the info is what I need. My group's charter
> actually allows for limited *on-topic* advertising, so if Vic Edelbrock
> himself showed up touting a new manifold or heads (yeah, like that
> would ever happen), it is no prob.
>
> What are you doing these days?
>
>>
>> Carl
>>
>>
>> "CobraJet" <shedding@skin.molt> wrote in message
>> news:140720071558213799%shedding@skin.molt...
>> > I thought I'd ask this before I slither back outta here. Goatboi do
>> > not bother replying, because I'm sure you will be wrong.
>> >
>> > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
>> > me that these are popular for the Jeep rock climber guys because of the
>> > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
>> > has a somewhat unique input shaft dimension.
>> >
>> > The question is: what would a Jeepster do to use this in his
>> > vehicle? Is there a bellhousing that adapts? What about the input
>> > shaft? If I decide to sell this trans I'd like to give accurate info to
>> > the prospective purchaser.
>> >
>> > --
>> > CobraJet
>>
>>
As in granny low tranmission 4.1 gear reduction transfer case, with 4.10 or
lower diff gears. :-D
How are things on the home front?
Carl
"Sea Jhett" <riptide@malibu.com> wrote in message
news:150720070529437296%riptide@malibu.com...
> In article <wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com>, Carl S
> <carlsaiyed@REMOVE.hotmail.com> wrote:
>
>> CJ,
>>
>> Haven't heard from you in a long time. I suppose that's b/c I don't
>> subscribe to the FE big-block NG anymore.
>
> Good reason :)
>
>> Advance adaptors should have what
>> they need to convert that T-18 for use behind whatever they want. Give
>> them
>> a call and see.
>>
>> As far as the input shaft, it would probably have to be swapped. Advance
>> adaptors may have a provision for this as well.
>> http://www.advanceadapters.com/
>>
>> And no, I am not affiliated with Advance.
>
> Thanks for the lead. Wouldn't matter to me if you were employed by
> Advance, as long as the info is what I need. My group's charter
> actually allows for limited *on-topic* advertising, so if Vic Edelbrock
> himself showed up touting a new manifold or heads (yeah, like that
> would ever happen), it is no prob.
>
> What are you doing these days?
>
>>
>> Carl
>>
>>
>> "CobraJet" <shedding@skin.molt> wrote in message
>> news:140720071558213799%shedding@skin.molt...
>> > I thought I'd ask this before I slither back outta here. Goatboi do
>> > not bother replying, because I'm sure you will be wrong.
>> >
>> > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
>> > me that these are popular for the Jeep rock climber guys because of the
>> > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
>> > has a somewhat unique input shaft dimension.
>> >
>> > The question is: what would a Jeepster do to use this in his
>> > vehicle? Is there a bellhousing that adapts? What about the input
>> > shaft? If I decide to sell this trans I'd like to give accurate info to
>> > the prospective purchaser.
>> >
>> > --
>> > CobraJet
>>
>>
07-15-2007, 02:41 PM
#15
Guest
Posts: n/a
Re: On-Topic Trans Question
Got out of Go-fast cars a long time ago. Now I'm into go-slow. Really slow.
As in granny low tranmission 4.1 gear reduction transfer case, with 4.10 or
lower diff gears. :-D
How are things on the home front?
Carl
"Sea Jhett" <riptide@malibu.com> wrote in message
news:150720070529437296%riptide@malibu.com...
> In article <wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com>, Carl S
> <carlsaiyed@REMOVE.hotmail.com> wrote:
>
>> CJ,
>>
>> Haven't heard from you in a long time. I suppose that's b/c I don't
>> subscribe to the FE big-block NG anymore.
>
> Good reason :)
>
>> Advance adaptors should have what
>> they need to convert that T-18 for use behind whatever they want. Give
>> them
>> a call and see.
>>
>> As far as the input shaft, it would probably have to be swapped. Advance
>> adaptors may have a provision for this as well.
>> http://www.advanceadapters.com/
>>
>> And no, I am not affiliated with Advance.
>
> Thanks for the lead. Wouldn't matter to me if you were employed by
> Advance, as long as the info is what I need. My group's charter
> actually allows for limited *on-topic* advertising, so if Vic Edelbrock
> himself showed up touting a new manifold or heads (yeah, like that
> would ever happen), it is no prob.
>
> What are you doing these days?
>
>>
>> Carl
>>
>>
>> "CobraJet" <shedding@skin.molt> wrote in message
>> news:140720071558213799%shedding@skin.molt...
>> > I thought I'd ask this before I slither back outta here. Goatboi do
>> > not bother replying, because I'm sure you will be wrong.
>> >
>> > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
>> > me that these are popular for the Jeep rock climber guys because of the
>> > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
>> > has a somewhat unique input shaft dimension.
>> >
>> > The question is: what would a Jeepster do to use this in his
>> > vehicle? Is there a bellhousing that adapts? What about the input
>> > shaft? If I decide to sell this trans I'd like to give accurate info to
>> > the prospective purchaser.
>> >
>> > --
>> > CobraJet
>>
>>
As in granny low tranmission 4.1 gear reduction transfer case, with 4.10 or
lower diff gears. :-D
How are things on the home front?
Carl
"Sea Jhett" <riptide@malibu.com> wrote in message
news:150720070529437296%riptide@malibu.com...
> In article <wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com>, Carl S
> <carlsaiyed@REMOVE.hotmail.com> wrote:
>
>> CJ,
>>
>> Haven't heard from you in a long time. I suppose that's b/c I don't
>> subscribe to the FE big-block NG anymore.
>
> Good reason :)
>
>> Advance adaptors should have what
>> they need to convert that T-18 for use behind whatever they want. Give
>> them
>> a call and see.
>>
>> As far as the input shaft, it would probably have to be swapped. Advance
>> adaptors may have a provision for this as well.
>> http://www.advanceadapters.com/
>>
>> And no, I am not affiliated with Advance.
>
> Thanks for the lead. Wouldn't matter to me if you were employed by
> Advance, as long as the info is what I need. My group's charter
> actually allows for limited *on-topic* advertising, so if Vic Edelbrock
> himself showed up touting a new manifold or heads (yeah, like that
> would ever happen), it is no prob.
>
> What are you doing these days?
>
>>
>> Carl
>>
>>
>> "CobraJet" <shedding@skin.molt> wrote in message
>> news:140720071558213799%shedding@skin.molt...
>> > I thought I'd ask this before I slither back outta here. Goatboi do
>> > not bother replying, because I'm sure you will be wrong.
>> >
>> > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
>> > me that these are popular for the Jeep rock climber guys because of the
>> > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
>> > has a somewhat unique input shaft dimension.
>> >
>> > The question is: what would a Jeepster do to use this in his
>> > vehicle? Is there a bellhousing that adapts? What about the input
>> > shaft? If I decide to sell this trans I'd like to give accurate info to
>> > the prospective purchaser.
>> >
>> > --
>> > CobraJet
>>
>>
07-15-2007, 02:41 PM
#16
Guest
Posts: n/a
Re: On-Topic Trans Question
Got out of Go-fast cars a long time ago. Now I'm into go-slow. Really slow.
As in granny low tranmission 4.1 gear reduction transfer case, with 4.10 or
lower diff gears. :-D
How are things on the home front?
Carl
"Sea Jhett" <riptide@malibu.com> wrote in message
news:150720070529437296%riptide@malibu.com...
> In article <wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com>, Carl S
> <carlsaiyed@REMOVE.hotmail.com> wrote:
>
>> CJ,
>>
>> Haven't heard from you in a long time. I suppose that's b/c I don't
>> subscribe to the FE big-block NG anymore.
>
> Good reason :)
>
>> Advance adaptors should have what
>> they need to convert that T-18 for use behind whatever they want. Give
>> them
>> a call and see.
>>
>> As far as the input shaft, it would probably have to be swapped. Advance
>> adaptors may have a provision for this as well.
>> http://www.advanceadapters.com/
>>
>> And no, I am not affiliated with Advance.
>
> Thanks for the lead. Wouldn't matter to me if you were employed by
> Advance, as long as the info is what I need. My group's charter
> actually allows for limited *on-topic* advertising, so if Vic Edelbrock
> himself showed up touting a new manifold or heads (yeah, like that
> would ever happen), it is no prob.
>
> What are you doing these days?
>
>>
>> Carl
>>
>>
>> "CobraJet" <shedding@skin.molt> wrote in message
>> news:140720071558213799%shedding@skin.molt...
>> > I thought I'd ask this before I slither back outta here. Goatboi do
>> > not bother replying, because I'm sure you will be wrong.
>> >
>> > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
>> > me that these are popular for the Jeep rock climber guys because of the
>> > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
>> > has a somewhat unique input shaft dimension.
>> >
>> > The question is: what would a Jeepster do to use this in his
>> > vehicle? Is there a bellhousing that adapts? What about the input
>> > shaft? If I decide to sell this trans I'd like to give accurate info to
>> > the prospective purchaser.
>> >
>> > --
>> > CobraJet
>>
>>
As in granny low tranmission 4.1 gear reduction transfer case, with 4.10 or
lower diff gears. :-D
How are things on the home front?
Carl
"Sea Jhett" <riptide@malibu.com> wrote in message
news:150720070529437296%riptide@malibu.com...
> In article <wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com>, Carl S
> <carlsaiyed@REMOVE.hotmail.com> wrote:
>
>> CJ,
>>
>> Haven't heard from you in a long time. I suppose that's b/c I don't
>> subscribe to the FE big-block NG anymore.
>
> Good reason :)
>
>> Advance adaptors should have what
>> they need to convert that T-18 for use behind whatever they want. Give
>> them
>> a call and see.
>>
>> As far as the input shaft, it would probably have to be swapped. Advance
>> adaptors may have a provision for this as well.
>> http://www.advanceadapters.com/
>>
>> And no, I am not affiliated with Advance.
>
> Thanks for the lead. Wouldn't matter to me if you were employed by
> Advance, as long as the info is what I need. My group's charter
> actually allows for limited *on-topic* advertising, so if Vic Edelbrock
> himself showed up touting a new manifold or heads (yeah, like that
> would ever happen), it is no prob.
>
> What are you doing these days?
>
>>
>> Carl
>>
>>
>> "CobraJet" <shedding@skin.molt> wrote in message
>> news:140720071558213799%shedding@skin.molt...
>> > I thought I'd ask this before I slither back outta here. Goatboi do
>> > not bother replying, because I'm sure you will be wrong.
>> >
>> > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
>> > me that these are popular for the Jeep rock climber guys because of the
>> > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
>> > has a somewhat unique input shaft dimension.
>> >
>> > The question is: what would a Jeepster do to use this in his
>> > vehicle? Is there a bellhousing that adapts? What about the input
>> > shaft? If I decide to sell this trans I'd like to give accurate info to
>> > the prospective purchaser.
>> >
>> > --
>> > CobraJet
>>
>>
07-15-2007, 02:41 PM
#17
Guest
Posts: n/a
Re: On-Topic Trans Question
Got out of Go-fast cars a long time ago. Now I'm into go-slow. Really slow.
As in granny low tranmission 4.1 gear reduction transfer case, with 4.10 or
lower diff gears. :-D
How are things on the home front?
Carl
"Sea Jhett" <riptide@malibu.com> wrote in message
news:150720070529437296%riptide@malibu.com...
> In article <wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com>, Carl S
> <carlsaiyed@REMOVE.hotmail.com> wrote:
>
>> CJ,
>>
>> Haven't heard from you in a long time. I suppose that's b/c I don't
>> subscribe to the FE big-block NG anymore.
>
> Good reason :)
>
>> Advance adaptors should have what
>> they need to convert that T-18 for use behind whatever they want. Give
>> them
>> a call and see.
>>
>> As far as the input shaft, it would probably have to be swapped. Advance
>> adaptors may have a provision for this as well.
>> http://www.advanceadapters.com/
>>
>> And no, I am not affiliated with Advance.
>
> Thanks for the lead. Wouldn't matter to me if you were employed by
> Advance, as long as the info is what I need. My group's charter
> actually allows for limited *on-topic* advertising, so if Vic Edelbrock
> himself showed up touting a new manifold or heads (yeah, like that
> would ever happen), it is no prob.
>
> What are you doing these days?
>
>>
>> Carl
>>
>>
>> "CobraJet" <shedding@skin.molt> wrote in message
>> news:140720071558213799%shedding@skin.molt...
>> > I thought I'd ask this before I slither back outta here. Goatboi do
>> > not bother replying, because I'm sure you will be wrong.
>> >
>> > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
>> > me that these are popular for the Jeep rock climber guys because of the
>> > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
>> > has a somewhat unique input shaft dimension.
>> >
>> > The question is: what would a Jeepster do to use this in his
>> > vehicle? Is there a bellhousing that adapts? What about the input
>> > shaft? If I decide to sell this trans I'd like to give accurate info to
>> > the prospective purchaser.
>> >
>> > --
>> > CobraJet
>>
>>
As in granny low tranmission 4.1 gear reduction transfer case, with 4.10 or
lower diff gears. :-D
How are things on the home front?
Carl
"Sea Jhett" <riptide@malibu.com> wrote in message
news:150720070529437296%riptide@malibu.com...
> In article <wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com>, Carl S
> <carlsaiyed@REMOVE.hotmail.com> wrote:
>
>> CJ,
>>
>> Haven't heard from you in a long time. I suppose that's b/c I don't
>> subscribe to the FE big-block NG anymore.
>
> Good reason :)
>
>> Advance adaptors should have what
>> they need to convert that T-18 for use behind whatever they want. Give
>> them
>> a call and see.
>>
>> As far as the input shaft, it would probably have to be swapped. Advance
>> adaptors may have a provision for this as well.
>> http://www.advanceadapters.com/
>>
>> And no, I am not affiliated with Advance.
>
> Thanks for the lead. Wouldn't matter to me if you were employed by
> Advance, as long as the info is what I need. My group's charter
> actually allows for limited *on-topic* advertising, so if Vic Edelbrock
> himself showed up touting a new manifold or heads (yeah, like that
> would ever happen), it is no prob.
>
> What are you doing these days?
>
>>
>> Carl
>>
>>
>> "CobraJet" <shedding@skin.molt> wrote in message
>> news:140720071558213799%shedding@skin.molt...
>> > I thought I'd ask this before I slither back outta here. Goatboi do
>> > not bother replying, because I'm sure you will be wrong.
>> >
>> > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
>> > me that these are popular for the Jeep rock climber guys because of the
>> > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
>> > has a somewhat unique input shaft dimension.
>> >
>> > The question is: what would a Jeepster do to use this in his
>> > vehicle? Is there a bellhousing that adapts? What about the input
>> > shaft? If I decide to sell this trans I'd like to give accurate info to
>> > the prospective purchaser.
>> >
>> > --
>> > CobraJet
>>
>>
07-15-2007, 03:36 PM
#18
Guest
Posts: n/a
Re: On-Topic Trans Question
In article <469a25b3$0$16337$88260bb3@free.teranews.com>, Earle Horton
<el_anglo_burgues@usa.com> wrote:
> Before investing much time on this transmission, I would verify that first
> gear is indeed the granny gear you think it is. You can do this by counting
> teeth on the gears or how many input shaft turns it takes to turn the output
> shaft once in first.
I thought all T-18's were low 1st (?), but that is easy enough. I do
plan to pop the top on it for inspection and pics. I may opt to move
the whole stickshift scenario over to the '72 F-250, which is presently
an automatic. Not sure yet. Thanks!
>
> Earle
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com. ..
> > CJ,
> >
> > Haven't heard from you in a long time. I suppose that's b/c I don't
> > subscribe to the FE big-block NG anymore. Advance adaptors should have
> what
> > they need to convert that T-18 for use behind whatever they want. Give
> them
> > a call and see.
> >
> > As far as the input shaft, it would probably have to be swapped. Advance
> > adaptors may have a provision for this as well.
> > http://www.advanceadapters.com/
> >
> > And no, I am not affiliated with Advance.
> >
> > Carl
> >
> >
> > "CobraJet" <shedding@skin.molt> wrote in message
> > news:140720071558213799%shedding@skin.molt...
> > > I thought I'd ask this before I slither back outta here. Goatboi do
> > > not bother replying, because I'm sure you will be wrong.
> > >
> > > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
> > > me that these are popular for the Jeep rock climber guys because of the
> > > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
> > > has a somewhat unique input shaft dimension.
> > >
> > > The question is: what would a Jeepster do to use this in his
> > > vehicle? Is there a bellhousing that adapts? What about the input
> > > shaft? If I decide to sell this trans I'd like to give accurate info to
> > > the prospective purchaser.
> > >
> > > --
> > > CobraJet
> >
> >
--
CobraJet
<el_anglo_burgues@usa.com> wrote:
> Before investing much time on this transmission, I would verify that first
> gear is indeed the granny gear you think it is. You can do this by counting
> teeth on the gears or how many input shaft turns it takes to turn the output
> shaft once in first.
I thought all T-18's were low 1st (?), but that is easy enough. I do
plan to pop the top on it for inspection and pics. I may opt to move
the whole stickshift scenario over to the '72 F-250, which is presently
an automatic. Not sure yet. Thanks!
>
> Earle
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com. ..
> > CJ,
> >
> > Haven't heard from you in a long time. I suppose that's b/c I don't
> > subscribe to the FE big-block NG anymore. Advance adaptors should have
> what
> > they need to convert that T-18 for use behind whatever they want. Give
> them
> > a call and see.
> >
> > As far as the input shaft, it would probably have to be swapped. Advance
> > adaptors may have a provision for this as well.
> > http://www.advanceadapters.com/
> >
> > And no, I am not affiliated with Advance.
> >
> > Carl
> >
> >
> > "CobraJet" <shedding@skin.molt> wrote in message
> > news:140720071558213799%shedding@skin.molt...
> > > I thought I'd ask this before I slither back outta here. Goatboi do
> > > not bother replying, because I'm sure you will be wrong.
> > >
> > > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
> > > me that these are popular for the Jeep rock climber guys because of the
> > > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
> > > has a somewhat unique input shaft dimension.
> > >
> > > The question is: what would a Jeepster do to use this in his
> > > vehicle? Is there a bellhousing that adapts? What about the input
> > > shaft? If I decide to sell this trans I'd like to give accurate info to
> > > the prospective purchaser.
> > >
> > > --
> > > CobraJet
> >
> >
--
CobraJet
07-15-2007, 03:36 PM
#19
Guest
Posts: n/a
Re: On-Topic Trans Question
In article <469a25b3$0$16337$88260bb3@free.teranews.com>, Earle Horton
<el_anglo_burgues@usa.com> wrote:
> Before investing much time on this transmission, I would verify that first
> gear is indeed the granny gear you think it is. You can do this by counting
> teeth on the gears or how many input shaft turns it takes to turn the output
> shaft once in first.
I thought all T-18's were low 1st (?), but that is easy enough. I do
plan to pop the top on it for inspection and pics. I may opt to move
the whole stickshift scenario over to the '72 F-250, which is presently
an automatic. Not sure yet. Thanks!
>
> Earle
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com. ..
> > CJ,
> >
> > Haven't heard from you in a long time. I suppose that's b/c I don't
> > subscribe to the FE big-block NG anymore. Advance adaptors should have
> what
> > they need to convert that T-18 for use behind whatever they want. Give
> them
> > a call and see.
> >
> > As far as the input shaft, it would probably have to be swapped. Advance
> > adaptors may have a provision for this as well.
> > http://www.advanceadapters.com/
> >
> > And no, I am not affiliated with Advance.
> >
> > Carl
> >
> >
> > "CobraJet" <shedding@skin.molt> wrote in message
> > news:140720071558213799%shedding@skin.molt...
> > > I thought I'd ask this before I slither back outta here. Goatboi do
> > > not bother replying, because I'm sure you will be wrong.
> > >
> > > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
> > > me that these are popular for the Jeep rock climber guys because of the
> > > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
> > > has a somewhat unique input shaft dimension.
> > >
> > > The question is: what would a Jeepster do to use this in his
> > > vehicle? Is there a bellhousing that adapts? What about the input
> > > shaft? If I decide to sell this trans I'd like to give accurate info to
> > > the prospective purchaser.
> > >
> > > --
> > > CobraJet
> >
> >
--
CobraJet
<el_anglo_burgues@usa.com> wrote:
> Before investing much time on this transmission, I would verify that first
> gear is indeed the granny gear you think it is. You can do this by counting
> teeth on the gears or how many input shaft turns it takes to turn the output
> shaft once in first.
I thought all T-18's were low 1st (?), but that is easy enough. I do
plan to pop the top on it for inspection and pics. I may opt to move
the whole stickshift scenario over to the '72 F-250, which is presently
an automatic. Not sure yet. Thanks!
>
> Earle
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com. ..
> > CJ,
> >
> > Haven't heard from you in a long time. I suppose that's b/c I don't
> > subscribe to the FE big-block NG anymore. Advance adaptors should have
> what
> > they need to convert that T-18 for use behind whatever they want. Give
> them
> > a call and see.
> >
> > As far as the input shaft, it would probably have to be swapped. Advance
> > adaptors may have a provision for this as well.
> > http://www.advanceadapters.com/
> >
> > And no, I am not affiliated with Advance.
> >
> > Carl
> >
> >
> > "CobraJet" <shedding@skin.molt> wrote in message
> > news:140720071558213799%shedding@skin.molt...
> > > I thought I'd ask this before I slither back outta here. Goatboi do
> > > not bother replying, because I'm sure you will be wrong.
> > >
> > > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
> > > me that these are popular for the Jeep rock climber guys because of the
> > > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
> > > has a somewhat unique input shaft dimension.
> > >
> > > The question is: what would a Jeepster do to use this in his
> > > vehicle? Is there a bellhousing that adapts? What about the input
> > > shaft? If I decide to sell this trans I'd like to give accurate info to
> > > the prospective purchaser.
> > >
> > > --
> > > CobraJet
> >
> >
--
CobraJet
07-15-2007, 03:36 PM
#20
Guest
Posts: n/a
Re: On-Topic Trans Question
In article <469a25b3$0$16337$88260bb3@free.teranews.com>, Earle Horton
<el_anglo_burgues@usa.com> wrote:
> Before investing much time on this transmission, I would verify that first
> gear is indeed the granny gear you think it is. You can do this by counting
> teeth on the gears or how many input shaft turns it takes to turn the output
> shaft once in first.
I thought all T-18's were low 1st (?), but that is easy enough. I do
plan to pop the top on it for inspection and pics. I may opt to move
the whole stickshift scenario over to the '72 F-250, which is presently
an automatic. Not sure yet. Thanks!
>
> Earle
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com. ..
> > CJ,
> >
> > Haven't heard from you in a long time. I suppose that's b/c I don't
> > subscribe to the FE big-block NG anymore. Advance adaptors should have
> what
> > they need to convert that T-18 for use behind whatever they want. Give
> them
> > a call and see.
> >
> > As far as the input shaft, it would probably have to be swapped. Advance
> > adaptors may have a provision for this as well.
> > http://www.advanceadapters.com/
> >
> > And no, I am not affiliated with Advance.
> >
> > Carl
> >
> >
> > "CobraJet" <shedding@skin.molt> wrote in message
> > news:140720071558213799%shedding@skin.molt...
> > > I thought I'd ask this before I slither back outta here. Goatboi do
> > > not bother replying, because I'm sure you will be wrong.
> > >
> > > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
> > > me that these are popular for the Jeep rock climber guys because of the
> > > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
> > > has a somewhat unique input shaft dimension.
> > >
> > > The question is: what would a Jeepster do to use this in his
> > > vehicle? Is there a bellhousing that adapts? What about the input
> > > shaft? If I decide to sell this trans I'd like to give accurate info to
> > > the prospective purchaser.
> > >
> > > --
> > > CobraJet
> >
> >
--
CobraJet
<el_anglo_burgues@usa.com> wrote:
> Before investing much time on this transmission, I would verify that first
> gear is indeed the granny gear you think it is. You can do this by counting
> teeth on the gears or how many input shaft turns it takes to turn the output
> shaft once in first.
I thought all T-18's were low 1st (?), but that is easy enough. I do
plan to pop the top on it for inspection and pics. I may opt to move
the whole stickshift scenario over to the '72 F-250, which is presently
an automatic. Not sure yet. Thanks!
>
> Earle
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:wNOdnUn1hcuRZATbnZ2dnUVZ_oGlnZ2d@comcast.com. ..
> > CJ,
> >
> > Haven't heard from you in a long time. I suppose that's b/c I don't
> > subscribe to the FE big-block NG anymore. Advance adaptors should have
> what
> > they need to convert that T-18 for use behind whatever they want. Give
> them
> > a call and see.
> >
> > As far as the input shaft, it would probably have to be swapped. Advance
> > adaptors may have a provision for this as well.
> > http://www.advanceadapters.com/
> >
> > And no, I am not affiliated with Advance.
> >
> > Carl
> >
> >
> > "CobraJet" <shedding@skin.molt> wrote in message
> > news:140720071558213799%shedding@skin.molt...
> > > I thought I'd ask this before I slither back outta here. Goatboi do
> > > not bother replying, because I'm sure you will be wrong.
> > >
> > > I'm pulling a T-18 out of a '70 Phordhh pickup. Someone mentioned to
> > > me that these are popular for the Jeep rock climber guys because of the
> > > 6.69 (or so) 1st gear. However, this box is behind an FE engine, which
> > > has a somewhat unique input shaft dimension.
> > >
> > > The question is: what would a Jeepster do to use this in his
> > > vehicle? Is there a bellhousing that adapts? What about the input
> > > shaft? If I decide to sell this trans I'd like to give accurate info to
> > > the prospective purchaser.
> > >
> > > --
> > > CobraJet
> >
> >
--
CobraJet
